linux-kernel - [PATCH v2] mmc: mediatek: enable SDIO IRQ low level trigger function

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1566985524-22749-2-git-send-email-yong.mao@mediatek.com>
Date:   Wed, 28 Aug 2019 17:45:24 +0800
From:   Yong Mao <yong.mao@...iatek.com>
To:     Ulf Hansson <ulf.hansson@...aro.org>
CC:     Chaotian Jing <chaotian.jing@...iatek.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        <linux-mmc@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <srv_heupstream@...iatek.com>,
        yong mao <yong.mao@...iatek.com>
Subject: [PATCH v2] mmc: mediatek: enable SDIO IRQ low level trigger function

From: yong mao <yong.mao@...iatek.com>

SDIO IRQ is not defaultly triggered by low level,
but by falling edge. It needs to set related register
to enable SDIO IRQ low level trigger function.
Otherwise the SDIO IRQ may be lost in some specail condition.

Signed-off-by: Yong Mao <yong.mao@...iatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@...iatek.com>
---
 drivers/mmc/host/mtk-sd.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 33f4b63..585f0c7 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -192,6 +192,7 @@
 #define SDC_STS_CMDBUSY         (0x1 << 1)	/* RW */
 #define SDC_STS_SWR_COMPL       (0x1 << 31)	/* RW */
 
+#define SDC_DAT1_IRQ_TRIGGER	(0x1 << 19)	/* RW */
 /* SDC_ADV_CFG0 mask */
 #define SDC_RX_ENHANCE_EN	(0x1 << 20)	/* RW */
 
@@ -1568,6 +1569,7 @@ static void msdc_init_hw(struct msdc_host *host)
 
 	/* Config SDIO device detect interrupt function */
 	sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+	sdr_set_bits(host->base + SDC_ADV_CFG0, SDC_DAT1_IRQ_TRIGGER);
 
 	/* Configure to default data timeout */
 	sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, 3);
-- 
1.9.1