lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CANAwSgRVkJXNckcNELKhj4R_Lex62WJn3K4ct1wkuocMjfWAAg@mail.gmail.com>
Date:   Mon, 2 Sep 2019 06:48:06 +0530
From:   Anand Moon <linux.amoon@...il.com>
To:     Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Cc:     Rob Herring <robh+dt@...nel.org>,
        Jerome Brunet <jbrunet@...libre.com>,
        Neil Armstrong <narmstrong@...libre.com>,
        Kevin Hilman <khilman@...libre.com>,
        devicetree <devicetree@...r.kernel.org>,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
        linux-amlogic@...ts.infradead.org,
        Linux Kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCHv1 1/3] arm64: dts: meson: odroid-c2: Add missing regulator
 linked to P5V0 regulator

Hi Martin,

On Mon, 2 Sep 2019 at 03:23, Martin Blumenstingl
<martin.blumenstingl@...glemail.com> wrote:
>
> Hi Anand,
>
> On Sun, Sep 1, 2019 at 3:58 PM Anand Moon <linux.amoon@...il.com> wrote:
> >
> > Hi Martin,
> >
> > Thanks for your review comments.
> >
> > Their have been some revision changes in S905 Odroid Schematics.
> > [0] https://dn.odroid.com/S905/Schematic/
> >
> > Well I have make my changes based on old odroid-c2_rev0.2_20151218.pdf
>
> [...]
> > >
> > > according to the schematics there's both:
> > > - VDDIO_AO3V3
> > > - VCC3V3 (which is turned on by VDDIO_AO3V3, see [0])
> > >
> >
> > From the schematics it seams same.
> >
> > VDDIO_AO3V3---DMG340LSQN4 (Q4)---VCC3V3
> yes, they are the same signal. the only difference is that VCC3V3 is
> turned on later in the power-up sequence
>
> > But this name change was done to link TFLASH_VDD_EN to TFLASH_VDD for eMMC
> >
> > VDDIO_AO3V3-----TFLASH_VDD using  TFLASH_VDD_EN gpio pin.
> >
> > Well I have tested this changes on eMMC module.
> I cannot see any of the TFLASH_* regulators being linked to eMMC (they
> are only linked to the SD card slot, I also checked
> odroid-c2_rev0.2_20151218.pdf and odroid-c2_rev0.2_20171114.pdf).
> which page of the odroid-c2_rev0.2_20151218.pdf schematics shows how
> TFLASH_VDD is linked to eMMC?
>
> please note that I don't have an Odroid-C2 board myself (so I cannot
> test any of this).
>
>
> Martin

Thanks I will double check again and re-post then with correction again.

Best Regards
-Anand

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ