| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 9 Sep 2019 08:32:06 -0500
From: Adam Ford <aford173@...il.com>
To: Andreas Kemnade <andreas@...nade.info>
Cc: Tony Lindgren <tony@...mide.com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Linux-OMAP <linux-omap@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-pm@...r.kernel.org, Stephen Boyd <sboyd@...nel.org>,
Nishanth Menon <nm@...com>, vireshk@...nel.org,
stable@...r.kernel.org
Subject: Re: [PATCH v2] regulator: twl: voltage lists for vdd1/2 on twl4030
On Thu, Aug 15, 2019 at 5:47 AM Adam Ford <aford173@...il.com> wrote:
>
> On Wed, Aug 14, 2019 at 5:18 PM Andreas Kemnade <andreas@...nade.info> wrote:
> >
> > _opp_supported_by_regulators() wrongly ignored errors from
> > regulator_is_supported_voltage(), so it considered errors as
> > success. Since
> > commit 498209445124 ("regulator: core: simplify return value on suported_voltage")
> > regulator_is_supported_voltage() returns a real boolean, so
> > errors make _opp_supported_by_regulators() return false.
> >
> > That reveals a problem with the declaration of the VDD1/2
> > regulators on twl4030.
> > The VDD1/VDD2 regulators on twl4030 are neither defined with
> > voltage lists nor with the continuous flag set, so
> > regulator_is_supported_voltage() returns false and an error
> > before above mentioned commit (which was considered success)
> > The result is that after the above mentioned commit cpufreq
> > does not work properly e.g. dm3730.
> >
> > [ 2.490997] core: _opp_supported_by_regulators: OPP minuV: 1012500 maxuV: 1012500, not supported by regulator
> > [ 2.501617] cpu cpu0: _opp_add: OPP not supported by regulators (300000000)
> > [ 2.509246] core: _opp_supported_by_regulators: OPP minuV: 1200000 maxuV: 1200000, not supported by regulator
> > [ 2.519775] cpu cpu0: _opp_add: OPP not supported by regulators (600000000)
> > [ 2.527313] core: _opp_supported_by_regulators: OPP minuV: 1325000 maxuV: 1325000, not supported by regulator
> > [ 2.537750] cpu cpu0: _opp_add: OPP not supported by regulators (800000000)
> >
> > The patch fixes declaration of VDD1/2 regulators by
> > adding proper voltage lists.
> >
> > Fixes: 498209445124 ("regulator: core: simplify return value on suported_voltage")
> > Cc: stable@...r.kernel.org
> > Signed-off-by: Andreas Kemnade <andreas@...nade.info>
>
> Tested-by: Adam Ford <aford173@...il.com> #logicpd-torpedo-37xx-devkit
>
I am not sure who the right maintainer is, but as of today, cpufreq
for users of twl4030 on 5.3-RC8 is still broken without this patch.
Is there any way it can be applied before the final release?
thank you,
adam
> > ---
> > resent because it was rejected by mailing lists, due to technical
> > issues, sorry for the noise.
> > changes in v2:
> > using a proper voltage list instead of misusing the continuous flag
> > subject was regulator: twl: mark vdd1/2 as continuous on twl4030
> >
> > drivers/regulator/twl-regulator.c | 23 ++++++++++++++++++++---
> > 1 file changed, 20 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
> > index 6fa15b2d6fb3..866b4dd01da9 100644
> > --- a/drivers/regulator/twl-regulator.c
> > +++ b/drivers/regulator/twl-regulator.c
> > @@ -359,6 +359,17 @@ static const u16 VINTANA2_VSEL_table[] = {
> > 2500, 2750,
> > };
> >
> > +/* 600mV to 1450mV in 12.5 mV steps */
> > +static const struct regulator_linear_range VDD1_ranges[] = {
> > + REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500)
> > +};
> > +
> > +/* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */
> > +static const struct regulator_linear_range VDD2_ranges[] = {
> > + REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500),
> > + REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500)
> > +};
> > +
> > static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
> > {
> > struct twlreg_info *info = rdev_get_drvdata(rdev);
> > @@ -427,6 +438,8 @@ static int twl4030smps_get_voltage(struct regulator_dev *rdev)
> > }
> >
> > static const struct regulator_ops twl4030smps_ops = {
> > + .list_voltage = regulator_list_voltage_linear_range,
> > +
> > .set_voltage = twl4030smps_set_voltage,
> > .get_voltage = twl4030smps_get_voltage,
> > };
> > @@ -466,7 +479,8 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
> > }, \
> > }
> >
> > -#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \
> > +#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf, \
> > + n_volt) \
> > static const struct twlreg_info TWL4030_INFO_##label = { \
> > .base = offset, \
> > .id = num, \
> > @@ -479,6 +493,9 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
> > .owner = THIS_MODULE, \
> > .enable_time = turnon_delay, \
> > .of_map_mode = twl4030reg_map_mode, \
> > + .n_voltages = n_volt, \
> > + .n_linear_ranges = ARRAY_SIZE(label ## _ranges), \
> > + .linear_ranges = label ## _ranges, \
> > }, \
> > }
> >
> > @@ -518,8 +535,8 @@ TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00);
> > TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08);
> > TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08);
> > TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08);
> > -TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08);
> > -TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08);
> > +TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08, 68);
> > +TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08, 69);
> > /* VUSBCP is managed *only* by the USB subchip */
> > TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08);
> > TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08);
> > --
> > 2.20.1
> >
Powered by blists - more mailing lists