[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190823135816.GH14582@e119886-lin.cambridge.arm.com>
Date: Fri, 23 Aug 2019 14:58:16 +0100
From: Andrew Murray <andrew.murray@....com>
To: Xiaowei Bao <xiaowei.bao@....com>
Cc: bhelgaas@...gle.com, robh+dt@...nel.org, mark.rutland@....com,
shawnguo@...nel.org, leoyang.li@....com, kishon@...com,
lorenzo.pieralisi@....co, arnd@...db.de,
gregkh@...uxfoundation.org, minghuan.Lian@....com,
mingkai.hu@....com, roy.zang@....com, jingoohan1@...il.com,
gustavo.pimentel@...opsys.com, linux-pci@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linuxppc-dev@...ts.ozlabs.org
Subject: Re: [PATCH v2 07/10] PCI: layerscape: Modify the MSIX to the
doorbell way
On Thu, Aug 22, 2019 at 07:22:39PM +0800, Xiaowei Bao wrote:
> The layerscape platform use the doorbell way to trigger MSIX
> interrupt in EP mode.
>
I have no problems with this patch, however...
Are you able to add to this message a reason for why you are making this
change? Did dw_pcie_ep_raise_msix_irq not work when func_no != 0? Or did
it work yet dw_pcie_ep_raise_msix_irq_doorbell is more efficient?
Thanks,
Andrew Murray
> Signed-off-by: Xiaowei Bao <xiaowei.bao@....com>
> ---
> v2:
> - No change.
>
> drivers/pci/controller/dwc/pci-layerscape-ep.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> index 8461f62..7ca5fe8 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> @@ -74,7 +74,8 @@ static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
> case PCI_EPC_IRQ_MSI:
> return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
> case PCI_EPC_IRQ_MSIX:
> - return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num);
> + return dw_pcie_ep_raise_msix_irq_doorbell(ep, func_no,
> + interrupt_num);
> default:
> dev_err(pci->dev, "UNKNOWN IRQ type\n");
> return -EINVAL;
> --
> 2.9.5
>
Powered by blists - more mailing lists