| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 27 Aug 2019 20:53:05 +0530
From: kgunda@...eaurora.org
To: Vinod Koul <vkoul@...nel.org>
Cc: Andy Gross <agross@...nel.org>, linux-arm-msm@...r.kernel.org,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Stephen Boyd <sboyd@...nel.org>,
Sibi Sankar <sibis@...eaurora.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Niklas Cassel <niklas.cassel@...aro.org>,
linux-arm-msm-owner@...r.kernel.org
Subject: Re: [PATCH v4 6/8] arm64: dts: qcom: sm8150-mtp: Add regulators
On 2019-08-23 11:35, kgunda@...eaurora.org wrote:
> On 2019-08-22 00:12, Vinod Koul wrote:
>> Add the regulators found in the mtp platform. This platform consists
>> of
>> pmic PM8150, PM8150L and PM8009.
>>
>> Signed-off-by: Vinod Koul <vkoul@...nel.org>
>> Reviewed-by: Niklas Cassel <niklas.cassel@...aro.org>
>> ---
>> arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 324
>> ++++++++++++++++++++++++
>> 1 file changed, 324 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
>> b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
>> index 6f5777f530ae..aa5de42fcae4 100644
>> --- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
>> +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
>> @@ -6,6 +6,7 @@
>>
>> /dts-v1/;
>>
>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>> #include "sm8150.dtsi"
>> #include "pm8150.dtsi"
>> #include "pm8150b.dtsi"
>> @@ -22,6 +23,329 @@
>> chosen {
>> stdout-path = "serial0:115200n8";
>> };
>> +
>> + vph_pwr: vph-pwr-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vph_pwr";
>> + regulator-min-microvolt = <3700000>;
>> + regulator-max-microvolt = <3700000>;
>> + };
>> +
>> + /*
>> + * Apparently RPMh does not provide support for PM8150 S4 because it
>> + * is always-on; model it as a fixed regulator.
>> + */
>> + vreg_s4a_1p8: pm8150-s4 {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vreg_s4a_1p8";
>> +
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> +
>> + regulator-always-on;
>> + regulator-boot-on;
>> +
>> + vin-supply = <&vph_pwr>;
>> + };
>> +};
>> +
>> +&apps_rsc {
>> + pm8150-rpmh-regulators {
>> + compatible = "qcom,pm8150-rpmh-regulators";
>> + qcom,pmic-id = "a";
>> +
>> + vdd-s1-supply = <&vph_pwr>;
>> + vdd-s2-supply = <&vph_pwr>;
>> + vdd-s3-supply = <&vph_pwr>;
>> + vdd-s4-supply = <&vph_pwr>;
>> + vdd-s5-supply = <&vph_pwr>;
>> + vdd-s6-supply = <&vph_pwr>;
>> + vdd-s7-supply = <&vph_pwr>;
>> + vdd-s8-supply = <&vph_pwr>;
>> + vdd-s9-supply = <&vph_pwr>;
>> + vdd-s10-supply = <&vph_pwr>;
>> +
>> + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
>> + vdd-l2-l10-supply = <&vreg_bob>;
>> + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
> You no need to vote for the parent supply from the Linux driver. The
> parent/child dependency is completely taken care by the
> AOP/RPMh. Voting on the parent will create unnecessary additional RPMh
> transactions, which may degrade the performance.
>> + vdd-l6-l9-supply = <&vreg_s8c_1p3>;
>> + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
>> + vdd-l13-l16-l17-supply = <&vreg_bob>;
>> +
>> + vreg_s5a_2p0: smps5 {
>> + regulator-min-microvolt = <1904000>;
>> + regulator-max-microvolt = <2000000>;
>> + };
>> +
>> + vreg_s6a_0p9: smps6 {
>> + regulator-min-microvolt = <920000>;
>> + regulator-max-microvolt = <1128000>;
>> + };
>> +
>> + vdda_wcss_pll:
>> + vreg_l1a_0p75: ldo1 {
>> + regulator-min-microvolt = <752000>;
>> + regulator-max-microvolt = <752000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vdd_pdphy:
>> + vdda_usb_hs_3p1:
>> + vreg_l2a_3p1: ldo2 {
>> + regulator-min-microvolt = <3072000>;
>> + regulator-max-microvolt = <3072000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l3a_0p8: ldo3 {
>> + regulator-min-microvolt = <480000>;
>> + regulator-max-microvolt = <932000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vdd_usb_hs_core:
>> + vdda_csi_0_0p9:
>> + vdda_csi_1_0p9:
>> + vdda_csi_2_0p9:
>> + vdda_csi_3_0p9:
>> + vdda_dsi_0_0p9:
>> + vdda_dsi_1_0p9:
>> + vdda_dsi_0_pll_0p9:
>> + vdda_dsi_1_pll_0p9:
>> + vdda_pcie_1ln_core:
>> + vdda_pcie_2ln_core:
>> + vdda_pll_hv_cc_ebi01:
>> + vdda_pll_hv_cc_ebi23:
>> + vdda_qrefs_0p875_5:
>> + vdda_sp_sensor:
>> + vdda_ufs_2ln_core_1:
>> + vdda_ufs_2ln_core_2:
>> + vdda_usb_ss_dp_core_1:
>> + vdda_usb_ss_dp_core_2:
>> + vdda_qlink_lv:
>> + vdda_qlink_lv_ck:
Why few LDOs doesn't have the consumer names (handles) mentioned, while
few LDOs have them.
Can you have them for all LDOs?
>> + vreg_l5a_0p875: ldo5 {
>> + regulator-min-microvolt = <880000>;
>> + regulator-max-microvolt = <880000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l6a_1p2: ldo6 {
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l7a_1p8: ldo7 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vddpx_10:
>> + vreg_l9a_1p2: ldo9 {
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l10a_2p5: ldo10 {
>> + regulator-min-microvolt = <2504000>;
>> + regulator-max-microvolt = <2960000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l11a_0p8: ldo11 {
>> + regulator-min-microvolt = <800000>;
>> + regulator-max-microvolt = <800000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vdd_qfprom:
>> + vdd_qfprom_sp:
>> + vdda_apc_cs_1p8:
>> + vdda_gfx_cs_1p8:
>> + vdda_usb_hs_1p8:
>> + vdda_qrefs_vref_1p8:
>> + vddpx_10_a:
>> + vreg_l12a_1p8: ldo12 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l13a_2p7: ldo13 {
>> + regulator-min-microvolt = <2704000>;
>> + regulator-max-microvolt = <2704000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l14a_1p8: ldo14 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1880000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l15a_1p7: ldo15 {
>> + regulator-min-microvolt = <1704000>;
>> + regulator-max-microvolt = <1704000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l16a_2p7: ldo16 {
>> + regulator-min-microvolt = <2704000>;
>> + regulator-max-microvolt = <2960000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l17a_3p0: ldo17 {
>> + regulator-min-microvolt = <2856000>;
>> + regulator-max-microvolt = <3008000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> + };
>> +
>> + pm8150l-rpmh-regulators {
>> + compatible = "qcom,pm8150l-rpmh-regulators";
>> + qcom,pmic-id = "c";
>> +
>> + vdd-s1-supply = <&vph_pwr>;
>> + vdd-s2-supply = <&vph_pwr>;
>> + vdd-s3-supply = <&vph_pwr>;
>> + vdd-s4-supply = <&vph_pwr>;
>> + vdd-s5-supply = <&vph_pwr>;
>> + vdd-s6-supply = <&vph_pwr>;
>> + vdd-s7-supply = <&vph_pwr>;
>> + vdd-s8-supply = <&vph_pwr>;
>> +
>> + vdd-l1-l8-supply = <&vreg_s4a_1p8>;
>> + vdd-l2-l3-supply = <&vreg_s8c_1p3>;
>> + vdd-l4-l5-l6-supply = <&vreg_bob>;
>> + vdd-l7-l11-supply = <&vreg_bob>;
>> + vdd-l9-l10-supply = <&vreg_bob>;
>> +
>> + vdd-bob-supply = <&vph_pwr>;
>> + vdd-flash-supply = <&vreg_bob>;
>> + vdd-rgb-supply = <&vreg_bob>;
>> +
>> + vreg_bob: bob {
>> + regulator-min-microvolt = <3008000>;
>> + regulator-max-microvolt = <4000000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
>> + regulator-allow-bypass;
>> + };
>> +
>> + vreg_s8c_1p3: smps8 {
>> + regulator-min-microvolt = <1352000>;
>> + regulator-max-microvolt = <1352000>;
>> + };
>> +
>> + vreg_l1c_1p8: ldo1 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vdda_wcss_adcdac_1:
>> + vdda_wcss_adcdac_22:
>> + vreg_l2c_1p3: ldo2 {
>> + regulator-min-microvolt = <1304000>;
>> + regulator-max-microvolt = <1304000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vdda_hv_ebi0:
>> + vdda_hv_ebi1:
>> + vdda_hv_ebi2:
>> + vdda_hv_ebi3:
>> + vdda_hv_refgen0:
>> + vdda_qlink_hv_ck:
>> + vreg_l3c_1p2: ldo3 {
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vddpx_5:
>> + vreg_l4c_1p8: ldo4 {
>> + regulator-min-microvolt = <1704000>;
>> + regulator-max-microvolt = <2928000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vddpx_6:
>> + vreg_l5c_1p8: ldo5 {
>> + regulator-min-microvolt = <1704000>;
>> + regulator-max-microvolt = <2928000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vddpx_2:
>> + vreg_l6c_2p9: ldo6 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <2960000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l7c_3p0: ldo7 {
>> + regulator-min-microvolt = <2856000>;
>> + regulator-max-microvolt = <3104000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l8c_1p8: ldo8 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l9c_2p9: ldo9 {
>> + regulator-min-microvolt = <2704000>;
>> + regulator-max-microvolt = <2960000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l10c_3p3: ldo10 {
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3312000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l11c_3p3: ldo11 {
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3312000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> + };
>> +
>> + pm8009-rpmh-regulators {
>> + compatible = "qcom,pm8009-rpmh-regulators";
>> + qcom,pmic-id = "f";
>> +
>> + vdd-s1-supply = <&vph_pwr>;
>> + vdd-s2-supply = <&vreg_bob>;
>> +
>> + vdd-l2-supply = <&vreg_s8c_1p3>;
>> + vdd-l5-l6-supply = <&vreg_bob>;
>> +
>> + vreg_l2f_1p2: ldo2 {
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l5f_2p85: ldo5 {
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l6f_2p85: ldo6 {
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + regulator-min-microvolt = <2856000>;
>> + regulator-max-microvolt = <2856000>;
>> + };
>> + };
>> };
>>
>> &qupv3_id_1 {
Powered by blists - more mailing lists