[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190904162322.17542-1-alexandru.ardelean@analog.com>
Date: Wed, 4 Sep 2019 19:23:20 +0300
From: Alexandru Ardelean <alexandru.ardelean@...log.com>
To: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <andrew@...n.ch>, <f.fainelli@...il.com>, <hkallweit1@...il.com>,
<davem@...emloft.net>,
Alexandru Ardelean <alexandru.ardelean@...log.com>
Subject: [PATCH v2 0/2] ethtool: implement Energy Detect Powerdown support via phy-tunable
This changeset proposes a new control for PHY tunable to control Energy
Detect Power Down.
The `phy_tunable_id` has been named `ETHTOOL_PHY_EDPD` since it looks like
this feature is common across other PHYs (like EEE), and defining
`ETHTOOL_PHY_ENERGY_DETECT_POWER_DOWN` seems too long.
The way EDPD works, is that the RX block is put to a lower power mode,
except for link-pulse detection circuits. The TX block is also put to low
power mode, but the PHY wakes-up periodically to send link pulses, to avoid
lock-ups in case the other side is also in EDPD mode.
Currently, there are 2 PHY drivers that look like they could use this new
PHY tunable feature: the `adin` && `micrel` PHYs.
This series updates only the `adin` PHY driver to support this new feature,
as this chip has been tested. A change for `micrel` can be proposed after a
discussion of the PHY-tunable API is resolved.
Alexandru Ardelean (2):
ethtool: implement Energy Detect Powerdown support via phy-tunable
net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable
drivers/net/phy/adin.c | 50 ++++++++++++++++++++++++++++++++++++
include/uapi/linux/ethtool.h | 5 ++++
net/core/ethtool.c | 6 +++++
3 files changed, 61 insertions(+)
Changelog v1 -> v2:
* initial series was made up of 2 sub-series: 1 for kernel & 1 for ethtool
in userspace; v2 contains only the kernel series
--
2.20.1
Powered by blists - more mailing lists