linux-kernel - [PATCH 5/5] mmc: sdhci-sprd: clear the UHS-I modes read from registers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190826031830.30931-6-zhang.lyra@gmail.com>
Date:   Mon, 26 Aug 2019 11:18:30 +0800
From:   Chunyan Zhang <zhang.lyra@...il.com>
To:     Ulf Hansson <ulf.hansson@...aro.org>,
        Adrian Hunter <adrian.hunter@...el.com>,
        Orson Zhai <orsonzhai@...il.com>,
        Baolin Wang <baolin.wang@...aro.org>
Cc:     linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
        Chunyan Zhang <zhang.lyra@...il.com>
Subject: [PATCH 5/5] mmc: sdhci-sprd: clear the UHS-I modes read from registers

From: Chunyan Zhang <chunyan.zhang@...soc.com>

sprd's sd host controller supports SDR50/SDR104/DDR50 though, the UHS-I
mode used by the specific card can be selected via devicetree only.

Signed-off-by: Chunyan Zhang <chunyan.zhang@...soc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@...il.com>
---
 drivers/mmc/host/sdhci-sprd.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
index 1fecf055682c..d3c3e95676f0 100644
--- a/drivers/mmc/host/sdhci-sprd.c
+++ b/drivers/mmc/host/sdhci-sprd.c
@@ -509,7 +509,8 @@ static void sdhci_sprd_phy_param_parse(struct sdhci_sprd_host *sprd_host,
 
 static const struct sdhci_pltfm_data sdhci_sprd_pdata = {
 	.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
-		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK,
+		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
+		  SDHCI_QUIRK_MISSING_CAPS,
 	.quirks2 = SDHCI_QUIRK2_BROKEN_HS200 |
 		   SDHCI_QUIRK2_USE_32BIT_BLK_CNT |
 		   SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
@@ -614,6 +615,16 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
 
 	sdhci_enable_v4_mode(host);
 
+	/*
+	 * Supply the existing CAPS, but clear the UHS-I modes. This
+	 * will allow these modes to be specified only by device
+	 * tree properties through mmc_of_parse().
+	 */
+	host->caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+	host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
+	host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 |
+			 SDHCI_SUPPORT_DDR50);
+
 	ret = sdhci_setup_host(host);
 	if (ret)
 		goto pm_runtime_disable;
-- 
2.20.1