linux-kernel - [PATCH V6 0/3] mmc: mmci: add busy detect for stm32 sdmmc variant

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190905122112.29672-1-ludovic.Barre@st.com>
Date:   Thu, 5 Sep 2019 14:21:09 +0200
From:   Ludovic Barre <ludovic.Barre@...com>
To:     Ulf Hansson <ulf.hansson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>
CC:     <srinivas.kandagatla@...aro.org>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Alexandre Torgue <alexandre.torgue@...com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-mmc@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        Ludovic Barre <ludovic.barre@...com>
Subject: [PATCH V6 0/3] mmc: mmci: add busy detect for stm32 sdmmc variant

From: Ludovic Barre <ludovic.barre@...com>

This patch series adds busy detect for stm32 sdmmc variant.
Some adaptations are required:
-On sdmmc the data timer is started on data transfert
and busy state, so we must add hardware busy timeout support.
-Add busy_complete callback at mmci_host_ops to allow to define
a specific busy completion by variant.
-Add sdmmc busy_complete callback.

V6:
-mmci_start_command: set datatimer only on rsp_busy flag
(remove host->mrq->data).
-move max_busy_timeout in set_ios callback.
-typo fix: err_msk, clks on one lines.

V5:
-Replaces !cmd->data to !host->mrq->data to avoid overwrite
 of datatimer register by the first command (cmd23, without data) of
 SBC request.

V4:
-Re-work with busy_complete callback
-In series, move "mmc: mmci: add hardware busy timeout feature" in
first to simplify busy_complete prototype with err_msk parameter.

V3:
-rebase on latest mmc next
-replace re-read by status parameter. 

V2:
-mmci_cmd_irq cleanup in separate patch.
-simplify the busy_detect_flag exclude
-replace sdmmc specific comment in
"mmc: mmci: avoid fake busy polling in mmci_irq"
to focus on common behavior

Ludovic Barre (3):
  mmc: mmci: add hardware busy timeout feature
  mmc: mmci: add busy_complete callback
  mmc: mmci: sdmmc: add busy_complete callback

 drivers/mmc/host/mmci.c             | 183 +++++++++++++++++-----------
 drivers/mmc/host/mmci.h             |   7 +-
 drivers/mmc/host/mmci_stm32_sdmmc.c |  38 ++++++
 3 files changed, 156 insertions(+), 72 deletions(-)

-- 
2.17.1