[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <cover.1567071213.git.vitor.soares@synopsys.com>
Date: Thu, 29 Aug 2019 12:19:31 +0200
From: Vitor Soares <Vitor.Soares@...opsys.com>
To: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-i3c@...ts.infradead.org
Cc: bbrezillon@...nel.org, robh+dt@...nel.org, mark.rutland@....com,
Joao.Pinto@...opsys.com, Vitor Soares <Vitor.Soares@...opsys.com>
Subject: [PATCH 0/4] i3c: remove device if failed on pre_assign_dyn_addr()
This patch series remove the devices that fail during
pre_assign_dyn_addr() and were being sent on DEFSVLS command.
With the change above, during the i3c_master_add_i3c_dev_locked() is
necessary to check if the device has i3c_boardinfo and try to assign the
i3c_dev_boardinfo->init_dyn_addr if there no oldev. This change will
allow to describe in DT device with preferable dynamic address but without
static address.
Vitor Soares (4):
"i3c: detach and free device if pre_assign_dyn_addr fails "
i3c: check i3c_boardinfo during i3c_master_add_i3c_dev_locked
update i3c bingins
i3c: master: dw: Reattach device on first empty location of DAT
Documentation/devicetree/bindings/i3c/i3c.txt | 13 ++++++++---
drivers/i3c/master.c | 33 ++++++++++++++++++++++++---
drivers/i3c/master/dw-i3c-master.c | 16 +++++++++++++
3 files changed, 56 insertions(+), 6 deletions(-)
--
2.7.4
Powered by blists - more mailing lists