[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <HE1PR06MB4011FA45247F186BB83DFF04ACBF0@HE1PR06MB4011.eurprd06.prod.outlook.com>
Date: Sun, 1 Sep 2019 10:03:53 +0000
From: Jonas Karlman <jonas@...boo.se>
To: Cheng-Yi Chiang <cychiang@...omium.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC: "alsa-devel@...a-project.org" <alsa-devel@...a-project.org>,
"tzungbi@...omium.org" <tzungbi@...omium.org>,
"zhengxing@...k-chips.com" <zhengxing@...k-chips.com>,
"kuninori.morimoto.gx@...esas.com" <kuninori.morimoto.gx@...esas.com>,
"a.hajda@...sung.com" <a.hajda@...sung.com>,
"airlied@...ux.ie" <airlied@...ux.ie>,
"jeffy.chen@...k-chips.com" <jeffy.chen@...k-chips.com>,
"dianders@...omium.org" <dianders@...omium.org>,
"dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
"cain.cai@...k-chips.com" <cain.cai@...k-chips.com>,
"linux-rockchip@...ts.infradead.org"
<linux-rockchip@...ts.infradead.org>,
"eddie.cai@...k-chips.com" <eddie.cai@...k-chips.com>,
"Laurent.pinchart@...asonboard.com"
<Laurent.pinchart@...asonboard.com>,
"daniel@...ll.ch" <daniel@...ll.ch>,
"enric.balletbo@...labora.com" <enric.balletbo@...labora.com>,
"dgreid@...omium.org" <dgreid@...omium.org>,
"sam@...nborg.org" <sam@...nborg.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Neil Armstrong <narmstrong@...libre.com>,
Jernej Skrabec <jernej.skrabec@...l.net>
Subject: Re: [PATCH] drm: dw-hdmi-i2s: enable audio clock in audio_startup
On 2019-08-29 06:29, Cheng-Yi Chiang wrote:
> In the designware databook, the sequence of enabling audio clock and
> setting format is not clearly specified.
> Currently, audio clock is enabled in the end of hw_param ops after
> setting format.
>
> On some monitors, there is a possibility that audio does not come out.
> Fix this by enabling audio clock in audio_startup ops
> before hw_param ops setting format.
>
> Signed-off-by: Cheng-Yi Chiang <cychiang@...omium.org>
> ---
> drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> index 5cbb71a866d5..08b4adbb1ddc 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> @@ -69,6 +69,14 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
> hdmi_write(audio, conf0, HDMI_AUD_CONF0);
> hdmi_write(audio, conf1, HDMI_AUD_CONF1);
>
> + return 0;
> +}
> +
> +static int dw_hdmi_i2s_audio_startup(struct device *dev, void *data)
> +{
> + struct dw_hdmi_i2s_audio_data *audio = data;
> + struct dw_hdmi *hdmi = audio->hdmi;
> +
> dw_hdmi_audio_enable(hdmi);
>
> return 0;
> @@ -105,6 +113,7 @@ static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
> }
>
> static struct hdmi_codec_ops dw_hdmi_i2s_ops = {
> + .audio_startup = dw_hdmi_i2s_audio_startup,
A small white space nit, there should be a tab and not space to align the equal sign above.
Also this patch do not cleanly apply to drm-misc-next or linux-next after
fc1ca6e01d0a "drm/bridge: dw-hdmi-i2s: add .get_eld support" was merged.
This patch does fix an issue I have observed on my Rockchip devices where audio would not always
came out after switching between audio streams having different rate and channels parameters.
I used to carry [1] to fix that issue, but this seems like a more sane fix.
[1] https://github.com/Kwiboo/linux-rockchip/commit/4862e4044532b8b480fa3a0faddc197586623808
With above fixed,
Reviewed-by: Jonas Karlman <jonas@...boo.se>
Regards,
Jonas
> .hw_params = dw_hdmi_i2s_hw_params,
> .audio_shutdown = dw_hdmi_i2s_audio_shutdown,
> .get_dai_id = dw_hdmi_i2s_get_dai_id,
Powered by blists - more mailing lists