linux-kernel - [PATCH v4 2/9] dt-bindings: i2c: add bindings for i2c analog and digital filter

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1567418773-2427-3-git-send-email-eugen.hristev@microchip.com>
Date:   Mon, 2 Sep 2019 10:12:00 +0000
From:   <Eugen.Hristev@...rochip.com>
To:     <wsa@...-dreams.de>, <peda@...ntia.se>, <mark.rutland@....com>,
        <Ludovic.Desroches@...rochip.com>, <linux-i2c@...r.kernel.org>,
        <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <pierre-yves.mordret@...com>,
        <alexandre.belloni@...tlin.com>, <robh+dt@...nel.org>
CC:     <Nicolas.Ferre@...rochip.com>, <Eugen.Hristev@...rochip.com>
Subject: [PATCH v4 2/9] dt-bindings: i2c: add bindings for i2c analog and
 digital filter

From: Eugen Hristev <eugen.hristev@...rochip.com>

Some i2c controllers have a built-in digital or analog filter.
This is specifically required depending on the hardware PCB/board.
Some controllers also allow specifying the maximum width of the
spikes that can be filtered. The width length can be specified in nanoseconds.

Signed-off-by: Eugen Hristev <eugen.hristev@...rochip.com>
---
 Documentation/devicetree/bindings/i2c/i2c.txt | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
index 44efafd..8dbff67 100644
--- a/Documentation/devicetree/bindings/i2c/i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c.txt
@@ -55,6 +55,17 @@ wants to support one of the below features, it should adapt the bindings below.
 	Number of nanoseconds the SDA signal takes to fall; t(f) in the I2C
 	specification.
 
+- i2c-analog-filter
+	Enable analog filter for i2c lines.
+
+- i2c-digital-filter
+	Enable digital filter for i2c lines.
+
+- i2c-filter-width-ns
+	Width of spikes which can be filtered by either digital or analog
+	filters (i2c-analog-filtr or i2c-digital-filtr). This width is specified
+	in nanoseconds.
+
 - interrupts
 	interrupts used by the device.
 
-- 
2.7.4