| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <7hpnkx2aet.fsf@baylibre.com>
Date: Thu, 22 Aug 2019 13:49:14 -0700
From: Kevin Hilman <khilman@...libre.com>
To: Neil Armstrong <narmstrong@...libre.com>, jbrunet@...libre.com
Cc: Neil Armstrong <narmstrong@...libre.com>,
linux-clk@...r.kernel.org, linux-amlogic@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 6/6] arm64: dts: meson-sm1-sei610: enable DVFS
Neil Armstrong <narmstrong@...libre.com> writes:
> This enables DVFS for the Amlogic SM1 based SEI610 board by:
> - Adding the SM1 SoC OPPs taken from the vendor tree
> - Selecting the SM1 Clock controller instead of the G12A one
> - Adding the CPU rail regulator, PWM and OPPs for each CPU nodes.
>
> Each power supply can achieve 0.69V to 1.05V using a single PWM
> output clocked at 666KHz with an inverse duty-cycle.
>
> DVFS has been tested by running the arm64 cpuburn at [1] and cycling
> between all the possible cpufreq translations of each cluster and
> checking the final frequency using the clock-measurer, script at [2].
>
> [1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S
> [2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f
>
> Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
Reviewed-by: Kevin Hilman <khilman@...libre.com>
Tested-by: Kevin Hilman <khilman@...libre.com>
Tested on meson-sm1-sei610 board using the userspace govenor to manually
walk through the available frequencies.
I'll queue this up when there's a stable clock tag I can use for patch
5/6.
Kevin
> ---
> .../boot/dts/amlogic/meson-sm1-sei610.dts | 59 ++++++++++++++--
> arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 69 +++++++++++++++++++
> 2 files changed, 124 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> index 36ac2e4b970d..69966e2e0611 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> @@ -19,10 +19,6 @@
> ethernet0 = ðmac;
> };
>
> - chosen {
> - stdout-path = "serial0:115200n8";
> - };
> -
> emmc_pwrseq: emmc-pwrseq {
> compatible = "mmc-pwrseq-emmc";
> reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
> @@ -136,6 +132,25 @@
> regulator-always-on;
> };
>
> + vddcpu: regulator-vddcpu {
> + /*
> + * SY8120B1ABC DC/DC Regulator.
> + */
> + compatible = "pwm-regulator";
> +
> + regulator-name = "VDDCPU";
> + regulator-min-microvolt = <690000>;
> + regulator-max-microvolt = <1050000>;
> +
> + vin-supply = <&dc_in>;
> +
> + pwms = <&pwm_AO_cd 1 1500 0>;
> + pwm-dutycycle-range = <100 0>;
> +
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> vddio_ao1v8: regulator-vddio_ao1v8 {
> compatible = "regulator-fixed";
> regulator-name = "VDDIO_AO1V8";
> @@ -182,6 +197,34 @@
> hdmi-phandle = <&hdmi_tx>;
> };
>
> +&cpu0 {
> + cpu-supply = <&vddcpu>;
> + operating-points-v2 = <&cpu_opp_table>;
> + clocks = <&clkc CLKID_CPU_CLK>;
> + clock-latency = <50000>;
> +};
> +
> +&cpu1 {
> + cpu-supply = <&vddcpu>;
> + operating-points-v2 = <&cpu_opp_table>;
> + clocks = <&clkc CLKID_CPU1_CLK>;
> + clock-latency = <50000>;
> +};
> +
> +&cpu2 {
> + cpu-supply = <&vddcpu>;
> + operating-points-v2 = <&cpu_opp_table>;
> + clocks = <&clkc CLKID_CPU2_CLK>;
> + clock-latency = <50000>;
> +};
> +
> +&cpu3 {
> + cpu-supply = <&vddcpu>;
> + operating-points-v2 = <&cpu_opp_table>;
> + clocks = <&clkc CLKID_CPU3_CLK>;
> + clock-latency = <50000>;
> +};
> +
> ðmac {
> status = "okay";
> phy-handle = <&internal_ephy>;
> @@ -220,6 +263,14 @@
> clock-names = "clkin0";
> };
>
> +&pwm_AO_cd {
> + pinctrl-0 = <&pwm_ao_d_e_pins>;
> + pinctrl-names = "default";
> + clocks = <&xtal>;
> + clock-names = "clkin1";
> + status = "okay";
> +};
> +
> &pwm_ef {
> status = "okay";
> pinctrl-0 = <&pwm_e_pins>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> index 37064d7f66c1..2b61406b0610 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> @@ -50,6 +50,71 @@
> compatible = "cache";
> };
> };
> +
> + cpu_opp_table: opp-table {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp-100000000 {
> + opp-hz = /bits/ 64 <100000000>;
> + opp-microvolt = <730000>;
> + };
> +
> + opp-250000000 {
> + opp-hz = /bits/ 64 <250000000>;
> + opp-microvolt = <730000>;
> + };
> +
> + opp-500000000 {
> + opp-hz = /bits/ 64 <500000000>;
> + opp-microvolt = <730000>;
> + };
> +
> + opp-667000000 {
> + opp-hz = /bits/ 64 <666666666>;
> + opp-microvolt = <750000>;
> + };
> +
> + opp-1000000000 {
> + opp-hz = /bits/ 64 <1000000000>;
> + opp-microvolt = <770000>;
> + };
> +
> + opp-1200000000 {
> + opp-hz = /bits/ 64 <1200000000>;
> + opp-microvolt = <780000>;
> + };
> +
> + opp-1404000000 {
> + opp-hz = /bits/ 64 <1404000000>;
> + opp-microvolt = <790000>;
> + };
> +
> + opp-1512000000 {
> + opp-hz = /bits/ 64 <1500000000>;
> + opp-microvolt = <800000>;
> + };
> +
> + opp-1608000000 {
> + opp-hz = /bits/ 64 <1608000000>;
> + opp-microvolt = <810000>;
> + };
> +
> + opp-1704000000 {
> + opp-hz = /bits/ 64 <1704000000>;
> + opp-microvolt = <850000>;
> + };
> +
> + opp-1800000000 {
> + opp-hz = /bits/ 64 <1800000000>;
> + opp-microvolt = <900000>;
> + };
> +
> + opp-1908000000 {
> + opp-hz = /bits/ 64 <1908000000>;
> + opp-microvolt = <950000>;
> + };
> + };
> };
>
> &cecb_AO {
> @@ -60,6 +125,10 @@
> compatible = "amlogic,meson-sm1-clk-measure";
> };
>
> +&clkc {
> + compatible = "amlogic,sm1-clkc";
> +};
> +
> ðmac {
> power-domains = <&pwrc PWRC_SM1_ETH_ID>;
> };
> --
> 2.22.0
Powered by blists - more mailing lists