| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190827131806.6816-7-philippe.schenker@toradex.com>
Date: Tue, 27 Aug 2019 13:18:28 +0000
From: Philippe Schenker <philippe.schenker@...adex.com>
To: Marcel Ziswiler <marcel.ziswiler@...adex.com>,
Max Krummenacher <max.krummenacher@...adex.com>,
"stefan @ agner . ch" <stefan@...er.ch>,
"devicetree @ vger . kernel . org" <devicetree@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Michal Vokáč <michal.vokac@...ft.com>,
Fabio Estevam <festevam@...il.com>
CC: Philippe Schenker <philippe.schenker@...adex.com>,
Oleksandr Suvorov <oleksandr.suvorov@...adex.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
NXP Linux Team <linux-imx@....com>,
Sascha Hauer <s.hauer@...gutronix.de>
Subject: [PATCH v5 06/13] ARM: dts: imx6-apalis: Add touchscreens used on
Toradex eval boards
This commit adds the touchscreen from Toradex so one can enable it.
It is disabled by default because the pins are also used for PWM<B>,
PWM<C>, aka pwm2, pwm3 which is the standard use for colibri boards.
Signed-off-by: Philippe Schenker <philippe.schenker@...adex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@...adex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@...adex.com>
---
Changes in v5:
- Adjusted commit message
- Switched to consistent naming: pinctrl_xxx: xxxgrp
- Added Olek's Reviewed-by
Changes in v4:
- Add Marcel Ziswiler's Ack
Changes in v3:
- Fix commit title to "...imx6-apalis:..."
Changes in v2:
- Deleted touchrevolution downstream stuff
- Use generic node name
- Put a better comment in there
arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 31 +++++++++++++++++++
arch/arm/boot/dts/imx6q-apalis-eval.dts | 13 ++++++++
arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts | 13 ++++++++
arch/arm/boot/dts/imx6q-apalis-ixora.dts | 13 ++++++++
4 files changed, 70 insertions(+)
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index 9a5d6c94cca4..5e9d844d78f2 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -168,6 +168,21 @@
&i2c3 {
status = "okay";
+ /*
+ * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
+ * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
+ */
+ touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcap_1>;
+ reg = <0x4a>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */
+ reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; /* SODIMM 30 */
+ status = "disabled";
+ };
+
/* M41T0M6 real time clock on carrier board */
rtc_i2c: rtc@68 {
compatible = "st,m41t0";
@@ -175,6 +190,22 @@
};
};
+&iomuxc {
+ pinctrl_pcap_1: pcap1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* SODIMM 28 */
+ MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* SODIMM 30 */
+ >;
+ };
+
+ pinctrl_mxt_ts: mxttsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x130b0 /* SODIMM 107 */
+ MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x130b0 /* SODIMM 106 */
+ >;
+ };
+};
+
&ipu1_di0_disp0 {
remote-endpoint = <&lcd_display_in>;
};
diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts
index 0edd3043d9c1..4665e15b196d 100644
--- a/arch/arm/boot/dts/imx6q-apalis-eval.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts
@@ -167,6 +167,19 @@
&i2c1 {
status = "okay";
+ /*
+ * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
+ * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
+ */
+ touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* SODIMM 13 */
+ status = "disabled";
+ };
+
pcie-switch@58 {
compatible = "plx,pex8605";
reg = <0x58>;
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
index b94bb687be6b..a3fa04a97d81 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
@@ -172,6 +172,19 @@
&i2c1 {
status = "okay";
+ /*
+ * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
+ * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
+ */
+ touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* SODIMM 13 */
+ status = "disabled";
+ };
+
/* M41T0M6 real time clock on carrier board */
rtc_i2c: rtc@68 {
compatible = "st,m41t0";
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
index 302fd6adc8a7..5ba49d0f4880 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -171,6 +171,19 @@
&i2c1 {
status = "okay";
+ /*
+ * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
+ * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
+ */
+ touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* SODIMM 13 */
+ status = "disabled";
+ };
+
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
--
2.23.0
Powered by blists - more mailing lists