linux-kernel - RE: [PATCH V8 1/3] mmc: sdhci-pci-o2micro: Change O2 Host PLL and DLL register name

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <MWHPR16MB14555AB570D340E138FDAB1E8BA50@MWHPR16MB1455.namprd16.prod.outlook.com>
Date:   Thu, 22 Aug 2019 16:16:18 +0000
From:   "Shirley Her (SC)" <shirley.her@...hubtech.com>
To:     Ulf Hansson <ulf.hansson@...aro.org>
CC:     "adrian.hunter@...el.com" <adrian.hunter@...el.com>,
        "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "Chevron Li (WH)" <chevron.li@...hubtech.com>,
        "Shaper Liu (WH)" <shaper.liu@...hubtech.com>,
        "Louis Lu (TP)" <louis.lu@...hubtech.com>,
        "Max Huang (SC)" <max.huang@...hubtech.com>
Subject: RE: [PATCH V8 1/3] mmc: sdhci-pci-o2micro: Change O2 Host PLL and DLL
 register name

Sorry about the confusion and they are the same, please review the 2nd one. One of the email address is wrong when I send the 1st one.

Thanks for your help,
Shirley

-----Original Message-----
From: Ulf Hansson [mailto:ulf.hansson@...aro.org] 
Sent: Thursday, August 22, 2019 1:35 AM
To: Shirley Her (SC) <shirley.her@...hubtech.com>
Cc: adrian.hunter@...el.com; linux-mmc@...r.kernel.org; linux-kernel@...r.kernel.org; Chevron Li (WH) <chevron.li@...hubtech.com>; Shaper Liu (WH) <shaper.liu@...hubtech.com>; Louis Lu (TP) <louis.lu@...hubtech.com>; Max Huang (SC) <max.huang@...hubtech.com>
Subject: Re: [PATCH V8 1/3] mmc: sdhci-pci-o2micro: Change O2 Host PLL and DLL register name

On Wed, 21 Aug 2019 at 20:38, Shirley Her (SC) <shirley.her@...hubtech.com> wrote:
>
> Change O2 Host PLL and DLL register name
>
> Signed-off-by: Shirley Her <shirley.her@...hubtech.com>

It seems like you managed to post the version 8, two times. Is there any difference? Which one should we review?

Kind regards
Uffe

> ---
> change in V8:
>  1. fix patch format error
>
> change in V7:
>  1. change subject
>
> change in V6:
>  1. change subject and commit message to match the patch  2. change 
> register name O2_PLL_WDT_CONTROL1 to O2_PLL_DLL_WDT_CONTROL1
>
> change in V5:
>  1. split 2 patches into 3 patches
>  2. make dll_adjust_count start from 0  3. fix ret overwritten issue  
> 4. use break instead of goto
>
> change in V4:
>  1. add a bug fix for V3
>
> change in V3:
>  1. add more explanation in dll_recovery and execute_tuning function  
> 2. move dll_adjust_count to O2_host struct  3. fix some coding style 
> error  4. renaming O2_PLL_WDT_CONTROL1 TO O2_PLL_DLL_WDT_CONTROL1
>
> change in V2:
>  1. use usleep_range instead of udelay  2. move dll_adjust_count to 
> sdhci-pci-o2micro.c
>
> chagne in V1:
>  1. add error recovery function to relock DLL with correct phase  2. 
> retuning HS200 after DLL locked
> ---
>  drivers/mmc/host/sdhci-pci-o2micro.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c 
> b/drivers/mmc/host/sdhci-pci-o2micro.c
> index 9dc4548..b3a33d9 100644
> --- a/drivers/mmc/host/sdhci-pci-o2micro.c
> +++ b/drivers/mmc/host/sdhci-pci-o2micro.c
> @@ -51,7 +51,7 @@
>  #define O2_SD_VENDOR_SETTING2  0x1C8
>  #define O2_SD_HW_TUNING_DISABLE        BIT(4)
>
> -#define O2_PLL_WDT_CONTROL1    0x1CC
> +#define O2_PLL_DLL_WDT_CONTROL1        0x1CC
>  #define  O2_PLL_FORCE_ACTIVE   BIT(18)
>  #define  O2_PLL_LOCK_STATUS    BIT(14)
>  #define  O2_PLL_SOFT_RESET     BIT(12)
> @@ -316,23 +316,23 @@ static void sdhci_o2_enable_internal_clock(struct sdhci_host *host)
>         u32 scratch32;
>
>         /* PLL software reset */
> -       scratch32 = sdhci_readl(host, O2_PLL_WDT_CONTROL1);
> +       scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
>         scratch32 |= O2_PLL_SOFT_RESET;
> -       sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
> +       sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
>         udelay(1);
>         scratch32 &= ~(O2_PLL_SOFT_RESET);
> -       sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
> +       sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
>
>         /* PLL force active */
>         scratch32 |= O2_PLL_FORCE_ACTIVE;
> -       sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
> +       sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
>
>         /* Wait max 20 ms */
>         timeout = ktime_add_ms(ktime_get(), 20);
>         while (1) {
>                 bool timedout = ktime_after(ktime_get(), timeout);
>
> -               scratch = sdhci_readw(host, O2_PLL_WDT_CONTROL1);
> +               scratch = sdhci_readw(host, O2_PLL_DLL_WDT_CONTROL1);
>                 if (scratch & O2_PLL_LOCK_STATUS)
>                         break;
>                 if (timedout) {
> @@ -350,9 +350,9 @@ static void sdhci_o2_enable_internal_clock(struct 
> sdhci_host *host)
>
>  out:
>         /* Cancel PLL force active */
> -       scratch32 = sdhci_readl(host, O2_PLL_WDT_CONTROL1);
> +       scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
>         scratch32 &= ~O2_PLL_FORCE_ACTIVE;
> -       sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
> +       sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
>  }
>
>  static int sdhci_o2_get_cd(struct mmc_host *mmc)
> --
> 2.7.4
>