Message-ID: <20190902140323.fgfrifyow5qgoce4@core.my.home>
Date:   Mon, 2 Sep 2019 16:03:23 +0200
From:   Ondřej Jirman <megous@...ous.com>
To:     Chen-Yu Tsai <wens@...e.org>
Cc:     Maxime Ripard <maxime.ripard@...tlin.com>,
        devicetree@...r.kernel.org,
        Sergey Matyukevich <geomatsi@...il.com>,
        Andre Przywara <andre.przywara@....com>,
        linux-kernel@...r.kernel.org, Emmanuel Vadot <manu@...ebsd.org>,
        linux-sunxi@...glegroups.com,
        Jagan Teki <jagan@...rulasolutions.com>,
        Hauke Mehrtens <hauke@...ke-m.de>,
        linux-arm-kernel@...ts.infradead.org,
        Icenowy Zheng <icenowy@...c.io>
Subject: Re: [PATCH 00/10] arm64: dts: allwinner: h5: Enable CPU DVFS
 (cpufreq)

Hi,

On Wed, Jan 30, 2019 at 04:41:53PM +0800, Chen-Yu Tsai wrote:
> Hi everyone,
> 
> This series enables DVFS for the CPU cores (aka cpufreq) on the
> Allwinner H5 SoC. The OPP table was taken from Armbian, with minor
> tweaks to the maximum voltage to account for slightly increased voltage
> on some of the boards.
> 
> This has been tested on the Bananapi M2+ v1.2 and Libre Computer
> ALL-H3-CC H5 ver..  I do not have the remaining boards so I've CC-ed
> people who did the original submission or have modified the board
> specifically later on.
> 
> Patch 1 fixes the voltages specified for the GPIO-controlled regulator
> on the Bananapi M2+ v1.2. The voltages are slightly higher than what
> was originally written.
> 
> Patch 2 adds a fixed regulator for the CPU on the original Bananapi M2+.
> This is for the retail version, not the engineering samples that had an
> even higher voltage setting.
> 
> Patch 3 hooks up the CPU regulator supply for H5 boards that already
> define the regulator, but were missing the property to tie it to the
> CPUs.
> 
> Patch 4 ~ 8 adds the CPU regulator for boards that don't have it
> defined. This is based on each vendor's schematics. I need people
> to test each of these specifically and the whole series.
> 
> Patch 9 ties the CPU clock to the CPU cores.
> 
> Patch 10 adds the OPP table, based on the one from Armbian.
> 
> Please have a look and please help test this.

Looks like this patch series got forgotten. Or is it waiting for some
user testing?

regards,
	o.

> 
> Regards
> ChenYu
> 
> 
> Chen-Yu Tsai (10):
>   ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages
>   ARM: dts: bananapi-m2-plus: Add CPU supply regulator
>   arm64: dts: allwinner: h5: Hook up cpu regulator supplies
>   arm64: dts: allwinner: h5: nanopi-neo2: Add CPU regulator supply
>   arm64: dts: allwinner: h5: orange-pi-zero-plus: Add CPU regulator
>     supply
>   arm64: dts: allwinner: h5: orange-pi-zero-plus2: Add CPU regulator
>     supply
>   arm64: dts: allwinner: h5: orange-pi-pc2: Add CPU regulator supply
>   arm64: dts: allwinner: h5: orange-pi-prime: Add CPU regulator supply
>   arm64: dts: allwinner: h5: Add clock to CPU cores
>   arm64: dts: allwinner: h5: Add CPU Operating Performance Points table
> 
>  .../boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi | 30 +++-----
>  arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi | 14 ++++
>  .../sun50i-h5-emlid-neutis-n5-devboard.dts    |  4 +
>  .../allwinner/sun50i-h5-nanopi-neo-plus2.dts  |  4 +
>  .../dts/allwinner/sun50i-h5-nanopi-neo2.dts   | 20 +++++
>  .../dts/allwinner/sun50i-h5-orangepi-pc2.dts  | 28 +++++++
>  .../allwinner/sun50i-h5-orangepi-prime.dts    | 28 +++++++
>  .../sun50i-h5-orangepi-zero-plus.dts          | 20 +++++
>  .../sun50i-h5-orangepi-zero-plus2.dts         | 20 +++++
>  arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi  | 75 +++++++++++++++++++
>  10 files changed, 224 insertions(+), 19 deletions(-)
> 
> -- 
> 2.20.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Powered by blists - more mailing lists