linux-kernel - [PATCH 03/12] ARM: dts: imx7d: cl-som-imx7: fix i2c2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190826153800.35400-3-git@andred.net>
Date:   Mon, 26 Aug 2019 16:37:51 +0100
From:   André Draszik <git@...red.net>
To:     linux-kernel@...r.kernel.org
Cc:     André Draszik <git@...red.net>,
        Ilya Ledvich <ilya@...pulab.co.il>,
        Igor Grinberg <grinberg@...pulab.co.il>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>,
        NXP Linux Team <linux-imx@....com>,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: [PATCH 03/12] ARM: dts: imx7d: cl-som-imx7: fix i2c2

I2C2 is configured incorrectly at the moment:
* update i2c2 to actually work (fix incorrect pinctrl assignments)
* add the i2c2 bus recovery information [1]

[1] Note that scl is being marked as GPIO_OPEN_DRAIN even
though the i.MX pinctrl driver does not support enabling
open drain directly - it is enabled by the fixed pinmux
entry.
So while this flag has no effect in practice, it needs
to be there purely so as to fix the following warning
from gpiolib:
    gpio-6 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
as that is the mode requested by i2c-imx.c

Signed-off-by: André Draszik <git@...red.net>
Cc: Ilya Ledvich <ilya@...pulab.co.il>
Cc: Igor Grinberg <grinberg@...pulab.co.il>
Cc: Rob Herring <robh+dt@...nel.org>
Cc: Mark Rutland <mark.rutland@....com>
Cc: Shawn Guo <shawnguo@...nel.org>
Cc: Sascha Hauer <s.hauer@...gutronix.de>
Cc: Pengutronix Kernel Team <kernel@...gutronix.de>
Cc: Fabio Estevam <festevam@...il.com>
Cc: NXP Linux Team <linux-imx@....com>
Cc: devicetree@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org
---
 arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 26 +++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
index e0432a3aa36f..ec82f4738c4f 100644
--- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -72,8 +72,11 @@
 };
 
 &i2c2 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_recovery>;
+	sda-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	pmic: pmic@8 {
@@ -236,13 +239,6 @@
 		>;
 	};
 
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
-			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
-		>;
-	};
-
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
@@ -273,4 +269,18 @@
 			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x34
 		>;
 	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO07__I2C2_SDA	0x4000000f
+			MX7D_PAD_LPSR_GPIO1_IO06__I2C2_SCL	0x4000000f
+		>;
+	};
+
+	pinctrl_i2c2_recovery: i2c2recoverygrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x4000007f
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x4000007f
+		>;
+	};
 };
-- 
2.23.0.rc1