[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20190903174844.GA4044@bogus>
Date: Tue, 3 Sep 2019 18:48:44 +0100
From: Rob Herring <robh@...nel.org>
To: allen <allen.chen@....com.tw>
Cc: Pi-Hsun Shih <pihsun@...omium.org>,
Jau-Chih Tseng <Jau-Chih.Tseng@....com.tw>,
David Airlie <airlied@...ux.ie>,
Mark Rutland <mark.rutland@....com>,
CK Hu <ck.hu@...iatek.com>,
Eddie Huang <eddie.huang@...iatek.com>,
"open list:DRM DRIVERS" <dri-devel@...ts.freedesktop.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 1/2] dt-bindings: Add binding for IT6505.
On Tue, Sep 03, 2019 at 06:51:53PM +0800, allen wrote:
> From: Allen Chen <allen.chen@....com.tw>
>
> Add a DT binding documentation for IT6505.
>
> Signed-off-by: Allen Chen <allen.chen@....com.tw>
>
> ---
> Comments in v1 would be addressed later in v3.
> ---
> .../bindings/display/bridge/ite,it6505.txt | 30 ++++++++++++++++++++++
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> 2 files changed, 31 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6505.txt
This won't apply. Base your patches on current (latest -rc) kernels.
We've moved to a DT schema format. Minimally vendor-prefixes.txt will
have to change. It's also preferred for display bridges.
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt b/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt
> new file mode 100644
> index 0000000..c3506ac
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.txt
> @@ -0,0 +1,30 @@
> +iTE it6505 DP bridge bindings
> +
> +Required properties:
> + - compatible: "ite,it6505"
> + - reg: i2c address of the bridge
> + - ovdd-supply: I/O voltage
> + - pwr18-supply: Core voltage
> + - interrupts: interrupt specifier of INT pin
> + - reset-gpios: gpio specifier of RESET pin
> +
> +Example:
> + it6505dptx: it6505dptx@5c {
dp-bridge@5c
> + compatible = "ite,it6505";
> + status = "okay";
Don't show status in examples.
> + interrupt-parent = <&pio>;
And interrupt-parent.
> + interrupts = <152 IRQ_TYPE_EDGE_RISING 152 0>;
> + reg = <0x5c>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&it6505_pins>;
> + ovdd-supply = <&mt6358_vsim1_reg>;
> + pwr18-supply = <&it6505_pp18_reg>;
> + reset-gpios = <&pio 179 1>;
> + hpd-gpios = <&pio 9 0>;
This goes in a connector node.
> + extcon = <&usbc_extcon>;
extcon is deprecated. Drop or use the usb-connector binding.
Plus this is not documented above.
> + port {
Need to list what each port is. You're going to need an output port too
for a dp-connector or usb-c connector.
> + it6505_in: endpoint {
> + remote-endpoint = <&dpi_out>;
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index 2c3fc51..c088646 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -184,6 +184,7 @@ iom Iomega Corporation
> isee ISEE 2007 S.L.
> isil Intersil
> issi Integrated Silicon Solutions Inc.
> +ite iTE Tech. Inc.
> itead ITEAD Intelligent Systems Co.Ltd
> iwave iWave Systems Technologies Pvt. Ltd.
> jdi Japan Display Inc.
> --
> 1.9.1
>
Powered by blists - more mailing lists