linux-kernel - [PATCH AUTOSEL 5.2 09/94] arm64: dts: meson-g12a: add missing dwc2 phy-names

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190904155739.2816-9-sashal@kernel.org>
Date:   Wed,  4 Sep 2019 11:56:14 -0400
From:   Sasha Levin <sashal@...nel.org>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:     Neil Armstrong <narmstrong@...libre.com>,
        Kevin Hilman <khilman@...libre.com>,
        Sasha Levin <sashal@...nel.org>, devicetree@...r.kernel.org,
        linux-amlogic@...ts.infradead.org
Subject: [PATCH AUTOSEL 5.2 09/94] arm64: dts: meson-g12a: add missing dwc2 phy-names

From: Neil Armstrong <narmstrong@...libre.com>

[ Upstream commit 3d4bacdc207a7b62941700b374e7199cbb184a43 ]

The G12A USB2 OTG capable PHY uses a 8bit large UTMI bus, and the OTG
controller gets the PHY but width by probing the associated phy.

By default it will use 16bit wide settings if a phy is not specified,
in our case we specified the phy, but not the phy-names.

The dwc2 bindings specifies that if phys is present, phy-names shall be
"usb2-phy".

Adding phy-names = "usb2-phy" solves the OTG PHY bus configuration.

Fixes: 9baf7d6be730 ("arm64: dts: meson: g12a: Add G12A USB nodes")
Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
Signed-off-by: Kevin Hilman <khilman@...libre.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 9f72396ba7103..4c92c197aeb8a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -591,6 +591,7 @@
 				clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
 				clock-names = "ddr";
 				phys = <&usb2_phy1>;
+				phy-names = "usb2-phy";
 				dr_mode = "peripheral";
 				g-rx-fifo-size = <192>;
 				g-np-tx-fifo-size = <128>;
-- 
2.20.1