linux-kernel - Re: [PATCH] ARM: dts: vf610-zii-scu4-aib: Use generic names for DT nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20190825071839.GC5292@X250.getinternet.no>
Date:   Sun, 25 Aug 2019 09:18:40 +0200
From:   Shawn Guo <shawnguo@...nel.org>
To:     Andrey Smirnov <andrew.smirnov@...il.com>
Cc:     linux-arm-kernel@...ts.infradead.org,
        Chris Healy <cphealy@...il.com>,
        Cory Tusar <cory.tusar@....aero>,
        Fabio Estevam <festevam@...il.com>,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ARM: dts: vf610-zii-scu4-aib: Use generic names for DT
 nodes

On Fri, Aug 23, 2019 at 05:27:47PM -0700, Andrey Smirnov wrote:
> The devicetree specification recommends using generic node names.
> 
> Some ZII dts files already follow such recommendation, but some don't,
> so use generic node names for consistency among the ZII dts files.
> 
> Signed-off-by: Andrey Smirnov <andrew.smirnov@...il.com>
> Cc: Shawn Guo <shawnguo@...nel.org>
> Cc: Chris Healy <cphealy@...il.com>
> Cc: Cory Tusar <cory.tusar@....aero>
> Cc: Fabio Estevam <festevam@...il.com>
> Cc: linux-arm-kernel@...ts.infradead.org
> Cc: linux-kernel@...r.kernel.org

It doesn't apply to my branch.

Shawn

> ---
>  arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 24 ++++++++++++------------
>  1 file changed, 12 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
> index 45a978defbdc..6edd682dbd29 100644
> --- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
> +++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
> @@ -417,7 +417,7 @@
>  	pinctrl-0 = <&pinctrl_dspi1>;
>  	status = "okay";
>  
> -	spi-flash@0 {
> +	flash@0 {
>  		#address-cells = <1>;
>  		#size-cells = <1>;
>  		compatible = "jedec,spi-nor";
> @@ -430,7 +430,7 @@
>  		};
>  	};
>  
> -	spi-flash@1 {
> +	flash@1 {
>  		#address-cells = <1>;
>  		#size-cells = <1>;
>  		compatible = "jedec,spi-nor";
> @@ -519,7 +519,7 @@
>  		#gpio-cells = <2>;
>  	};
>  
> -	lm75@48 {
> +	temp-sensor@48 {
>  		compatible = "national,lm75";
>  		reg = <0x48>;
>  	};
> @@ -534,7 +534,7 @@
>  		reg = <0x52>;
>  	};
>  
> -	ds1682@6b {
> +	elapsed-time-recorder@6b {
>  		compatible = "dallas,ds1682";
>  		reg = <0x6b>;
>  	};
> @@ -551,7 +551,7 @@
>  		reg = <0x38>;
>  	};
>  
> -	adt7411@4a {
> +	adc@4a {
>  		compatible = "adi,adt7411";
>  		reg = <0x4a>;
>  	};
> @@ -563,7 +563,7 @@
>  	pinctrl-0 = <&pinctrl_i2c2>;
>  	status = "okay";
>  
> -	gpio9: sx1503q@20 {
> +	gpio9: io-expander@20 {
>  		compatible = "semtech,sx1503q";
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&pinctrl_sx1503_20>;
> @@ -574,12 +574,12 @@
>  		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
>  	};
>  
> -	lm75@4e {
> +	temp-sensor@4e {
>  		compatible = "national,lm75";
>  		reg = <0x4e>;
>  	};
>  
> -	lm75@4f {
> +	temp-sensor@4f {
>  		compatible = "national,lm75";
>  		reg = <0x4f>;
>  	};
> @@ -591,17 +591,17 @@
>  		reg = <0x23>;
>  	};
>  
> -	adt7411@4a {
> +	adc@4a {
>  		compatible = "adi,adt7411";
>  		reg = <0x4a>;
>  	};
>  
> -	at24c08@54 {
> +	eeprom@54 {
>  		compatible = "atmel,24c08";
>  		reg = <0x54>;
>  	};
>  
> -	tca9548@70 {
> +	i2c-mux@70 {
>  		compatible = "nxp,pca9548";
>  		pinctrl-names = "default";
>  		#address-cells = <1>;
> @@ -639,7 +639,7 @@
>  		};
>  	};
>  
> -	tca9548@71 {
> +	i2c-mux@71 {
>  		compatible = "nxp,pca9548";
>  		pinctrl-names = "default";
>  		reg = <0x71>;
> -- 
> 2.21.0
>