| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <d0dc1623ed6b1bd657f169dc2b4482b269bdba37.1567421751.git.hns@goldelico.com>
Date: Mon, 2 Sep 2019 12:55:48 +0200
From: "H. Nikolaus Schaller" <hns@...delico.com>
To: Benoît Cousson <bcousson@...libre.com>,
Tony Lindgren <tony@...mide.com>,
Rob Herring <robh+dt@...nel.org>,
Adam Ford <aford173@...il.com>,
André Roth <neolynx@...il.com>,
Mark Rutland <mark.rutland@....com>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Viresh Kumar <viresh.kumar@...aro.org>
Cc: linux-omap@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
letux-kernel@...nphoenux.org, kernel@...a-handheld.com,
"H. Nikolaus Schaller" <hns@...delico.com>
Subject: [RFC 2/5] ARM: dts: add support for opp-v2 for omap34xx and omap36xx
In addition, move omap3 from whitelist to blacklist in cpufreq-dt-platdev
in the same patch, because doing either first breaks operation and
may make trouble in bisect.
Signed-off-by: H. Nikolaus Schaller <hns@...delico.com>
---
arch/arm/boot/dts/omap34xx.dtsi | 59 +++++++++++++++++++++++-----
arch/arm/boot/dts/omap36xx.dtsi | 47 ++++++++++++++++++----
drivers/cpufreq/cpufreq-dt-platdev.c | 2 +-
3 files changed, 90 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index f572a477f74c..b92645d6d981 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -16,19 +16,60 @@
/ {
cpus {
cpu: cpu@0 {
- /* OMAP343x/OMAP35xx variants OPP1-5 */
- operating-points = <
- /* kHz uV */
- 125000 975000
- 250000 1075000
- 500000 1200000
- 550000 1270000
- 600000 1350000
- >;
+ /* OMAP343x/OMAP35xx variants OPP1-6 */
+ operating-points-v2 = <&cpu0_opp_table>;
+
clock-latency = <300000>; /* From legacy driver */
};
};
+ /* see Documentation/devicetree/bindings/opp/opp.txt */
+ cpu0_opp_table: opp-table {
+ compatible = "operating-points-v2-ti-cpu";
+ syscon = <&scm_conf>;
+
+ opp1-125000000 {
+ opp-hz = /bits/ 64 <125000000>;
+ // we currently only select the max voltage from table Table 3-3 of the omap3530 Data sheet (SPRS507F)
+ // <target min max> could also be single <target>
+ opp-microvolt = <975000 975000 975000>;
+ // first value is silicon revision, second one 720MHz Device Identification
+ opp-supported-hw = <0xffffffff 3>;
+ };
+
+ opp2-250000000 {
+ opp-hz = /bits/ 64 <250000000>;
+ opp-microvolt = <1075000 1075000 1075000>;
+ opp-supported-hw = <0xffffffff 3>;
+ opp-suspend;
+ };
+
+ opp3-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <1200000 1200000 1200000>;
+ opp-supported-hw = <0xffffffff 3>;
+ };
+
+ opp4-550000000 {
+ opp-hz = /bits/ 64 <550000000>;
+ opp-microvolt = <1270000 1270000 1270000>;
+ opp-supported-hw = <0xffffffff 3>;
+ };
+
+ opp5-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1350000 1350000 1350000>;
+ opp-supported-hw = <0xffffffff 3>;
+ };
+
+ opp6-720000000 {
+ opp-hz = /bits/ 64 <720000000>;
+ opp-microvolt = <1350000 1350000 1350000>;
+ /* only high-speed grade omap3530 devices */
+ opp-supported-hw = <0xffffffff 2>;
+ };
+ };
+
ocp@...00000 {
omap3_pmx_core2: pinmux@...025d8 {
compatible = "ti,omap3-padconf", "pinctrl-single";
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 6fb23ada1f64..1595814585df 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -19,15 +19,46 @@
};
cpus {
- /* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */
+ /* OMAP3630/OMAP37xx variants OPP50 to OPP130 and OPP1G */
cpu: cpu@0 {
- operating-points = <
- /* kHz uV */
- 300000 1012500
- 600000 1200000
- 800000 1325000
- >;
- clock-latency = <300000>; /* From legacy driver */
+ operating-points-v2 = <&cpu0_opp_table>;
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
+ };
+ };
+
+ /* see Documentation/devicetree/bindings/opp/opp.txt */
+ cpu0_opp_table: opp-table {
+ compatible = "operating-points-v2-ti-cpu";
+ syscon = <&scm_conf>;
+
+ opp50-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ // we currently only select the max voltage from table Table 4-19 of the DM3730 Data sheet (SPRS685B)
+ // <target min max> could also be single <target>
+ opp-microvolt = <1012500 1012500 1012500>;
+ // first value is silicon revision, second one is "speed binned
+ opp-supported-hw = <0xffffffff 3>;
+ opp-suspend;
+ };
+
+ opp100-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1200000 1200000 1200000>;
+ opp-supported-hw = <0xffffffff 3>;
+ };
+
+ opp130-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1325000 1325000 1325000>;
+ opp-supported-hw = <0xffffffff 3>;
+ };
+
+ opp1g-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1375000 1375000 1375000>;
+ /* only on am/dm37x with speed-binned bit set */
+ opp-supported-hw = <0xffffffff 2>;
};
};
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 03dc4244ab00..68b7fc4225f8 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -86,7 +86,6 @@ static const struct of_device_id whitelist[] __initconst = {
{ .compatible = "st-ericsson,u9540", },
{ .compatible = "ti,omap2", },
- { .compatible = "ti,omap3", },
{ .compatible = "ti,omap4", },
{ .compatible = "ti,omap5", },
@@ -132,6 +131,7 @@ static const struct of_device_id blacklist[] __initconst = {
{ .compatible = "ti,am33xx", },
{ .compatible = "ti,am43", },
{ .compatible = "ti,dra7", },
+ { .compatible = "ti,omap3", },
{ }
};
--
2.19.1
Powered by blists - more mailing lists