lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190825182557.23260-1-kw@linux.com>
Date:   Sun, 25 Aug 2019 20:25:57 +0200
From:   Krzysztof Wilczynski <kw@...ux.com>
To:     Bjorn Helgaas <helgaas@...nel.org>
Cc:     Thomas Gleixner <tglx@...utronix.de>,
        Ingo Molnar <mingo@...hat.com>, Borislav Petkov <bp@...en8.de>,
        "H. Peter Anvin" <hpa@...or.com>, x86@...nel.org,
        linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] x86/PCI: Add missing log facility and move to use pr_ macros in pcbios.c

Make the log facility used to print warnings to be KERN_WARNING
explicitly, rather than rely on the current (or default) value
of the MESSAGE_LOGLEVEL_DEFAULT set in Kconfig.  This will make
all the warnings in the arch/x86/pci/pcbios.c to be printed
consistently at the same log facility.

Replace printk(KERN_<level> ...) with corresponding pr_ macros,
while adding the missing log facility.

Signed-off-by: Krzysztof Wilczynski <kw@...ux.com>
---
 arch/x86/pci/pcbios.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index 9c97d814125e..0c3673f50bce 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -47,7 +47,7 @@ static inline void set_bios_x(void)
 	pcibios_enabled = 1;
 	set_memory_x(PAGE_OFFSET + BIOS_BEGIN, (BIOS_END - BIOS_BEGIN) >> PAGE_SHIFT);
 	if (__supported_pte_mask & _PAGE_NX)
-		printk(KERN_INFO "PCI: PCI BIOS area is rw and x. Use pci=nobios if you want it NX.\n");
+		pr_info("PCI: PCI BIOS area is rw and x. Use pci=nobios if you want it NX.\n");
 }
 
 /*
@@ -111,10 +111,10 @@ static unsigned long __init bios32_service(unsigned long service)
 		case 0:
 			return address + entry;
 		case 0x80:	/* Not present */
-			printk(KERN_WARNING "bios32_service(0x%lx): not present\n", service);
+			pr_warn("bios32_service(0x%lx): not present\n", service);
 			return 0;
 		default: /* Shouldn't happen */
-			printk(KERN_WARNING "bios32_service(0x%lx): returned 0x%x -- BIOS bug!\n",
+			pr_warn("bios32_service(0x%lx): returned 0x%x -- BIOS bug!\n",
 				service, return_code);
 			return 0;
 	}
@@ -163,11 +163,11 @@ static int __init check_pcibios(void)
 		DBG("PCI: BIOS probe returned s=%02x hw=%02x ver=%02x.%02x l=%02x\n",
 			status, hw_mech, major_ver, minor_ver, pcibios_last_bus);
 		if (status || signature != PCI_SIGNATURE) {
-			printk (KERN_ERR "PCI: BIOS BUG #%x[%08x] found\n",
+			pr_err("PCI: BIOS BUG #%x[%08x] found\n",
 				status, signature);
 			return 0;
 		}
-		printk(KERN_INFO "PCI: PCI BIOS revision %x.%02x entry at 0x%lx, last bus=%d\n",
+		pr_info("PCI: PCI BIOS revision %x.%02x entry at 0x%lx, last bus=%d\n",
 			major_ver, minor_ver, pcibios_entry, pcibios_last_bus);
 #ifdef CONFIG_PCI_DIRECT
 		if (!(hw_mech & PCIBIOS_HW_TYPE1))
@@ -316,13 +316,13 @@ static const struct pci_raw_ops *__init pci_find_bios(void)
 		if (sum != 0)
 			continue;
 		if (check->fields.revision != 0) {
-			printk("PCI: unsupported BIOS32 revision %d at 0x%p\n",
+			pr_warn("PCI: unsupported BIOS32 revision %d at 0x%p\n",
 				check->fields.revision, check);
 			continue;
 		}
 		DBG("PCI: BIOS32 Service Directory structure at 0x%p\n", check);
 		if (check->fields.entry >= 0x100000) {
-			printk("PCI: BIOS32 entry (0x%p) in high memory, "
+			pr_warn("PCI: BIOS32 entry (0x%p) in high memory, "
 					"cannot use.\n", check);
 			return NULL;
 		} else {
@@ -386,7 +386,7 @@ struct irq_routing_table * pcibios_get_irq_routing_table(void)
 		: "memory");
 	DBG("OK  ret=%d, size=%d, map=%x\n", ret, opt.size, map);
 	if (ret & 0xff00)
-		printk(KERN_ERR "PCI: Error %02x when fetching IRQ routing table.\n", (ret >> 8) & 0xff);
+		pr_err("PCI: Error %02x when fetching IRQ routing table.\n", (ret >> 8) & 0xff);
 	else if (opt.size) {
 		rt = kmalloc(sizeof(struct irq_routing_table) + opt.size, GFP_KERNEL);
 		if (rt) {
@@ -394,7 +394,7 @@ struct irq_routing_table * pcibios_get_irq_routing_table(void)
 			rt->size = opt.size + sizeof(struct irq_routing_table);
 			rt->exclusive_irqs = map;
 			memcpy(rt->slots, (void *) page, opt.size);
-			printk(KERN_INFO "PCI: Using BIOS Interrupt Routing Table\n");
+			pr_info("PCI: Using BIOS Interrupt Routing Table\n");
 		}
 	}
 	free_page(page);
-- 
2.22.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ