linux-kernel - [RESEND PATCH 3/5] bluetooth: hci_bcm: Give more time to come out of reset

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190823103139.17687-4-megous@megous.com>
Date:   Fri, 23 Aug 2019 12:31:37 +0200
From:   megous@...ous.com
To:     Maxime Ripard <mripard@...nel.org>, Chen-Yu Tsai <wens@...e.org>,
        Rob Herring <robh+dt@...nel.org>,
        Marcel Holtmann <marcel@...tmann.org>,
        Johan Hedberg <johan.hedberg@...il.com>
Cc:     Mark Rutland <mark.rutland@....com>,
        "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-bluetooth@...r.kernel.org, Ondrej Jirman <megous@...ous.com>
Subject: [RESEND PATCH 3/5] bluetooth: hci_bcm: Give more time to come out of reset

From: Ondrej Jirman <megous@...ous.com>

Some supported devices need more time to come out of reset (eg.
BCM4345C5 in AP6256).

I don't have/found a datasheet, so the value was arrive at
experimentally with the Oprange Pi 3 board. Without increased delay,
I got intermittent failures during probe. This is a Bluetooth 5.0
device, so maybe that's why it takes longer to initialize than the
others.

Signed-off-by: Ondrej Jirman <megous@...ous.com>
---
 drivers/bluetooth/hci_bcm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 95c312ae94cf..7646636f2d18 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -260,7 +260,7 @@ static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
 	}
 
 	/* wait for device to power on and come out of reset */
-	usleep_range(10000, 20000);
+	usleep_range(100000, 120000);
 
 	dev->res_enabled = powered;
 
-- 
2.23.0