linux-kernel - Re: [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <c70b4cc8-466d-3b20-2b0c-ff456f1b7b97@ti.com>
Date:   Tue, 27 Aug 2019 11:03:22 +0530
From:   Vignesh Raghavendra <vigneshr@...com>
To:     <Tudor.Ambarus@...rochip.com>, <boris.brezillon@...labora.com>,
        <marek.vasut@...il.com>, <miquel.raynal@...tlin.com>,
        <richard@....at>, <linux-mtd@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
Subject: Re: [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core



On 26/08/19 5:38 PM, Tudor.Ambarus@...rochip.com wrote:
> From: Tudor Ambarus <tudor.ambarus@...rochip.com>
[...]
> 
> Tested on sst26vf064b with atmel-quadspi SPIMEM driver.
> 

Tested s25fl256s, mx66l51235l with ti-qspi and s25fl512s with
cadence-quadspi. n25q128a13 with legacy 1 bit SPI controller.

> Boris Brezillon (7):
>   mtd: spi-nor: Add a default_init() fixup hook for gd25q256
>   mtd: spi-nor: Create a ->set_4byte() method
>   mtd: spi-nor: Rework the SPI NOR lock/unlock logic
>   mtd: spi-nor: Add post_sfdp() hook to tweak flash config
>   mtd: spi-nor: Add spansion_post_sfdp_fixups()
>   mtd: spi-nor: Add a ->convert_addr() method
>   mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag
> 
> Tudor Ambarus (13):
>   mtd: spi-nor: Regroup flash parameter and settings
>   mtd: spi-nor: Use nor->params
>   mtd: spi-nor: Drop quad_enable() from 'struct spi-nor'
>   mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter'
>   mtd: spi-nor: Add default_init() hook to tweak flash parameters
>   mtd: spi_nor: Move manufacturer quad_enable() in ->default_init()
>   mtd: spi-nor: Split spi_nor_init_params()
>   mtd: spi_nor: Add a ->setup() method
>   mtd: spi-nor: Add s3an_post_sfdp_fixups()
>   mtd: spi-nor: Bring flash params init together
>   mtd: spi_nor: Introduce spi_nor_set_addr_width()
>   mtd: spi-nor: Introduce spi_nor_get_flash_info()
>   mtd: spi-nor: Rework the disabling of block write protection
> 
>  drivers/mtd/spi-nor/spi-nor.c | 1304 +++++++++++++++++++++++------------------
>  include/linux/mtd/spi-nor.h   |  298 +++++++---
>  2 files changed, 927 insertions(+), 675 deletions(-)
> 

-- 
Regards
Vignesh