[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <fd9897b6-edc9-f88f-4393-62050bd66710@partner.samsung.com>
Date: Thu, 22 Aug 2019 15:18:50 +0200
From: Kamil Konieczny <k.konieczny@...tner.samsung.com>
To: MyungJoo Ham <myungjoo.ham@...sung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Krzysztof Kozlowski <krzk@...nel.org>,
Kukjin Kim <kgene@...nel.org>,
Kyungmin Park <kyungmin.park@...sung.com>,
Mark Rutland <mark.rutland@....com>,
Nishanth Menon <nm@...com>, Rob Herring <robh+dt@...nel.org>,
Stephen Boyd <sboyd@...nel.org>,
Viresh Kumar <vireshk@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org, linux-samsung-soc@...r.kernel.org
Subject: Re: [RESEND PATCH v5 0/4] add coupled regulators for
Exynos5422/5800
Dear MyungJoo,
On 08.08.2019 11:02, Kamil Konieczny wrote:
> Hi,
>
> The main purpose of this patch series is to add coupled regulators for
> Exynos5422/5800 to keep constrain on voltage difference between vdd_arm
> and vdd_int to be at most 300mV. In exynos-bus instead of using
> regulator_set_voltage_tol() with default voltage tolerance it should be
> used regulator_set_voltage_triplet() with volatege range, and this is
> already present in opp/core.c code, so it can be reused. While at this,
> move setting regulators into opp/core.
>
> This patchset was tested on Odroid XU3.
>
> The DTS coupled regulators patch depends on previous patches.
>
> Changes:
> v5:
> - squashed last patch "remove exynos_bus_passive_target()" into second
> - added Acked-by to patch "correct clock enable sequence"
Could you please merge patches 1/4 and 2/4 for v5.4
(they were already Ack-ed by Chanwoo Choi)?
--
Best regards,
Kamil Konieczny
Samsung R&D Institute Poland
> v4:
> - removed "opp: core: add regulators enable and disable" from patchset
> as it was applied by Viresh Kumar and changed cover letter
> - fix patch "devfreq: exynos-bus: correct clock enable sequence" to
> correct order of enable/disable
> - removed unrelated changes in "devfreq: exynos-bus: convert to use
> dev_pm_opp_set_rate()"
> - added new patch "devfreq: exynos-bus: remove exynos_bus_passive_target()"
> as suggested by Chanwoo Choi
> v3:
> - added new exynos-bus patch to correct clock and regulator enabling
> and disabling sequence as suggested by Chanwoo Choi
> - corrected error path in enable and improved commit message in opp/core
> - improve comment in devfreq/exynos-bus.c before devfreq_recommended_opp()
> - change cover letter as there is new patch
> - added note before Signed-off-by in 4th patch
> v2:
> - improve regulators enable/disable code in opp/core as suggested by
> Viresh Kumar
> - add new patch for remove unused dt-bindings as suggested by Krzysztof
> Kozlowski
>
> Kamil Konieczny (3):
> devfreq: exynos-bus: correct clock enable sequence
> devfreq: exynos-bus: convert to use dev_pm_opp_set_rate()
> dt-bindings: devfreq: exynos-bus: remove unused property
>
> Marek Szyprowski (1):
> ARM: dts: exynos: add initial data for coupled regulators for
> Exynos5422/5800
>
> .../bindings/devfreq/exynos-bus.txt | 2 -
> arch/arm/boot/dts/exynos5420.dtsi | 34 ++--
> arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 4 +
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 4 +
> arch/arm/boot/dts/exynos5800.dtsi | 32 ++--
> drivers/devfreq/exynos-bus.c | 153 +++++-------------
> 6 files changed, 78 insertions(+), 151 deletions(-)
>
Powered by blists - more mailing lists