[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAPDyKFrDPxFMm710Z25i-euOT2rrgCNXVa4na-fye0xamMXq_A@mail.gmail.com>
Date: Thu, 22 Aug 2019 13:45:19 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Andrew Jeffery <andrew@...id.au>
Cc: Joel Stanley <joel@....id.au>,
linux-mmc <linux-mmc@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Adrian Hunter <adrian.hunter@...el.com>,
devicetree <devicetree@...r.kernel.org>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
linux-aspeed <linux-aspeed@...ts.ozlabs.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Ryan Chen <ryanchen.aspeed@...il.com>
Subject: Re: [PATCH v5 1/2] dt-bindings: mmc: Document Aspeed SD controller
On Thu, 15 Aug 2019 at 07:37, Andrew Jeffery <andrew@...id.au> wrote:
>
>
>
> On Thu, 15 Aug 2019, at 15:06, Joel Stanley wrote:
> > On Wed, 7 Aug 2019 at 00:38, Andrew Jeffery <andrew@...id.au> wrote:
> > >
> > > The ASPEED SD/SDIO/MMC controller exposes two slots implementing the
> > > SDIO Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit
> > > data bus if only a single slot is enabled.
> > >
> > > Signed-off-by: Andrew Jeffery <andrew@...id.au>
> >
> > Reviewed-by: Joel Stanley <joel@....id.au>
> >
> > Two minor comments below.
> >
> > > +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> > > @@ -0,0 +1,105 @@
> > > +# SPDX-License-Identifier: GPL-2.0-or-later
> >
> > No "Copyright IBM" ?
>
> I'm going rogue.
>
> That reminds me I should chase up where we got to with the binding
> licensing.
>
> >
> > > +%YAML 1.2
> > > +---
> >
> > > +
> > > +examples:
> > > + - |
> > > + #include <dt-bindings/clock/aspeed-clock.h>
> > > + sdc@...40000 {
> > > + compatible = "aspeed,ast2500-sd-controller";
> > > + reg = <0x1e740000 0x100>;
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + ranges = <0 0x1e740000 0x10000>;
> >
> > According to the datasheet this could be 0x20000. It does not matter
> > though, as there's nothing in it past 0x300.
>
> Good catch.
>
Are you planning on sending a v6 or you want me to apply this and you
can post a patch on top?
Kind regards
Uffe
Powered by blists - more mailing lists