Message-ID: <20190826115833.14913-1-tudor.ambarus@microchip.com>
Date:   Mon, 26 Aug 2019 11:58:41 +0000
From:   <Tudor.Ambarus@...rochip.com>
To:     <boris.brezillon@...labora.com>, <marek.vasut@...il.com>,
        <vigneshr@...com>, <miquel.raynal@...tlin.com>, <richard@....at>,
        <linux-mtd@...ts.infradead.org>, <linux-kernel@...r.kernel.org>
CC:     <Tudor.Ambarus@...rochip.com>
Subject: [PATCH v3 00/20] mtd: spi-nor: move manuf out of the core

From: Tudor Ambarus <tudor.ambarus@...rochip.com>

v3:
- Drop patches:
  "mtd: spi-nor: Move clear_sr_bp() to 'struct spi_nor_flash_parameter'"
  "mtd: spi-nor: Rework the disabling of block write protection"
and replace them with the RFC patch:
  "mtd: spi-nor: Rework the disabling of block write protection"
- rename spi_nor_legacy_init_params() to spi_nor_info_init_params()
- rebase patches and send them all in a single patch set.

v2:
- addressed all the comments
- all flash parameters and settings are now set in 'struct
  spi_nor_flash_parameter', for a clearer separation between the SPI NOR
  layer and the flash params.

The scope of the "mtd: spi-nor: move manuf out of the core" batches,
is to move all manufacturer specific code out of the spi-nor core.

In the quest of removing the manufacturer specific code from the spi-nor
core, we want to impose a timeline/priority on how the flash parameters
are updated. As of now. the flash parameters initialization logic is as
following:

    a/ default flash parameters init in spi_nor_init_params()
    b/ manufacturer specific flash parameters updates, split across entire
       spi-nor core code
    c/ flash parameters updates based on SFDP tables
    d/ post BFPT flash parameter updates

With the "mtd: spi-nor: move manuf out of the core" batches, we want to
impose the following sequence of calls:

    1/ spi-nor core legacy flash parameters init:
            spi_nor_default_init_params()

    2/ MFR-based manufacturer flash parameters init:
            nor->manufacturer->fixups->default_init()

    3/ specific flash_info tweeks done when decisions can not be done just
       on MFR:
            nor->info->fixups->default_init()

    4/ SFDP tables flash parameters init - SFDP knows better:
            spi_nor_sfdp_init_params()

    5/ post SFDP tables flash parameters updates - in case manufacturers
       get the serial flash tables wrong or incomplete.
            nor->info->fixups->post_sfdp()
       The later can be extended to nor->manufacturer->fixups->post_sfdp()
       if needed.

Setting of flash parameters will no longer be spread interleaved across
the spi-nor core, there will be a clear separation on who and when will
update the flash parameters.

Tested on sst26vf064b with atmel-quadspi SPIMEM driver.

Boris Brezillon (7):
  mtd: spi-nor: Add a default_init() fixup hook for gd25q256
  mtd: spi-nor: Create a ->set_4byte() method
  mtd: spi-nor: Rework the SPI NOR lock/unlock logic
  mtd: spi-nor: Add post_sfdp() hook to tweak flash config
  mtd: spi-nor: Add spansion_post_sfdp_fixups()
  mtd: spi-nor: Add a ->convert_addr() method
  mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag

Tudor Ambarus (13):
  mtd: spi-nor: Regroup flash parameter and settings
  mtd: spi-nor: Use nor->params
  mtd: spi-nor: Drop quad_enable() from 'struct spi-nor'
  mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter'
  mtd: spi-nor: Add default_init() hook to tweak flash parameters
  mtd: spi_nor: Move manufacturer quad_enable() in ->default_init()
  mtd: spi-nor: Split spi_nor_init_params()
  mtd: spi_nor: Add a ->setup() method
  mtd: spi-nor: Add s3an_post_sfdp_fixups()
  mtd: spi-nor: Bring flash params init together
  mtd: spi_nor: Introduce spi_nor_set_addr_width()
  mtd: spi-nor: Introduce spi_nor_get_flash_info()
  mtd: spi-nor: Rework the disabling of block write protection

 drivers/mtd/spi-nor/spi-nor.c | 1304 +++++++++++++++++++++++------------------
 include/linux/mtd/spi-nor.h   |  298 +++++++---
 2 files changed, 927 insertions(+), 675 deletions(-)

-- 
2.9.5

Powered by blists - more mailing lists