| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1567054348-19685-2-git-send-email-srinath.mannam@broadcom.com>
Date: Thu, 29 Aug 2019 10:22:27 +0530
From: Srinath Mannam <srinath.mannam@...adcom.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>
Cc: bcm-kernel-feedback-list@...adcom.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Li Jin <li.jin@...adcom.com>
Subject: [PATCH 1/2] gpio: iproc-gpio: Fix incorrect pinconf configurations
From: Li Jin <li.jin@...adcom.com>
Fix drive strength for AON/CRMU controller; fix pull-up/down setting
for CCM/CDRU controller.
Fixes: 616043d58a89 ("pinctrl: Rename gpio driver from cygnus to iproc")
Signed-off-by: Li Jin <li.jin@...adcom.com>
---
drivers/pinctrl/bcm/pinctrl-iproc-gpio.c | 96 +++++++++++++++++++++++++-------
1 file changed, 77 insertions(+), 19 deletions(-)
diff --git a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
index b70058c..20b9864 100644
--- a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
+++ b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
@@ -54,8 +54,12 @@
/* drive strength control for ASIU GPIO */
#define IPROC_GPIO_ASIU_DRV0_CTRL_OFFSET 0x58
-/* drive strength control for CCM/CRMU (AON) GPIO */
-#define IPROC_GPIO_DRV0_CTRL_OFFSET 0x00
+/* pinconf for CCM GPIO */
+#define IPROC_GPIO_PULL_DN_OFFSET 0x10
+#define IPROC_GPIO_PULL_UP_OFFSET 0x14
+
+/* pinconf for CRMU(aon) GPIO and CCM GPIO*/
+#define IPROC_GPIO_DRV_CTRL_OFFSET 0x00
#define GPIO_BANK_SIZE 0x200
#define NGPIOS_PER_BANK 32
@@ -76,6 +80,12 @@ enum iproc_pinconf_param {
IPROC_PINCON_MAX,
};
+enum iproc_pinconf_ctrl_type {
+ IOCTRL_TYPE_AON = 1,
+ IOCTRL_TYPE_CDRU,
+ IOCTRL_TYPE_INVALID,
+};
+
/*
* Iproc GPIO core
*
@@ -100,6 +110,7 @@ struct iproc_gpio {
void __iomem *base;
void __iomem *io_ctrl;
+ enum iproc_pinconf_ctrl_type io_ctrl_type;
raw_spinlock_t lock;
@@ -461,20 +472,44 @@ static const struct pinctrl_ops iproc_pctrl_ops = {
static int iproc_gpio_set_pull(struct iproc_gpio *chip, unsigned gpio,
bool disable, bool pull_up)
{
+ void __iomem *base;
unsigned long flags;
+ unsigned int shift;
+ u32 val_1, val_2;
raw_spin_lock_irqsave(&chip->lock, flags);
-
- if (disable) {
- iproc_set_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio, false);
+ if (chip->io_ctrl_type == IOCTRL_TYPE_CDRU) {
+ base = chip->io_ctrl;
+ shift = IPROC_GPIO_SHIFT(gpio);
+
+ val_1 = readl(base + IPROC_GPIO_PULL_UP_OFFSET);
+ val_2 = readl(base + IPROC_GPIO_PULL_DN_OFFSET);
+ if (disable) {
+ /* no pull-up or pull-down */
+ val_1 &= ~BIT(shift);
+ val_2 &= ~BIT(shift);
+ } else if (pull_up) {
+ val_1 |= BIT(shift);
+ val_2 &= ~BIT(shift);
+ } else {
+ val_1 &= ~BIT(shift);
+ val_2 |= BIT(shift);
+ }
+ writel(val_1, base + IPROC_GPIO_PULL_UP_OFFSET);
+ writel(val_2, base + IPROC_GPIO_PULL_DN_OFFSET);
} else {
- iproc_set_bit(chip, IPROC_GPIO_PAD_RES_OFFSET, gpio,
- pull_up);
- iproc_set_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio, true);
+ if (disable) {
+ iproc_set_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio,
+ false);
+ } else {
+ iproc_set_bit(chip, IPROC_GPIO_PAD_RES_OFFSET, gpio,
+ pull_up);
+ iproc_set_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio,
+ true);
+ }
}
raw_spin_unlock_irqrestore(&chip->lock, flags);
-
dev_dbg(chip->dev, "gpio:%u set pullup:%d\n", gpio, pull_up);
return 0;
@@ -483,14 +518,35 @@ static int iproc_gpio_set_pull(struct iproc_gpio *chip, unsigned gpio,
static void iproc_gpio_get_pull(struct iproc_gpio *chip, unsigned gpio,
bool *disable, bool *pull_up)
{
+ void __iomem *base;
unsigned long flags;
+ unsigned int shift;
+ u32 val_1, val_2;
raw_spin_lock_irqsave(&chip->lock, flags);
- *disable = !iproc_get_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio);
- *pull_up = iproc_get_bit(chip, IPROC_GPIO_PAD_RES_OFFSET, gpio);
+ if (chip->io_ctrl_type == IOCTRL_TYPE_CDRU) {
+ base = chip->io_ctrl;
+ shift = IPROC_GPIO_SHIFT(gpio);
+
+ val_1 = readl(base + IPROC_GPIO_PULL_UP_OFFSET) & BIT(shift);
+ val_2 = readl(base + IPROC_GPIO_PULL_DN_OFFSET) & BIT(shift);
+
+ *pull_up = val_1 ? true : false;
+ *disable = (val_1 | val_2) ? false : true;
+
+ } else {
+ *disable = !iproc_get_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio);
+ *pull_up = iproc_get_bit(chip, IPROC_GPIO_PAD_RES_OFFSET, gpio);
+ }
raw_spin_unlock_irqrestore(&chip->lock, flags);
}
+#define DRV_STRENGTH_OFFSET(gpio, bit, type) ((type) == IOCTRL_TYPE_AON ? \
+ ((2 - (bit)) * 4 + IPROC_GPIO_DRV_CTRL_OFFSET) : \
+ ((type) == IOCTRL_TYPE_CDRU) ? \
+ ((bit) * 4 + IPROC_GPIO_DRV_CTRL_OFFSET) : \
+ ((bit) * 4 + IPROC_GPIO_REG(gpio, IPROC_GPIO_ASIU_DRV0_CTRL_OFFSET)))
+
static int iproc_gpio_set_strength(struct iproc_gpio *chip, unsigned gpio,
unsigned strength)
{
@@ -505,11 +561,8 @@ static int iproc_gpio_set_strength(struct iproc_gpio *chip, unsigned gpio,
if (chip->io_ctrl) {
base = chip->io_ctrl;
- offset = IPROC_GPIO_DRV0_CTRL_OFFSET;
} else {
base = chip->base;
- offset = IPROC_GPIO_REG(gpio,
- IPROC_GPIO_ASIU_DRV0_CTRL_OFFSET);
}
shift = IPROC_GPIO_SHIFT(gpio);
@@ -520,11 +573,11 @@ static int iproc_gpio_set_strength(struct iproc_gpio *chip, unsigned gpio,
raw_spin_lock_irqsave(&chip->lock, flags);
strength = (strength / 2) - 1;
for (i = 0; i < GPIO_DRV_STRENGTH_BITS; i++) {
+ offset = DRV_STRENGTH_OFFSET(gpio, i, chip->io_ctrl_type);
val = readl(base + offset);
val &= ~BIT(shift);
val |= ((strength >> i) & 0x1) << shift;
writel(val, base + offset);
- offset += 4;
}
raw_spin_unlock_irqrestore(&chip->lock, flags);
@@ -541,11 +594,8 @@ static int iproc_gpio_get_strength(struct iproc_gpio *chip, unsigned gpio,
if (chip->io_ctrl) {
base = chip->io_ctrl;
- offset = IPROC_GPIO_DRV0_CTRL_OFFSET;
} else {
base = chip->base;
- offset = IPROC_GPIO_REG(gpio,
- IPROC_GPIO_ASIU_DRV0_CTRL_OFFSET);
}
shift = IPROC_GPIO_SHIFT(gpio);
@@ -553,10 +603,10 @@ static int iproc_gpio_get_strength(struct iproc_gpio *chip, unsigned gpio,
raw_spin_lock_irqsave(&chip->lock, flags);
*strength = 0;
for (i = 0; i < GPIO_DRV_STRENGTH_BITS; i++) {
+ offset = DRV_STRENGTH_OFFSET(gpio, i, chip->io_ctrl_type);
val = readl(base + offset) & BIT(shift);
val >>= shift;
*strength += (val << i);
- offset += 4;
}
/* convert to mA */
@@ -734,6 +784,7 @@ static int iproc_gpio_probe(struct platform_device *pdev)
u32 ngpios, pinconf_disable_mask = 0;
int irq, ret;
bool no_pinconf = false;
+ enum iproc_pinconf_ctrl_type io_ctrl_type = IOCTRL_TYPE_INVALID;
/* NSP does not support drive strength config */
if (of_device_is_compatible(dev->of_node, "brcm,iproc-nsp-gpio"))
@@ -764,8 +815,15 @@ static int iproc_gpio_probe(struct platform_device *pdev)
dev_err(dev, "unable to map I/O memory\n");
return PTR_ERR(chip->io_ctrl);
}
+ if (of_device_is_compatible(dev->of_node,
+ "brcm,cygnus-ccm-gpio"))
+ io_ctrl_type = IOCTRL_TYPE_CDRU;
+ else
+ io_ctrl_type = IOCTRL_TYPE_AON;
}
+ chip->io_ctrl_type = io_ctrl_type;
+
if (of_property_read_u32(dev->of_node, "ngpios", &ngpios)) {
dev_err(&pdev->dev, "missing ngpios DT property\n");
return -ENODEV;
--
2.7.4
Powered by blists - more mailing lists