linux-kernel - Re: [PATCH 5/7] ARM: xscale: fix multi-cpu compilation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CACRpkdajapOw+fsEx1fqG3FL-n-WYmOUoGw_HGRHd730h+uv-w@mail.gmail.com>
Date:   Fri, 23 Aug 2019 09:44:19 +0200
From:   Linus Walleij <linus.walleij@...aro.org>
To:     Arnd Bergmann <arnd@...db.de>
Cc:     soc@...nel.org, Russell King <linux@...linux.org.uk>,
        Dan Williams <dan.j.williams@...el.com>,
        Vinod Koul <vkoul@...nel.org>,
        Bartosz Golaszewski <bgolaszewski@...libre.com>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        dmaengine@...r.kernel.org,
        "open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
        linux-i2c <linux-i2c@...r.kernel.org>
Subject: Re: [PATCH 5/7] ARM: xscale: fix multi-cpu compilation

On Fri, Aug 9, 2019 at 6:33 PM Arnd Bergmann <arnd@...db.de> wrote:

> Building a combined ARMv4+XScale kernel produces these
> and other build failures:
>
> /tmp/copypage-xscale-3aa821.s: Assembler messages:
> /tmp/copypage-xscale-3aa821.s:167: Error: selected processor does not support `pld [r7,#0]' in ARM mode
> /tmp/copypage-xscale-3aa821.s:168: Error: selected processor does not support `pld [r7,#32]' in ARM mode
> /tmp/copypage-xscale-3aa821.s:169: Error: selected processor does not support `pld [r1,#0]' in ARM mode
> /tmp/copypage-xscale-3aa821.s:170: Error: selected processor does not support `pld [r1,#32]' in ARM mode
> /tmp/copypage-xscale-3aa821.s:171: Error: selected processor does not support `pld [r7,#64]' in ARM mode
> /tmp/copypage-xscale-3aa821.s:176: Error: selected processor does not support `ldrd r4,r5,[r7],#8' in ARM mode
> /tmp/copypage-xscale-3aa821.s:180: Error: selected processor does not support `strd r4,r5,[r1],#8' in ARM mode

OK we certainly need this.

> Add an explict .arch armv5 in the inline assembly to allow the ARMv5
> specific instructions regardless of the compiler -march= target.

You probably mean...

> +.arch xscale                                   \n\
>         pld     [%0, #0]                        \n\

Explicit .arch xscale rather than .arch armv5.

Yours,
Linus Walleij