| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190829215224.27956-1-chris.packham@alliedtelesis.co.nz>
Date: Fri, 30 Aug 2019 09:52:24 +1200
From: Chris Packham <chris.packham@...iedtelesis.co.nz>
To: wim@...ux-watchdog.org, linux@...ck-us.net
Cc: linux-watchdog@...r.kernel.org, linux-kernel@...r.kernel.org,
Chris Packham <chris.packham@...iedtelesis.co.nz>
Subject: [PATCH v6] watchdog: orion_wdt: use timer1 as a pretimeout
The orion watchdog can either reset the CPU or generate an interrupt.
The interrupt would be useful for debugging as it provides panic()
output about the watchdog expiry, however if the interrupt is used the
watchdog can't reset the CPU in the event of being stuck in a loop with
interrupts disabled or if the CPU is prevented from accessing memory
(e.g. an unterminated DMA).
The Armada SoCs have spare timers that aren't currently used by the
Linux kernel. We can use timer1 to provide a pre-timeout ahead of the
watchdog timer and provide the possibility of gathering debug before the
reset triggers.
Signed-off-by: Chris Packham <chris.packham@...iedtelesis.co.nz>
---
Changes in v6:
- Fix bitwise operation in armada375_stop()
- Add comment about 2nd interrupt being optional
Changes in v5:
- Group bit values with register addresses
- Address review comments from Gunter
Changes in v3:
- rebase against linux/master
Changes in v2:
- apply changes to armada-38x only
drivers/watchdog/orion_wdt.c | 66 +++++++++++++++++++++++++++++-------
1 file changed, 53 insertions(+), 13 deletions(-)
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index cdb0d174c5e2..1cccf8eb1c5d 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -35,7 +35,15 @@
* Watchdog timer block registers.
*/
#define TIMER_CTRL 0x0000
-#define TIMER_A370_STATUS 0x04
+#define TIMER1_FIXED_ENABLE_BIT BIT(12)
+#define WDT_AXP_FIXED_ENABLE_BIT BIT(10)
+#define TIMER1_ENABLE_BIT BIT(2)
+
+#define TIMER_A370_STATUS 0x0004
+#define WDT_A370_EXPIRED BIT(31)
+#define TIMER1_STATUS_BIT BIT(8)
+
+#define TIMER1_VAL_OFF 0x001c
#define WDT_MAX_CYCLE_COUNT 0xffffffff
@@ -43,9 +51,6 @@
#define WDT_A370_RATIO_SHIFT 5
#define WDT_A370_RATIO (1 << WDT_A370_RATIO_SHIFT)
-#define WDT_AXP_FIXED_ENABLE_BIT BIT(10)
-#define WDT_A370_EXPIRED BIT(31)
-
static bool nowayout = WATCHDOG_NOWAYOUT;
static int heartbeat = -1; /* module parameter (seconds) */
@@ -158,6 +163,7 @@ static int armadaxp_wdt_clock_init(struct platform_device *pdev,
struct orion_watchdog *dev)
{
int ret;
+ u32 val;
dev->clk = of_clk_get_by_name(pdev->dev.of_node, "fixed");
if (IS_ERR(dev->clk))
@@ -168,10 +174,9 @@ static int armadaxp_wdt_clock_init(struct platform_device *pdev,
return ret;
}
- /* Enable the fixed watchdog clock input */
- atomic_io_modify(dev->reg + TIMER_CTRL,
- WDT_AXP_FIXED_ENABLE_BIT,
- WDT_AXP_FIXED_ENABLE_BIT);
+ /* Fix the wdt and timer1 clock freqency to 25MHz */
+ val = WDT_AXP_FIXED_ENABLE_BIT | TIMER1_FIXED_ENABLE_BIT;
+ atomic_io_modify(dev->reg + TIMER_CTRL, val, val);
dev->clk_rate = clk_get_rate(dev->clk);
return 0;
@@ -183,6 +188,10 @@ static int orion_wdt_ping(struct watchdog_device *wdt_dev)
/* Reload watchdog duration */
writel(dev->clk_rate * wdt_dev->timeout,
dev->reg + dev->data->wdt_counter_offset);
+ if (dev->wdt.info->options & WDIOF_PRETIMEOUT)
+ writel(dev->clk_rate * (wdt_dev->timeout - wdt_dev->pretimeout),
+ dev->reg + TIMER1_VAL_OFF);
+
return 0;
}
@@ -194,13 +203,18 @@ static int armada375_start(struct watchdog_device *wdt_dev)
/* Set watchdog duration */
writel(dev->clk_rate * wdt_dev->timeout,
dev->reg + dev->data->wdt_counter_offset);
+ if (dev->wdt.info->options & WDIOF_PRETIMEOUT)
+ writel(dev->clk_rate * (wdt_dev->timeout - wdt_dev->pretimeout),
+ dev->reg + TIMER1_VAL_OFF);
/* Clear the watchdog expiration bit */
atomic_io_modify(dev->reg + TIMER_A370_STATUS, WDT_A370_EXPIRED, 0);
/* Enable watchdog timer */
- atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit,
- dev->data->wdt_enable_bit);
+ reg = dev->data->wdt_enable_bit;
+ if (dev->wdt.info->options & WDIOF_PRETIMEOUT)
+ reg |= TIMER1_ENABLE_BIT;
+ atomic_io_modify(dev->reg + TIMER_CTRL, reg, reg);
/* Enable reset on watchdog */
reg = readl(dev->rstout);
@@ -277,7 +291,7 @@ static int orion_stop(struct watchdog_device *wdt_dev)
static int armada375_stop(struct watchdog_device *wdt_dev)
{
struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
- u32 reg;
+ u32 reg, mask;
/* Disable reset on watchdog */
atomic_io_modify(dev->rstout_mask, dev->data->rstout_mask_bit,
@@ -287,7 +301,10 @@ static int armada375_stop(struct watchdog_device *wdt_dev)
writel(reg, dev->rstout);
/* Disable watchdog timer */
- atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit, 0);
+ mask = dev->data->wdt_enable_bit;
+ if (wdt_dev->info->options & WDIOF_PRETIMEOUT)
+ mask |= TIMER1_ENABLE_BIT;
+ atomic_io_modify(dev->reg + TIMER_CTRL, mask, 0);
return 0;
}
@@ -349,7 +366,7 @@ static unsigned int orion_wdt_get_timeleft(struct watchdog_device *wdt_dev)
return readl(dev->reg + dev->data->wdt_counter_offset) / dev->clk_rate;
}
-static const struct watchdog_info orion_wdt_info = {
+static struct watchdog_info orion_wdt_info = {
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
.identity = "Orion Watchdog",
};
@@ -368,6 +385,16 @@ static irqreturn_t orion_wdt_irq(int irq, void *devid)
return IRQ_HANDLED;
}
+static irqreturn_t orion_wdt_pre_irq(int irq, void *devid)
+{
+ struct orion_watchdog *dev = devid;
+
+ atomic_io_modify(dev->reg + TIMER_A370_STATUS,
+ TIMER1_STATUS_BIT, 0);
+ watchdog_notify_pretimeout(&dev->wdt);
+ return IRQ_HANDLED;
+}
+
/*
* The original devicetree binding for this driver specified only
* one memory resource, so in order to keep DT backwards compatibility
@@ -589,6 +616,19 @@ static int orion_wdt_probe(struct platform_device *pdev)
}
}
+ /* Optional 2nd interrupt for pretimeout */
+ irq = platform_get_irq(pdev, 1);
+ if (irq > 0) {
+ orion_wdt_info.options |= WDIOF_PRETIMEOUT;
+ ret = devm_request_irq(&pdev->dev, irq, orion_wdt_pre_irq,
+ 0, pdev->name, dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to request IRQ\n");
+ goto disable_clk;
+ }
+ }
+
+
watchdog_set_nowayout(&dev->wdt, nowayout);
ret = watchdog_register_device(&dev->wdt);
if (ret)
--
2.23.0
Powered by blists - more mailing lists