| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190825141848.17346-2-joel@jms.id.au>
Date: Sun, 25 Aug 2019 23:48:47 +0930
From: Joel Stanley <joel@....id.au>
To: Stephen Boyd <sboyd@...nel.org>,
Michael Turquette <mturquette@...libre.com>
Cc: Andrew Jeffery <andrew@...id.au>, Rob Herring <robh+dt@...nel.org>,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-aspeed@...ts.ozlabs.org
Subject: [PATCH v2 1/2] clk: aspeed: Move structures to header
They will be reused by the ast2600 driver.
Signed-off-by: Joel Stanley <joel@....id.au>
---
v2:
include required headers for structures used by clk-aspeed.h
drivers/clk/clk-aspeed.c | 67 ++------------------------------
drivers/clk/clk-aspeed.h | 82 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 85 insertions(+), 64 deletions(-)
create mode 100644 drivers/clk/clk-aspeed.h
diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c
index 898291501f45..abf06fb6453e 100644
--- a/drivers/clk/clk-aspeed.c
+++ b/drivers/clk/clk-aspeed.c
@@ -1,19 +1,19 @@
// SPDX-License-Identifier: GPL-2.0+
+// Copyright IBM Corp
#define pr_fmt(fmt) "clk-aspeed: " fmt
-#include <linux/clk-provider.h>
#include <linux/mfd/syscon.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
-#include <linux/reset-controller.h>
#include <linux/slab.h>
-#include <linux/spinlock.h>
#include <dt-bindings/clock/aspeed-clock.h>
+#include "clk-aspeed.h"
+
#define ASPEED_NUM_CLKS 36
#define ASPEED_RESET2_OFFSET 32
@@ -42,48 +42,6 @@ static struct clk_hw_onecell_data *aspeed_clk_data;
static void __iomem *scu_base;
-/**
- * struct aspeed_gate_data - Aspeed gated clocks
- * @clock_idx: bit used to gate this clock in the clock register
- * @reset_idx: bit used to reset this IP in the reset register. -1 if no
- * reset is required when enabling the clock
- * @name: the clock name
- * @parent_name: the name of the parent clock
- * @flags: standard clock framework flags
- */
-struct aspeed_gate_data {
- u8 clock_idx;
- s8 reset_idx;
- const char *name;
- const char *parent_name;
- unsigned long flags;
-};
-
-/**
- * struct aspeed_clk_gate - Aspeed specific clk_gate structure
- * @hw: handle between common and hardware-specific interfaces
- * @reg: register controlling gate
- * @clock_idx: bit used to gate this clock in the clock register
- * @reset_idx: bit used to reset this IP in the reset register. -1 if no
- * reset is required when enabling the clock
- * @flags: hardware-specific flags
- * @lock: register lock
- *
- * Some of the clocks in the Aspeed SoC must be put in reset before enabling.
- * This modified version of clk_gate allows an optional reset bit to be
- * specified.
- */
-struct aspeed_clk_gate {
- struct clk_hw hw;
- struct regmap *map;
- u8 clock_idx;
- s8 reset_idx;
- u8 flags;
- spinlock_t *lock;
-};
-
-#define to_aspeed_clk_gate(_hw) container_of(_hw, struct aspeed_clk_gate, hw)
-
/* TODO: ask Aspeed about the actual parent data */
static const struct aspeed_gate_data aspeed_gates[] = {
/* clk rst name parent flags */
@@ -208,13 +166,6 @@ static struct clk_hw *aspeed_ast2500_calc_pll(const char *name, u32 val)
mult, div);
}
-struct aspeed_clk_soc_data {
- const struct clk_div_table *div_table;
- const struct clk_div_table *eclk_div_table;
- const struct clk_div_table *mac_div_table;
- struct clk_hw *(*calc_pll)(const char *name, u32 val);
-};
-
static const struct aspeed_clk_soc_data ast2500_data = {
.div_table = ast2500_div_table,
.eclk_div_table = ast2500_eclk_div_table,
@@ -315,18 +266,6 @@ static const struct clk_ops aspeed_clk_gate_ops = {
.is_enabled = aspeed_clk_is_enabled,
};
-/**
- * struct aspeed_reset - Aspeed reset controller
- * @map: regmap to access the containing system controller
- * @rcdev: reset controller device
- */
-struct aspeed_reset {
- struct regmap *map;
- struct reset_controller_dev rcdev;
-};
-
-#define to_aspeed_reset(p) container_of((p), struct aspeed_reset, rcdev)
-
static const u8 aspeed_resets[] = {
/* SCU04 resets */
[ASPEED_RESET_XDMA] = 25,
diff --git a/drivers/clk/clk-aspeed.h b/drivers/clk/clk-aspeed.h
new file mode 100644
index 000000000000..5296b15b1c88
--- /dev/null
+++ b/drivers/clk/clk-aspeed.h
@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Structures used by ASPEED clock drivers
+ *
+ * Copyright 2019 IBM Corp.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/reset-controller.h>
+#include <linux/spinlock.h>
+
+struct clk_div_table;
+struct regmap;
+
+/**
+ * struct aspeed_gate_data - Aspeed gated clocks
+ * @clock_idx: bit used to gate this clock in the clock register
+ * @reset_idx: bit used to reset this IP in the reset register. -1 if no
+ * reset is required when enabling the clock
+ * @name: the clock name
+ * @parent_name: the name of the parent clock
+ * @flags: standard clock framework flags
+ */
+struct aspeed_gate_data {
+ u8 clock_idx;
+ s8 reset_idx;
+ const char *name;
+ const char *parent_name;
+ unsigned long flags;
+};
+
+/**
+ * struct aspeed_clk_gate - Aspeed specific clk_gate structure
+ * @hw: handle between common and hardware-specific interfaces
+ * @reg: register controlling gate
+ * @clock_idx: bit used to gate this clock in the clock register
+ * @reset_idx: bit used to reset this IP in the reset register. -1 if no
+ * reset is required when enabling the clock
+ * @flags: hardware-specific flags
+ * @lock: register lock
+ *
+ * Some of the clocks in the Aspeed SoC must be put in reset before enabling.
+ * This modified version of clk_gate allows an optional reset bit to be
+ * specified.
+ */
+struct aspeed_clk_gate {
+ struct clk_hw hw;
+ struct regmap *map;
+ u8 clock_idx;
+ s8 reset_idx;
+ u8 flags;
+ spinlock_t *lock;
+};
+
+#define to_aspeed_clk_gate(_hw) container_of(_hw, struct aspeed_clk_gate, hw)
+
+/**
+ * struct aspeed_reset - Aspeed reset controller
+ * @map: regmap to access the containing system controller
+ * @rcdev: reset controller device
+ */
+struct aspeed_reset {
+ struct regmap *map;
+ struct reset_controller_dev rcdev;
+};
+
+#define to_aspeed_reset(p) container_of((p), struct aspeed_reset, rcdev)
+
+/**
+ * struct aspeed_clk_soc_data - Aspeed SoC specific divisor information
+ * @div_table: Common divider lookup table
+ * @eclk_div_table: Divider lookup table for ECLK
+ * @mac_div_table: Divider lookup table for MAC (Ethernet) clocks
+ * @calc_pll: Callback to maculate common PLL settings
+ */
+struct aspeed_clk_soc_data {
+ const struct clk_div_table *div_table;
+ const struct clk_div_table *eclk_div_table;
+ const struct clk_div_table *mac_div_table;
+ struct clk_hw *(*calc_pll)(const char *name, u32 val);
+};
--
2.23.0.rc1
Powered by blists - more mailing lists