[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <TY1PR01MB177060B843107361FEF44022C0A20@TY1PR01MB1770.jpnprd01.prod.outlook.com>
Date: Thu, 29 Aug 2019 14:38:06 +0000
From: Fabrizio Castro <fabrizio.castro@...renesas.com>
To: Rob Herring <robh+dt@...nel.org>
CC: David Airlie <airlied@...ux.ie>, Daniel Vetter <daniel@...ll.ch>,
Mark Rutland <mark.rutland@....com>,
dri-devel <dri-devel@...ts.freedesktop.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Simon Horman <horms@...ge.net.au>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Chris Paterson <Chris.Paterson2@...esas.com>,
Biju Das <biju.das@...renesas.com>,
"open list:MEDIA DRIVERS FOR RENESAS - FCP"
<linux-renesas-soc@...r.kernel.org>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Kieran Bingham <kieran.bingham+renesas@...asonboard.com>,
Jacopo Mondi <jacopo+renesas@...ndi.org>,
Sam Ravnborg <sam@...nborg.org>
Subject: RE: [PATCH v3 1/8] dt-bindings: display: Add bindings for LVDS
bus-timings
Hi Rob,
Thank you for your feedback!
> From: Rob Herring <robh+dt@...nel.org>
> Sent: 29 August 2019 15:03
> Subject: Re: [PATCH v3 1/8] dt-bindings: display: Add bindings for LVDS bus-timings
>
> On Wed, Aug 28, 2019 at 1:36 PM Fabrizio Castro
> <fabrizio.castro@...renesas.com> wrote:
> >
> > Dual-LVDS connections need markers in the DT, this patch adds
> > some common documentation to be referenced by both panels and
> > bridges.
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro@...renesas.com>
> >
> > ---
> > v2->v3:
> > * new patch
> > ---
> > .../bindings/display/bus-timings/lvds.yaml | 38 ++++++++++++++++++++++
> > 1 file changed, 38 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/display/bus-timings/lvds.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/bus-timings/lvds.yaml b/Documentation/devicetree/bindings/display/bus-
> timings/lvds.yaml
> > new file mode 100644
> > index 0000000..f35b55a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bus-timings/lvds.yaml
> > @@ -0,0 +1,38 @@
> > +# SPDX-License-Identifier: GPL-2.0
>
> (GPL-2.0-only OR BSD-2-Clause) is preferred for new bindings.
>
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/bus-timings/lvds.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Common Properties for bus timings of LVDS interfaces
> > +
> > +maintainers:
> > + - Thierry Reding <thierry.reding@...il.com>
> > + - Fabrizio Castro <fabrizio.castro@...renesas.com>
> > +
> > +description: |
> > + This document defines device tree properties common to LVDS and dual-LVDS
> > + interfaces, where a dual-LVDS interface is a dual-link connection with even
> > + pixels traveling on one connection, and with odd pixels traveling on the other
> > + connection.
> > + This document doesn't constitue a device tree binding specification by itself
>
> typo: constitute
Well spotted!
>
> > + but is meant to be referenced by device tree bindings.
> > + When referenced from panel or bridge device tree bindings, the properties
> > + defined in this document are defined as follows. The panel and bridge device
> > + tree bindings are responsible for defining whether each property is required
> > + or optional.
> > +
> > +properties:
> > + dual-lvds-even-pixels:
> > + type: boolean
> > + description:
> > + This property is specific to an input port of a sink device. When
>
> The schema should define what nodes these go in. The description seems
> to indicate in 'port' nodes (or endpoint?), but your use in the panel
> binding puts them in the parent.
Did you manage to read this?
https://patchwork.kernel.org/cover/11119607/
Could you please advice on how to do this properly?
>
> > + specified, it marks the port as recipient of even-pixels.
> > +
> > + dual-lvds-odd-pixels:
> > + type: boolean
> > + description:
> > + This property is specific to an input port of a sink device. When
> > + specified, it marks the port as recipient of odd-pixels.
>
> However, I don't think you even need these. A panel's port numbers are
> fixed can imply even or odd. For example port@0 can be even and port@1
> can be odd. The port numbering is typically panel specific, but we may
> be able to define the numbering generically if we don't already have
> panels with multiple ports.
>
> Also, aren't there dual link DSI panels?
This is the result of a discussion on here:
https://patchwork.kernel.org/patch/11095547/
Have you come across it?
Thanks!
Fab
>
> Rob
Powered by blists - more mailing lists