[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20190825182653.25a685d4@archlinux>
Date: Sun, 25 Aug 2019 18:26:53 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Beniamin Bia <beniamin.bia@...log.com>
Cc: <lars@...afoo.de>, <Michael.Hennerich@...log.com>,
<knaack.h@....de>, <pmeerw@...erw.net>,
<gregkh@...uxfoundation.org>, <linux-iio@...r.kernel.org>,
<devel@...verdev.osuosl.org>, <linux-kernel@...r.kernel.org>,
<mark.rutland@....com>, <robh+dt@...nel.org>,
<devicetree@...r.kernel.org>, <paulmck@...ux.ibm.com>,
<mchehab+samsung@...nel.org>, <linus.walleij@...aro.org>,
<nicolas.ferre@...rochip.com>, <biabeniamin@...look.com>
Subject: Re: [PATCH v3 4/4] dt-bindings: iio: adc: Add AD7606B ADC
documentation
On Wed, 21 Aug 2019 17:16:56 +0300
Beniamin Bia <beniamin.bia@...log.com> wrote:
> Documentation for AD7606B Analog to Digital Converter and software
> mode was added.
>
> Signed-off-by: Beniamin Bia <beniamin.bia@...log.com>
Tweaked as per Peter's comment and added Rob's Reviewed-by from v2
Seems everyone decided to review this one just as you were posting
the new version ;)
Jonathan
> ---
> Changes in v3:
> -nothing changed
>
> Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
> index 509dbe9c84d2..2afe31747a70 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
> @@ -13,6 +13,7 @@ maintainers:
> description: |
> Analog Devices AD7606 Simultaneous Sampling ADC
> https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606_7606-6_7606-4.pdf
> + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7606B.pdf
> https://www.analog.com/media/en/technical-documentation/data-sheets/AD7616.pdf
>
> properties:
> @@ -22,6 +23,7 @@ properties:
> - adi,ad7606-8
> - adi,ad7606-6
> - adi,ad7606-4
> + - adi,ad7606b
> - adi,ad7616
>
> reg:
> @@ -87,7 +89,7 @@ properties:
>
> adi,sw-mode:
> description:
> - Software mode of operation, so far available only for ad7616.
> + Software mode of operation, so far available only for ad7616 and ad7606B.
> It is enabled when all three oversampling mode pins are connected to
> high level. The device is configured by the corresponding registers. If the
> adi,oversampling-ratio-gpios property is defined, then the driver will set the
Powered by blists - more mailing lists