linux-kernel - Re: [PATCH 1/3] net: Add HW

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <afde1b82-2e4c-5b93-ff31-83cb80a0f7bd@gmail.com>
Date:   Fri, 23 Aug 2019 16:30:40 -0700
From:   Florian Fainelli <f.fainelli@...il.com>
To:     Horatiu Vultur <horatiu.vultur@...rochip.com>,
        Andrew Lunn <andrew@...n.ch>
Cc:     roopa@...ulusnetworks.com, nikolay@...ulusnetworks.com,
        davem@...emloft.net, UNGLinuxDriver@...rochip.com,
        alexandre.belloni@...tlin.com, allan.nielsen@...rochip.com,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        bridge@...ts.linux-foundation.org
Subject: Re: [PATCH 1/3] net: Add HW_BRIDGE offload feature

On 8/23/19 5:39 AM, Horatiu Vultur wrote:
> The 08/22/2019 22:08, Andrew Lunn wrote:
>> External E-Mail
>>
>>
>>> +/* Determin if the SW bridge can be offloaded to HW. Return true if all
>>> + * the interfaces of the bridge have the feature NETIF_F_HW_SWITCHDEV set
>>> + * and have the same netdev_ops.
>>> + */
>>
>> Hi Horatiu
>>
>> Why do you need these restrictions. The HW bridge should be able to
>> learn that a destination MAC address can be reached via the SW
>> bridge. The software bridge can then forward it out the correct
>> interface.
>>
>> Or are you saying your hardware cannot learn from frames which come
>> from the CPU?
>>
>> 	Andrew
>>
> Hi Andrew,
> 
> I do not believe that our HW can learn from frames which comes from the
> CPU, at least not in the way they are injected today. But in case of Ocelot
> (and the next chip we are working on), we have other issues in mixing with
> foreign interfaces which is why we have the check in
> ocelot_netdevice_dev_check.
> 
> More important, as we responded to Nikolay, we properly introduced this
> restriction for the wrong reasons.
> 
> In SW bridge I will remove all these restrictions and only set ports in
> promisc mode only if NETIF_F_HW_BRIDGE is not set.
> Then in the network driver I can see if a foreign interface is added to
> the bridge, and when that happens I can set the port in promisc mode.
> Then the frames will be flooded to the SW bridge which eventually will
> send to the foreign interface.

Is that really necessary? Is not the skb->fwd_offload_mark as well as
the phys_switch_id supposed to tell that information to the bridge already?
-- 
Florian