linux-kernel - [PATCH v6 07/11] mfd: cros_ec: Use kzalloc and cros_ec_cmd_xfer

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190823125331.5070-8-enric.balletbo@collabora.com>
Date:   Fri, 23 Aug 2019 14:53:27 +0200
From:   Enric Balletbo i Serra <enric.balletbo@...labora.com>
To:     linux-kernel@...r.kernel.org
Cc:     Jonathan Corbet <corbet@....net>,
        Krzysztof Kozlowski <krzk@...nel.org>,
        Will Deacon <will.deacon@....com>,
        MyungJoo Ham <myungjoo.ham@...sung.com>,
        Chanwoo Choi <cw00.choi@...sung.com>,
        Benson Leung <bleung@...omium.org>,
        Guenter Roeck <groeck@...omium.org>,
        Jonathan Cameron <jic23@...nel.org>,
        Dmitry Torokhov <dmitry.torokhov@...il.com>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Lee Jones <lee.jones@...aro.org>,
        Sebastian Reichel <sre@...nel.org>,
        Thierry Reding <thierry.reding@...il.com>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Liam Girdwood <lgirdwood@...il.com>,
        Mark Brown <broonie@...nel.org>,
        Neil Armstrong <narmstrong@...libre.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Collabora kernel ML <kernel@...labora.com>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Gwendal Grignou <gwendal@...omium.org>
Subject: [PATCH v6 07/11] mfd: cros_ec: Use kzalloc and cros_ec_cmd_xfer_status helper

This patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer() so we can remove some redundant code. It also uses
kzalloc instead of kmalloc so we can remove more redundant code.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@...labora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Reviewed-by: Gwendal Grignou <gwendal@...omium.org>
Tested-by: Gwendal Grignou <gwendal@...omium.org>
Acked-for-MFD-by: Lee Jones <lee.jones@...aro.org>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 drivers/mfd/cros_ec_dev.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
index 091d428f5531..148f39c79f41 100644
--- a/drivers/mfd/cros_ec_dev.c
+++ b/drivers/mfd/cros_ec_dev.c
@@ -30,18 +30,15 @@ static int cros_ec_check_features(struct cros_ec_dev *ec, int feature)
 
 	if (ec->features[0] == -1U && ec->features[1] == -1U) {
 		/* features bitmap not read yet */
-
-		msg = kmalloc(sizeof(*msg) + sizeof(ec->features), GFP_KERNEL);
+		msg = kzalloc(sizeof(*msg) + sizeof(ec->features), GFP_KERNEL);
 		if (!msg)
 			return -ENOMEM;
 
-		msg->version = 0;
 		msg->command = EC_CMD_GET_FEATURES + ec->cmd_offset;
 		msg->insize = sizeof(ec->features);
-		msg->outsize = 0;
 
-		ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
-		if (ret < 0 || msg->result != EC_RES_SUCCESS) {
+		ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
+		if (ret < 0) {
 			dev_warn(ec->dev, "cannot get EC features: %d/%d\n",
 				 ret, msg->result);
 			memset(ec->features, 0, sizeof(ec->features));
@@ -90,8 +87,8 @@ static void cros_ec_sensors_register(struct cros_ec_dev *ec)
 	params = (struct ec_params_motion_sense *)msg->data;
 	params->cmd = MOTIONSENSE_CMD_DUMP;
 
-	ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
-	if (ret < 0 || msg->result != EC_RES_SUCCESS) {
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
+	if (ret < 0) {
 		dev_warn(ec->dev, "cannot get EC sensor information: %d/%d\n",
 			 ret, msg->result);
 		goto error;
@@ -118,8 +115,8 @@ static void cros_ec_sensors_register(struct cros_ec_dev *ec)
 	for (i = 0; i < sensor_num; i++) {
 		params->cmd = MOTIONSENSE_CMD_INFO;
 		params->info.sensor_num = i;
-		ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
-		if (ret < 0 || msg->result != EC_RES_SUCCESS) {
+		ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
+		if (ret < 0) {
 			dev_warn(ec->dev, "no info for EC sensor %d : %d/%d\n",
 				 i, ret, msg->result);
 			continue;
-- 
2.20.1