| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <SN6PR12MB273448A314407D72A764D76EC3A00@SN6PR12MB2734.namprd12.prod.outlook.com>
Date: Tue, 27 Aug 2019 09:29:53 +0000
From: Krishna Yarlagadda <kyarlagadda@...dia.com>
To: Thierry Reding <thierry.reding@...il.com>
CC: "gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
Jonathan Hunter <jonathanh@...dia.com>,
"Laxman Dewangan" <ldewangan@...dia.com>,
"jslaby@...e.com" <jslaby@...e.com>,
"linux-serial@...r.kernel.org" <linux-serial@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-tegra@...r.kernel.org" <linux-tegra@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"Shardar Mohammed" <smohammed@...dia.com>
Subject: RE: [PATCH 08/14] serial: tegra: check for FIFO mode enabled status
> -----Original Message-----
> From: linux-tegra-owner@...r.kernel.org <linux-tegra-
> owner@...r.kernel.org> On Behalf Of Thierry Reding
> Sent: Tuesday, August 13, 2019 3:34 PM
> To: Krishna Yarlagadda <kyarlagadda@...dia.com>
> Cc: gregkh@...uxfoundation.org; robh+dt@...nel.org;
> mark.rutland@....com; Jonathan Hunter <jonathanh@...dia.com>; Laxman
> Dewangan <ldewangan@...dia.com>; jslaby@...e.com; linux-
> serial@...r.kernel.org; devicetree@...r.kernel.org; linux-
> tegra@...r.kernel.org; linux-kernel@...r.kernel.org; Shardar Mohammed
> <smohammed@...dia.com>
> Subject: Re: [PATCH 08/14] serial: tegra: check for FIFO mode enabled status
>
> On Mon, Aug 12, 2019 at 04:58:17PM +0530, Krishna Yarlagadda wrote:
> > Chips prior to Tegra186 needed delay of 3 UART clock cycles to avoid
> > data loss. This issue is fixed in Tegra186 and a new flag is added to
> > check if fifo mode is enabled. chip data updated to check if this flag
> > is available for a chip. Tegra186 has new compatible to enable this
> > flag.
> >
> > Signed-off-by: Shardar Shariff Md <smohammed@...dia.com>
> > Signed-off-by: Krishna Yarlagadda <kyarlagadda@...dia.com>
> > ---
> > drivers/tty/serial/serial-tegra.c | 52
> > ++++++++++++++++++++++++++++++++++-----
> > 1 file changed, 46 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/tty/serial/serial-tegra.c
> > b/drivers/tty/serial/serial-tegra.c
> > index 7ab81bb..e0379d9 100644
> > --- a/drivers/tty/serial/serial-tegra.c
> > +++ b/drivers/tty/serial/serial-tegra.c
> > @@ -72,6 +72,8 @@
> > #define TEGRA_TX_PIO 1
> > #define TEGRA_TX_DMA 2
> >
> > +#define TEGRA_UART_FCR_IIR_FIFO_EN 0x40
> > +
> > /**
> > * tegra_uart_chip_data: SOC specific data.
> > *
> > @@ -84,6 +86,7 @@ struct tegra_uart_chip_data {
> > bool tx_fifo_full_status;
> > bool allow_txfifo_reset_fifo_mode;
> > bool support_clk_src_div;
> > + bool fifo_mode_enable_status;
> > };
> >
> > struct tegra_uart_port {
> > @@ -263,6 +266,22 @@ static void tegra_uart_wait_sym_time(struct
> tegra_uart_port *tup,
> > tup->current_baud));
> > }
> >
> > +static int tegra_uart_is_fifo_mode_enabled(struct tegra_uart_port
> > +*tup)
>
> I think this is a bad name. "is" makes it sound like this will return a boolean
> value. Also, this doesn't really check whether FIFO mode is enabled, but
> rather it waits for the FIFO mode to become enabled.
> Perhaps, then, a better name would be
>
> tegra_uart_wait_fifo_mode_enabled()
>
> ?
>
Sounds good. Will make changes
> > +{
> > + unsigned long iir;
> > + unsigned int tmout = 100;
> > +
> > + do {
> > + iir = tegra_uart_read(tup, UART_IIR);
> > + if (iir & TEGRA_UART_FCR_IIR_FIFO_EN)
> > + return 0;
> > + udelay(1);
> > + } while (--tmout);
> > + dev_err(tup->uport.dev, "FIFO mode not enabled\n");
>
> I'd push this out to callers. That way this function becomes useful in
> situations where you don't want to output an error.
>
> > +
> > + return -EIO;
>
> -ETIMEDOUT?
>
> Thierry
>
Will push this to caller and change the error code
KY
> > +}
> > +
> > static void tegra_uart_fifo_reset(struct tegra_uart_port *tup, u8
> > fcr_bits) {
> > unsigned long fcr = tup->fcr_shadow; @@ -282,6 +301,8 @@ static
> void
> > tegra_uart_fifo_reset(struct tegra_uart_port *tup, u8 fcr_bits)
> > tegra_uart_write(tup, fcr, UART_FCR);
> > fcr |= UART_FCR_ENABLE_FIFO;
> > tegra_uart_write(tup, fcr, UART_FCR);
> > + if (tup->cdata->fifo_mode_enable_status)
> > + tegra_uart_is_fifo_mode_enabled(tup);
> > }
> >
> > /* Dummy read to ensure the write is posted */ @@ -918,12 +939,19
> @@
> > static int tegra_uart_hw_init(struct tegra_uart_port *tup)
> > /* Dummy read to ensure the write is posted */
> > tegra_uart_read(tup, UART_SCR);
> >
> > - /*
> > - * For all tegra devices (up to t210), there is a hardware issue that
> > - * requires software to wait for 3 UART clock periods after enabling
> > - * the TX fifo, otherwise data could be lost.
> > - */
> > - tegra_uart_wait_cycle_time(tup, 3);
> > + if (tup->cdata->fifo_mode_enable_status) {
> > + ret = tegra_uart_is_fifo_mode_enabled(tup);
> > + if (ret < 0)
> > + return ret;
> > + } else {
> > + /*
> > + * For all tegra devices (up to t210), there is a hardware
> > + * issue that requires software to wait for 3 UART clock
> > + * periods after enabling the TX fifo, otherwise data could
> > + * be lost.
> > + */
> > + tegra_uart_wait_cycle_time(tup, 3);
> > + }
> >
> > /*
> > * Initialize the UART with default configuration @@ -1294,12
> > +1322,21 @@ static struct tegra_uart_chip_data tegra20_uart_chip_data =
> {
> > .tx_fifo_full_status = false,
> > .allow_txfifo_reset_fifo_mode = true,
> > .support_clk_src_div = false,
> > + .fifo_mode_enable_status = false,
> > };
> >
> > static struct tegra_uart_chip_data tegra30_uart_chip_data = {
> > .tx_fifo_full_status = true,
> > .allow_txfifo_reset_fifo_mode = false,
> > .support_clk_src_div = true,
> > + .fifo_mode_enable_status = false,
> > +};
> > +
> > +static struct tegra_uart_chip_data tegra186_uart_chip_data = {
> > + .tx_fifo_full_status = true,
> > + .allow_txfifo_reset_fifo_mode = false,
> > + .support_clk_src_div = true,
> > + .fifo_mode_enable_status = true,
> > };
> >
> > static const struct of_device_id tegra_uart_of_match[] = { @@ -1310,6
> > +1347,9 @@ static const struct of_device_id tegra_uart_of_match[] = {
> > .compatible = "nvidia,tegra20-hsuart",
> > .data = &tegra20_uart_chip_data,
> > }, {
> > + .compatible = "nvidia,tegra186-hsuart",
> > + .data = &tegra186_uart_chip_data,
> > + }, {
> > },
> > };
> > MODULE_DEVICE_TABLE(of, tegra_uart_of_match);
> > --
> > 2.7.4
> >
Powered by blists - more mailing lists