linux-kernel - [PATCHv6] drivers/amba: add reset control to amba bus probe

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190827141153.20254-1-dinguyen@kernel.org>
Date:   Tue, 27 Aug 2019 09:11:53 -0500
From:   Dinh Nguyen <dinguyen@...nel.org>
To:     linux-kernel@...r.kernel.org
Cc:     dinguyen@...nel.org, devicetree@...r.kernel.org, robh@...nel.org,
        linux@...linux.org.uk, frowand.list@...il.com,
        keescook@...omium.org, anton@...msg.org, ccross@...roid.com,
        tony.luck@...el.com, daniel.thompson@...aro.org,
        linus.walleij@...aro.org, manivannan.sadhasivam@...aro.org,
        linux-arm-kernel@...ts.infradead.org, p.zabel@...gutronix.de
Subject: [PATCHv6] drivers/amba: add reset control to amba bus probe

The primecell controller on some SoCs, i.e. SoCFPGA, is held in reset by
default. Until recently, the DMA controller was brought out of reset by the
bootloader(i.e. U-Boot). But a recent change in U-Boot, the peripherals
that are not used are held in reset and are left to Linux to bring them
out of reset.

Add a mechanism for getting the reset property and de-assert the primecell
module from reset if found. This is a not a hard fail if the reset properti
is not present in the device tree node, so the driver will continue to
probe.

Because there are different variants of the controller that may have
multiple reset signals, the code will find all reset(s) specified and
de-assert them.

Signed-off-by: Dinh Nguyen <dinguyen@...nel.org>
Reviewed-by: Rob Herring <robh@...nel.org>
---
v6: remove the need to reset_control_get_count as
    of_reset_control_array_get_optional_shared is already doing that
v5: use of_reset_control_array_get_optional_shared()
v4: cleaned up indentation in loop
    fix up a few checkpatch warnings
    add Reviewed-by:
v3: add a reset_control_put()
    add error handling
v2: move reset control to bus code
    find all reset properties and de-assert them
---
 drivers/amba/bus.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 100e798a5c82..f39f075abff9 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -18,6 +18,7 @@
 #include <linux/limits.h>
 #include <linux/clk/clk-conf.h>
 #include <linux/platform_device.h>
+#include <linux/reset.h>
 
 #include <asm/irq.h>
 
@@ -401,6 +402,19 @@ static int amba_device_try_add(struct amba_device *dev, struct resource *parent)
 	ret = amba_get_enable_pclk(dev);
 	if (ret == 0) {
 		u32 pid, cid;
+		struct reset_control *rstc;
+
+		/*
+		 * Find reset control(s) of the amba bus and de-assert them.
+		 */
+		rstc = of_reset_control_array_get_optional_shared(dev->dev.of_node);
+		if (IS_ERR(rstc)) {
+			if (PTR_ERR(rstc) != -EPROBE_DEFER)
+				dev_err(&dev->dev, "Can't get amba reset!\n");
+			return PTR_ERR(rstc);
+		}
+		reset_control_deassert(rstc);
+		reset_control_put(rstc);
 
 		/*
 		 * Read pid and cid based on size of resource
-- 
2.20.0