linux-kernel - [PATCH v2 1/2] mtd: spi-nor: add Global Block Unlock support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190824122700.23558-2-tudor.ambarus@microchip.com>
Date:   Sat, 24 Aug 2019 12:27:12 +0000
From:   <Tudor.Ambarus@...rochip.com>
To:     <boris.brezillon@...labora.com>, <marek.vasut@...il.com>,
        <vigneshr@...com>, <miquel.raynal@...tlin.com>, <richard@....at>,
        <linux-mtd@...ts.infradead.org>, <linux-kernel@...r.kernel.org>
CC:     <Tudor.Ambarus@...rochip.com>
Subject: [PATCH v2 1/2] mtd: spi-nor: add Global Block Unlock support

From: Tudor Ambarus <tudor.ambarus@...rochip.com>

To avoid inadvertent writes during power-up, some flashes are
write-protected by default after a power-on reset cycle.
A Global Block-Protection Unlock command offers a single
command cycle that unlocks the entire memory array. This is
identical with what other nor flashes are doing by clearing
the block protection bits from the status register: disable
the write protection after a power-on reset cycle.

We can't determine this purely by manufacturer type and it's not
autodetectable by anything like SFDP, so make a new flag for it:
UNLOCK_GLOBAL_BLOCK.

Note that the Global Block Unlock command has different names
depending on the manufacturer, but always the same command value:
0x98. Macronix's MX25U12835F names it Gang Block Unlock,
Winbound's W25Q128FV names it Global Block Unlock and
Microchip's SST26VF064B names it Global Block Protection Unlock.

Signed-off-by: Tudor Ambarus <tudor.ambarus@...rochip.com>
---
v2: the check for UNLOCK_GLOBAL_BLOCK should be done the first
thing in spi_nor_disable_block_protection(). We use it for a faster
throughput, a single command cycle that unlocks the entire memory
array. Fix it.

 drivers/mtd/spi-nor/spi-nor.c | 46 ++++++++++++++++++++++++++++++++++++++++++-
 include/linux/mtd/spi-nor.h   |  1 +
 2 files changed, 46 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 1896d36a7d11..c0ba6fe62461 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -196,7 +196,7 @@ struct flash_info {
 	u16		page_size;
 	u16		addr_width;
 
-	u16		flags;
+	u32		flags;
 #define SECT_4K			BIT(0)	/* SPINOR_OP_BE_4K works uniformly */
 #define SPI_NOR_NO_ERASE	BIT(1)	/* No erase command needed */
 #define SST_WRITE		BIT(2)	/* use SST byte programming */
@@ -233,6 +233,7 @@ struct flash_info {
 #define SPI_NOR_SKIP_SFDP	BIT(13)	/* Skip parsing of SFDP tables */
 #define USE_CLSR		BIT(14)	/* use CLSR command */
 #define SPI_NOR_OCTAL_READ	BIT(15)	/* Flash supports Octal Read */
+#define UNLOCK_GLOBAL_BLOCK	BIT(16)	/* Unlock global block protection */
 
 	/* Part specific fixup hooks. */
 	const struct spi_nor_fixups *fixups;
@@ -2031,6 +2032,41 @@ static int spi_nor_spansion_clear_sr_bp(struct spi_nor *nor)
 	return spi_nor_clear_sr_bp(nor);
 }
 
+/**
+ * spi_nor_unlock_global_block_protection() - Unlock the Global Block Protection
+ * @nor:        pointer to a 'struct spi_nor'
+ *
+ * The Global Block-Protection Unlock command offers a single command cycle
+ * that unlocks the entire memory array.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_unlock_global_block_protection(struct spi_nor *nor)
+{
+	int ret;
+
+	write_enable(nor);
+
+	if (nor->spimem) {
+		struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_ULBPR, 1),
+				   SPI_MEM_OP_NO_ADDR,
+				   SPI_MEM_OP_NO_DUMMY,
+				   SPI_MEM_OP_NO_DATA);
+
+		ret = spi_mem_exec_op(nor->spimem, &op);
+	} else {
+		ret = nor->write_reg(nor, SPINOR_OP_ULBPR, NULL, 0);
+	}
+
+	if (ret < 0) {
+		dev_err(nor->dev, "error %d on ULBPR\n", ret);
+		return ret;
+	}
+
+	return spi_nor_wait_till_ready(nor);
+}
+
 /* Used when the "_ext_id" is two bytes at most */
 #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
 		.id = {							\
@@ -4697,6 +4733,14 @@ static int spi_nor_quad_enable(struct spi_nor *nor)
  */
 static int spi_nor_disable_block_protection(struct spi_nor *nor)
 {
+	/*
+	 * If the flash supports the Global Block-Protection Unlock command,
+	 * use it for faster throughput: a single command cycle that unlocks
+	 * the entire memory array.
+	 */
+	if (nor->info->flags & UNLOCK_GLOBAL_BLOCK)
+		return spi_nor_unlock_global_block_protection(nor);
+
 	if (!nor->params.disable_block_protection)
 		return 0;
 
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 4752d08e9a3e..31b99a7743fc 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -66,6 +66,7 @@
 #define SPINOR_OP_CLFSR		0x50	/* Clear flag status register */
 #define SPINOR_OP_RDEAR		0xc8	/* Read Extended Address Register */
 #define SPINOR_OP_WREAR		0xc5	/* Write Extended Address Register */
+#define SPINOR_OP_ULBPR		0x98	/* Global Block Unlock Protection */
 
 /* 4-byte address opcodes - used on Spansion and some Macronix flashes. */
 #define SPINOR_OP_READ_4B	0x13	/* Read data bytes (low frequency) */
-- 
2.9.5