linux-kernel - [PATCH 2/2] remoteproc: stm32: wakeup the system by wdg irq

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1566833923-16718-3-git-send-email-fabien.dessenne@st.com>
Date:   Mon, 26 Aug 2019 17:38:43 +0200
From:   Fabien Dessenne <fabien.dessenne@...com>
To:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Alexandre Torgue <alexandre.torgue@...com>,
        Ohad Ben-Cohen <ohad@...ery.com>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        <devicetree@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <linux-remoteproc@...r.kernel.org>
CC:     Fabien Dessenne <fabien.dessenne@...com>,
        Loic Pallardy <loic.pallardy@...com>,
        Arnaud Pouliquen <arnaud.pouliquen@...com>
Subject: [PATCH 2/2] remoteproc: stm32: wakeup the system by wdg irq

If the device node defines the 'wakeup-source' property, use the WDG
exti IRQ as a wakeup source of the system.

Signed-off-by: Fabien Dessenne <fabien.dessenne@...com>
---
 drivers/remoteproc/stm32_rproc.c | 47 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
index 2cf4b29..7ed8895 100644
--- a/drivers/remoteproc/stm32_rproc.c
+++ b/drivers/remoteproc/stm32_rproc.c
@@ -15,6 +15,7 @@
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/of_reserved_mem.h>
+#include <linux/pm_wakeirq.h>
 #include <linux/regmap.h>
 #include <linux/remoteproc.h>
 #include <linux/reset.h>
@@ -65,6 +66,7 @@ struct stm32_rproc {
 	struct reset_control *rst;
 	struct stm32_syscon hold_boot;
 	struct stm32_syscon pdds;
+	int wdg_irq;
 	u32 nb_rmems;
 	struct stm32_rproc_mem *rmems;
 	struct stm32_mbox mb[MBOX_NB_MBX];
@@ -528,6 +530,13 @@ static int stm32_rproc_parse_dt(struct platform_device *pdev)
 			return err;
 		}
 
+		ddata->wdg_irq = irq;
+
+		if (of_property_read_bool(np, "wakeup-source")) {
+			device_init_wakeup(dev, true);
+			dev_pm_set_wake_irq(dev, irq);
+		}
+
 		dev_info(dev, "wdg irq registered\n");
 	}
 
@@ -607,6 +616,10 @@ static int stm32_rproc_probe(struct platform_device *pdev)
 free_mb:
 	stm32_rproc_free_mbox(rproc);
 free_rproc:
+	if (device_may_wakeup(dev)) {
+		dev_pm_clear_wake_irq(dev);
+		device_init_wakeup(dev, false);
+	}
 	rproc_free(rproc);
 	return ret;
 }
@@ -614,22 +627,56 @@ static int stm32_rproc_probe(struct platform_device *pdev)
 static int stm32_rproc_remove(struct platform_device *pdev)
 {
 	struct rproc *rproc = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
 
 	if (atomic_read(&rproc->power) > 0)
 		rproc_shutdown(rproc);
 
 	rproc_del(rproc);
 	stm32_rproc_free_mbox(rproc);
+
+	if (device_may_wakeup(dev)) {
+		dev_pm_clear_wake_irq(dev);
+		device_init_wakeup(dev, false);
+	}
 	rproc_free(rproc);
 
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int stm32_rproc_suspend(struct device *dev)
+{
+	struct rproc *rproc = dev_get_drvdata(dev);
+	struct stm32_rproc *ddata = rproc->priv;
+
+	if (device_may_wakeup(dev))
+		return enable_irq_wake(ddata->wdg_irq);
+
+	return 0;
+}
+
+static int stm32_rproc_resume(struct device *dev)
+{
+	struct rproc *rproc = dev_get_drvdata(dev);
+	struct stm32_rproc *ddata = rproc->priv;
+
+	if (device_may_wakeup(dev))
+		return disable_irq_wake(ddata->wdg_irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(stm32_rproc_pm_ops,
+			 stm32_rproc_suspend, stm32_rproc_resume);
+
 static struct platform_driver stm32_rproc_driver = {
 	.probe = stm32_rproc_probe,
 	.remove = stm32_rproc_remove,
 	.driver = {
 		.name = "stm32-rproc",
+		.pm = &stm32_rproc_pm_ops,
 		.of_match_table = of_match_ptr(stm32_rproc_match),
 	},
 };
-- 
2.7.4