linux-kernel - Re: [PATCH] ARM: dts: stm32: move ltdc pinctrl on stm32mp157a dk1 board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <50695b37-df51-08d6-a11e-99f9349aa481@st.com>
Date:   Mon, 2 Sep 2019 08:45:18 +0000
From:   Philippe CORNU <philippe.cornu@...com>
To:     Yannick FERTRE <yannick.fertre@...com>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Alexandre TORGUE <alexandre.torgue@...com>,
        "Rob Herring" <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        "linux-stm32@...md-mailman.stormreply.com" 
        <linux-stm32@...md-mailman.stormreply.com>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Benjamin GAIGNARD <benjamin.gaignard@...com>,
        Fabrice GASNIER <fabrice.gasnier@...com>
Subject: Re: [PATCH] ARM: dts: stm32: move ltdc pinctrl on stm32mp157a dk1
 board

Hi Yannick,

On 8/2/19 4:08 PM, Yannick Fertré wrote:
> The ltdc pinctrl must be in the display controller node and
> not in the peripheral node (hdmi bridge).
> 
> Signed-off-by: Yannick Fertré <yannick.fertre@...com>
> ---
>   arch/arm/boot/dts/stm32mp157a-dk1.dts | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
> index f3f0e37..1285cfc 100644
> --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
> +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
> @@ -99,9 +99,6 @@
>   		reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
>   		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
>   		interrupt-parent = <&gpiog>;
> -		pinctrl-names = "default", "sleep";
> -		pinctrl-0 = <&ltdc_pins_a>;
> -		pinctrl-1 = <&ltdc_pins_sleep_a>;
>   		status = "okay";
>   
>   		ports {
> @@ -276,6 +273,9 @@
>   };
>   
>   &ltdc {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&ltdc_pins_a>;
> +	pinctrl-1 = <&ltdc_pins_sleep_a>;

Reviewed-by: Philippe Cornu <philippe.cornu@...com>

Thanks
Philippe :)

>   	status = "okay";
>   
>   	port {
>