Message-ID: <CALDO+SaRNMvmXrQqOtNiRsOkgfOQAW4EA2yVgmeoGQto2zvfMQ@mail.gmail.com>
Date:   Thu, 22 Aug 2019 09:07:50 -0700
From:   William Tu <u9012063@...il.com>
To:     Ilya Maximets <i.maximets@...sung.com>
Cc:     Alexander Duyck <alexander.duyck@...il.com>,
        Björn Töpel <bjorn.topel@...el.com>,
        Netdev <netdev@...r.kernel.org>,
        LKML <linux-kernel@...r.kernel.org>, bpf <bpf@...r.kernel.org>,
        "David S. Miller" <davem@...emloft.net>,
        Magnus Karlsson <magnus.karlsson@...el.com>,
        Jakub Kicinski <jakub.kicinski@...ronome.com>,
        Alexei Starovoitov <ast@...nel.org>,
        Daniel Borkmann <daniel@...earbox.net>,
        Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
        intel-wired-lan <intel-wired-lan@...ts.osuosl.org>,
        Eelco Chaudron <echaudro@...hat.com>
Subject: Re: [PATCH net] ixgbe: fix double clean of tx descriptors with xdp

On Thu, Aug 22, 2019 at 1:17 AM Ilya Maximets <i.maximets@...sung.com> wrote:
>
> On 22.08.2019 0:38, William Tu wrote:
> > On Wed, Aug 21, 2019 at 9:57 AM Alexander Duyck
> > <alexander.duyck@...il.com> wrote:
> >>
> >> On Wed, Aug 21, 2019 at 9:22 AM Ilya Maximets <i.maximets@...sung.com> wrote:
> >>>
> >>> On 21.08.2019 4:17, Alexander Duyck wrote:
> >>>> On Tue, Aug 20, 2019 at 8:58 AM Ilya Maximets <i.maximets@...sung.com> wrote:
> >>>>>
> >>>>> On 20.08.2019 18:35, Alexander Duyck wrote:
> >>>>>> On Tue, Aug 20, 2019 at 8:18 AM Ilya Maximets <i.maximets@...sung.com> wrote:
> >>>>>>>
> >>>>>>> Tx code doesn't clear the descriptor status after cleaning.
> >>>>>>> So, if the budget is larger than number of used elems in a ring, some
> >>>>>>> descriptors will be accounted twice and xsk_umem_complete_tx will move
> >>>>>>> prod_tail far beyond the prod_head breaking the comletion queue ring.
> >>>>>>>
> >>>>>>> Fix that by limiting the number of descriptors to clean by the number
> >>>>>>> of used descriptors in the tx ring.
> >>>>>>>
> >>>>>>> Fixes: 8221c5eba8c1 ("ixgbe: add AF_XDP zero-copy Tx support")
> >>>>>>> Signed-off-by: Ilya Maximets <i.maximets@...sung.com>
> >>>>>>
> >>>>>> I'm not sure this is the best way to go. My preference would be to
> >>>>>> have something in the ring that would prevent us from racing which I
> >>>>>> don't think this really addresses. I am pretty sure this code is safe
> >>>>>> on x86 but I would be worried about weak ordered systems such as
> >>>>>> PowerPC.
> >>>>>>
> >>>>>> It might make sense to look at adding the eop_desc logic like we have
> >>>>>> in the regular path with a proper barrier before we write it and after
> >>>>>> we read it. So for example we could hold of on writing the bytecount
> >>>>>> value until the end of an iteration and call smp_wmb before we write
> >>>>>> it. Then on the cleanup we could read it and if it is non-zero we take
> >>>>>> an smp_rmb before proceeding further to process the Tx descriptor and
> >>>>>> clearing the value. Otherwise this code is going to just keep popping
> >>>>>> up with issues.
> >>>>>
> >>>>> But, unlike regular case, xdp zero-copy xmit and clean for particular
> >>>>> tx ring always happens in the same NAPI context and even on the same
> >>>>> CPU core.
> >>>>>
> >>>>> I saw the 'eop_desc' manipulations in regular case and yes, we could
> >>>>> use 'next_to_watch' field just as a flag of descriptor existence,
> >>>>> but it seems unnecessarily complicated. Am I missing something?
> >>>>>
> >>>>
> >>>> So is it always in the same NAPI context?. I forgot, I was thinking
> >>>> that somehow the socket could possibly make use of XDP for transmit.
> >>>
> >>> AF_XDP socket only triggers tx interrupt on ndo_xsk_async_xmit() which
> >>> is used in zero-copy mode. Real xmit happens inside
> >>> ixgbe_poll()
> >>>  -> ixgbe_clean_xdp_tx_irq()
> >>>     -> ixgbe_xmit_zc()
> >>>
> >>> This should be not possible to bound another XDP socket to the same netdev
> >>> queue.
> >>>
> >>> It also possible to xmit frames in xdp_ring while performing XDP_TX/REDIRECT
> >>> actions. REDIRECT could happen from different netdev with different NAPI
> >>> context, but this operation is bound to specific CPU core and each core has
> >>> its own xdp_ring.
> >>>
> >>> However, I'm not an expert here.
> >>> Björn, maybe you could comment on this?
> >>>
> >>>>
> >>>> As far as the logic to use I would be good with just using a value you
> >>>> are already setting such as the bytecount value. All that would need
> >>>> to happen is to guarantee that the value is cleared in the Tx path. So
> >>>> if you clear the bytecount in ixgbe_clean_xdp_tx_irq you could
> >>>> theoretically just use that as well to flag that a descriptor has been
> >>>> populated and is ready to be cleaned. Assuming the logic about this
> >>>> all being in the same NAPI context anyway you wouldn't need to mess
> >>>> with the barrier stuff I mentioned before.
> >>>
> >>> Checking the number of used descs, i.e. next_to_use - next_to_clean,
> >>> makes iteration in this function logically equal to the iteration inside
> >>> 'ixgbe_xsk_clean_tx_ring()'. Do you think we need to change the later
> >>> function too to follow same 'bytecount' approach? I don't like having
> >>> two different ways to determine number of used descriptors in the same file.
> >>>
> >>> Best regards, Ilya Maximets.
> >>
> >> As far as ixgbe_clean_xdp_tx_irq() vs ixgbe_xsk_clean_tx_ring(), I
> >> would say that if you got rid of budget and framed things more like
> >> how ixgbe_xsk_clean_tx_ring was framed with the ntc != ntu being
> >> obvious I would prefer to see us go that route.
> >>
> >> Really there is no need for budget in ixgbe_clean_xdp_tx_irq() if you
> >> are going to be working with a static ntu value since you will only
> >> ever process one iteration through the ring anyway. It might make more
> >> sense if you just went through and got rid of budget and i, and
> >> instead used ntc and ntu like what was done in
> >> ixgbe_xsk_clean_tx_ring().
> >>
> >> Thanks.
> >>
> >> - Alex
> >
> > Not familiar with the driver details.
> > I tested this patch and the issue mentioned in OVS mailing list.
> > https://www.mail-archive.com/ovs-dev@openvswitch.org/msg35362.html
> > and indeed the problem goes away.
>
> Good. Thanks for testing!
>
> > But I saw a huge performance drop,
> > my AF_XDP tx performance drops from >9Mpps to <5Mpps.
>
> I didn't expect so big performance difference with this change.
> What is your test scenario?

I was using OVS with dual port NIC, setting one OpenFlow rule
in_port=eth2 actions=output:eth3
and eth2 for rx and measure eth3 tx
'sar -n DEV 1'  shows pretty huge drop on eth3 tx.

> Is it possible that you're accounting same
> packet several times due to broken completion queue?

That's possible.
Let me double check on your v2 patch.

@Eelco: do you also see some performance difference?

Regards,
William

>
> Looking at samples/bpf/xdpsock_user.c:complete_tx_only(), it accounts
> sent packets (tx_npkts) by accumulating results of xsk_ring_cons__peek()
> for completion queue, so it's not a trusted source of pps information.
>
> Best regards, Ilya Maximets.
>
> >
> > Tested using kernel 5.3.0-rc3+
> > 03:00.0 Ethernet controller: Intel Corporation Ethernet Controller
> > 10-Gigabit X540-AT2 (rev 01)
> > Subsystem: Intel Corporation Ethernet 10G 2P X540-t Adapter
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > Stepping- SERR- FastB2B- DisINTx+
> >
> > Regards,
> > William

Powered by blists - more mailing lists