[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1567150854-30033-7-git-send-email-chunfeng.yun@mediatek.com>
Date: Fri, 30 Aug 2019 15:40:53 +0800
From: Chunfeng Yun <chunfeng.yun@...iatek.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh+dt@...nel.org>
CC: Mark Rutland <mark.rutland@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
Mathias Nyman <mathias.nyman@...el.com>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
<linux-usb@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH v3 6/7] arm64: dts: mt8183: enable USB remote wakeup
Enable USB remote wakeup for MT8183
Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
---
v3: remove '#reset-cells'
v2: no changes
---
arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 1 +
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 7 +++++++
2 files changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index 142ff52f0f42..077256f3397b 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -150,6 +150,7 @@
&ssusb {
vusb33-supply = <&mt6358_vusb_reg>;
dr_mode = "host";
+ wakeup-source;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 28da334237c6..dc3e859849c7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -215,6 +215,12 @@
#clock-cells = <1>;
};
+ pericfg: syscon@...03000 {
+ compatible = "mediatek,mt8183-pericfg", "syscon";
+ reg = <0 0x10003000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
pio: pinctrl@...05000 {
compatible = "mediatek,mt8183-pinctrl";
reg = <0 0x10005000 0 0x1000>,
@@ -384,6 +390,7 @@
clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
<&infracfg CLK_INFRA_USB>;
clock-names = "sys_ck", "ref_ck";
+ mediatek,syscon-wakeup = <&pericfg 0x400 0>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
--
2.23.0
Powered by blists - more mailing lists