linux-kernel - [PATCH] staging: olpc_dcon: allow simultaneous XO-1 and XO-1.5 support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <20190906010613.GA562@compute1>
Date:   Fri, 6 Sep 2019 09:06:14 +0800
From:   Jerry Lin <wahahab11@...il.com>
To:     Jens Frederich <jfrederich@...il.com>,
        Daniel Drake <dsd@...top.org>,
        Jon Nettleton <jon.nettleton@...il.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
        Jerry Lin <wahahab11@...il.com>
Subject: [PATCH] staging: olpc_dcon: allow simultaneous XO-1 and XO-1.5
 support

This patch remove model related configuration.
Since the module can decide which platform data to use itself base on
current running olpc board.

Also change module dependency from (GPIO_CS5535 || GPIO_CS5535=n)
to (GPIO_CS5535 || ACPI) because original one does not make any sense
and module only doing real work when GPIO_CS5535 or ACPI is setted.

Remove kernel configurations:
- FB_OLPC_DCON_1
- FB_OLPC_DCON_1_5

Signed-off-by: Jerry Lin <wahahab11@...il.com>
---
 drivers/staging/olpc_dcon/Kconfig     | 21 +--------------------
 drivers/staging/olpc_dcon/Makefile    |  4 +---
 drivers/staging/olpc_dcon/TODO        |  1 -
 drivers/staging/olpc_dcon/olpc_dcon.c |  6 +-----
 drivers/staging/olpc_dcon/olpc_dcon.h |  5 -----
 5 files changed, 3 insertions(+), 34 deletions(-)

diff --git a/drivers/staging/olpc_dcon/Kconfig b/drivers/staging/olpc_dcon/Kconfig
index f5c716b..4ae271f 100644
--- a/drivers/staging/olpc_dcon/Kconfig
+++ b/drivers/staging/olpc_dcon/Kconfig
@@ -3,7 +3,7 @@ config FB_OLPC_DCON
 	tristate "One Laptop Per Child Display CONtroller support"
 	depends on OLPC && FB
 	depends on I2C
-	depends on (GPIO_CS5535 || GPIO_CS5535=n)
+	depends on (GPIO_CS5535 || ACPI)
 	select BACKLIGHT_CLASS_DEVICE
 	help
 	  In order to support very low power operation, the XO laptop uses a
@@ -15,22 +15,3 @@ config FB_OLPC_DCON
 	  This controller is only available on OLPC platforms.  Unless you have
 	  one of these platforms, you will want to say 'N'.
 
-config FB_OLPC_DCON_1
-	bool "OLPC XO-1 DCON support"
-	depends on FB_OLPC_DCON && GPIO_CS5535
-	default y
-	help
-	  Enable support for the DCON in XO-1 model laptops.  The kernel
-	  communicates with the DCON using model-specific code.  If you
-	  have an XO-1 (or if you're unsure what model you have), you should
-	  say 'Y'.
-
-config FB_OLPC_DCON_1_5
-	bool "OLPC XO-1.5 DCON support"
-	depends on FB_OLPC_DCON && ACPI
-	default y
-	help
-	  Enable support for the DCON in XO-1.5 model laptops.  The kernel
-	  communicates with the DCON using model-specific code.  If you
-	  have an XO-1.5 (or if you're unsure what model you have), you
-	  should say 'Y'.
diff --git a/drivers/staging/olpc_dcon/Makefile b/drivers/staging/olpc_dcon/Makefile
index cb1248c..734b2ce 100644
--- a/drivers/staging/olpc_dcon/Makefile
+++ b/drivers/staging/olpc_dcon/Makefile
@@ -1,7 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-olpc-dcon-objs += olpc_dcon.o
-olpc-dcon-$(CONFIG_FB_OLPC_DCON_1)	+= olpc_dcon_xo_1.o
-olpc-dcon-$(CONFIG_FB_OLPC_DCON_1_5)	+= olpc_dcon_xo_1_5.o
+olpc-dcon-objs += olpc_dcon.o olpc_dcon_xo_1.o olpc_dcon_xo_1_5.o
 obj-$(CONFIG_FB_OLPC_DCON)	+= olpc-dcon.o
 
 
diff --git a/drivers/staging/olpc_dcon/TODO b/drivers/staging/olpc_dcon/TODO
index d8296f2..7c26335 100644
--- a/drivers/staging/olpc_dcon/TODO
+++ b/drivers/staging/olpc_dcon/TODO
@@ -8,7 +8,6 @@ TODO:
 	  internals, but isn't properly integrated, is not the correct solution.
 	- see if vx855 gpio API can be made similar enough to cs5535 so we can
 	  share more code
-	- allow simultaneous XO-1 and XO-1.5 support
 
 Please send patches to Greg Kroah-Hartman <greg@...ah.com> and
 copy:
diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c
index a254238..a0d6d90 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon.c
@@ -790,15 +790,11 @@ static struct i2c_driver dcon_driver = {
 
 static int __init olpc_dcon_init(void)
 {
-#ifdef CONFIG_FB_OLPC_DCON_1_5
 	/* XO-1.5 */
 	if (olpc_board_at_least(olpc_board(0xd0)))
 		pdata = &dcon_pdata_xo_1_5;
-#endif
-#ifdef CONFIG_FB_OLPC_DCON_1
-	if (!pdata)
+	else
 		pdata = &dcon_pdata_xo_1;
-#endif
 
 	return i2c_add_driver(&dcon_driver);
 }
diff --git a/drivers/staging/olpc_dcon/olpc_dcon.h b/drivers/staging/olpc_dcon/olpc_dcon.h
index 22d976a..41bd136 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon.h
+++ b/drivers/staging/olpc_dcon/olpc_dcon.h
@@ -106,12 +106,7 @@ struct dcon_gpio {
 
 irqreturn_t dcon_interrupt(int irq, void *id);
 
-#ifdef CONFIG_FB_OLPC_DCON_1
 extern struct dcon_platform_data dcon_pdata_xo_1;
-#endif
-
-#ifdef CONFIG_FB_OLPC_DCON_1_5
 extern struct dcon_platform_data dcon_pdata_xo_1_5;
-#endif
 
 #endif
-- 
2.7.4