| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 9 Sep 2019 08:43:13 -0500
From: Adam Ford <aford173@...il.com>
To: "H. Nikolaus Schaller" <hns@...delico.com>
Cc: Benoît Cousson <bcousson@...libre.com>,
Tony Lindgren <tony@...mide.com>,
Rob Herring <robh+dt@...nel.org>,
André Roth <neolynx@...il.com>,
Mark Rutland <mark.rutland@....com>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Viresh Kumar <viresh.kumar@...aro.org>,
Enric Balletbo i Serra <eballetbo@...il.com>,
Javier Martinez Canillas <javier@...hile0.org>,
Roger Quadros <rogerq@...com>,
Teresa Remmet <t.remmet@...tec.de>,
Linux-OMAP <linux-omap@...r.kernel.org>,
devicetree <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-pm@...r.kernel.org,
Discussions about the Letux Kernel
<letux-kernel@...nphoenux.org>, kernel@...a-handheld.com,
arm-soc <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 2/4] ARM: dts: replace opp-v1 tables by opp-v2 for
omap34xx and omap36xx
On Sat, Sep 7, 2019 at 12:47 PM H. Nikolaus Schaller <hns@...delico.com> wrote:
>
> In addition, move omap3 from whitelist to blacklist in cpufreq-dt-platdev
> in the same patch, because doing either first breaks operation and
> may make trouble in bisect.
>
> We also can remove opp-v1 table for omap3-n950-n9 since it is now
> automatically detected.
>
> We also fix a wrong OPP4 voltage for omap3430 which must be
> 0.6V + 54*12.5mV = 1275mV. Otherwise the twl4030 driver will reject
> this OPP.
>
thank you for your work on this. I tested it on a a Logit PD DM3730
Torpedo + Wireless kit, and appears to operate normally, but i have
not tested it at temperature.
Tested-by: Adam Ford <aford173@...il.com>
> Signed-off-by: H. Nikolaus Schaller <hns@...delico.com>
> Acked-by: Tony Lindgren <tony@...mide.com>
> ---
> arch/arm/boot/dts/omap3-n950-n9.dtsi | 7 ---
> arch/arm/boot/dts/omap34xx.dtsi | 65 ++++++++++++++++++++++++----
> arch/arm/boot/dts/omap36xx.dtsi | 53 +++++++++++++++++++----
> drivers/cpufreq/cpufreq-dt-platdev.c | 2 +-
> 4 files changed, 102 insertions(+), 25 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
> index 5441e9ffdbb4..e98b0c615f19 100644
> --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
> +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
> @@ -11,13 +11,6 @@
> cpus {
> cpu@0 {
> cpu0-supply = <&vcc>;
> - operating-points = <
> - /* kHz uV */
> - 300000 1012500
> - 600000 1200000
> - 800000 1325000
> - 1000000 1375000
> - >;
> };
> };
>
> diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
> index f572a477f74c..91154829f86a 100644
> --- a/arch/arm/boot/dts/omap34xx.dtsi
> +++ b/arch/arm/boot/dts/omap34xx.dtsi
> @@ -16,19 +16,66 @@
> / {
> cpus {
> cpu: cpu@0 {
> - /* OMAP343x/OMAP35xx variants OPP1-5 */
> - operating-points = <
> - /* kHz uV */
> - 125000 975000
> - 250000 1075000
> - 500000 1200000
> - 550000 1270000
> - 600000 1350000
> - >;
> + /* OMAP343x/OMAP35xx variants OPP1-6 */
> + operating-points-v2 = <&cpu0_opp_table>;
> +
> clock-latency = <300000>; /* From legacy driver */
> };
> };
>
> + /* see Documentation/devicetree/bindings/opp/opp.txt */
> + cpu0_opp_table: opp-table {
> + compatible = "operating-points-v2-ti-cpu";
> + syscon = <&scm_conf>;
> +
> + opp1-125000000 {
> + opp-hz = /bits/ 64 <125000000>;
> + /*
> + * we currently only select the max voltage from table
> + * Table 3-3 of the omap3530 Data sheet (SPRS507F).
> + * Format is: <target min max>
> + */
> + opp-microvolt = <975000 975000 975000>;
> + /*
> + * first value is silicon revision bit mask
> + * second one 720MHz Device Identification bit mask
> + */
> + opp-supported-hw = <0xffffffff 3>;
> + };
> +
> + opp2-250000000 {
> + opp-hz = /bits/ 64 <250000000>;
> + opp-microvolt = <1075000 1075000 1075000>;
> + opp-supported-hw = <0xffffffff 3>;
> + opp-suspend;
> + };
> +
> + opp3-500000000 {
> + opp-hz = /bits/ 64 <500000000>;
> + opp-microvolt = <1200000 1200000 1200000>;
> + opp-supported-hw = <0xffffffff 3>;
> + };
> +
> + opp4-550000000 {
> + opp-hz = /bits/ 64 <550000000>;
> + opp-microvolt = <1275000 1275000 1275000>;
> + opp-supported-hw = <0xffffffff 3>;
> + };
> +
> + opp5-600000000 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <1350000 1350000 1350000>;
> + opp-supported-hw = <0xffffffff 3>;
> + };
> +
> + opp6-720000000 {
> + opp-hz = /bits/ 64 <720000000>;
> + opp-microvolt = <1350000 1350000 1350000>;
> + /* only high-speed grade omap3530 devices */
> + opp-supported-hw = <0xffffffff 2>;
> + };
> + };
> +
> ocp@...00000 {
> omap3_pmx_core2: pinmux@...025d8 {
> compatible = "ti,omap3-padconf", "pinctrl-single";
> diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
> index 6fb23ada1f64..44f25b0eb45b 100644
> --- a/arch/arm/boot/dts/omap36xx.dtsi
> +++ b/arch/arm/boot/dts/omap36xx.dtsi
> @@ -19,15 +19,52 @@
> };
>
> cpus {
> - /* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */
> + /* OMAP3630/OMAP37xx variants OPP50 to OPP130 and OPP1G */
> cpu: cpu@0 {
> - operating-points = <
> - /* kHz uV */
> - 300000 1012500
> - 600000 1200000
> - 800000 1325000
> - >;
> - clock-latency = <300000>; /* From legacy driver */
> + operating-points-v2 = <&cpu0_opp_table>;
> +
> + clock-latency = <300000>; /* From omap-cpufreq driver */
> + };
> + };
> +
> + /* see Documentation/devicetree/bindings/opp/opp.txt */
> + cpu0_opp_table: opp-table {
> + compatible = "operating-points-v2-ti-cpu";
> + syscon = <&scm_conf>;
> +
> + opp50-300000000 {
> + opp-hz = /bits/ 64 <300000000>;
> + /*
> + * we currently only select the max voltage from table
> + * Table 4-19 of the DM3730 Data sheet (SPRS685B)
> + * Format is: <target min max>
> + */
> + opp-microvolt = <1012500 1012500 1012500>;
> + /*
> + * first value is silicon revision bit mask
> + * second one is "speed binned" bit mask
> + */
> + opp-supported-hw = <0xffffffff 3>;
> + opp-suspend;
> + };
> +
> + opp100-600000000 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <1200000 1200000 1200000>;
> + opp-supported-hw = <0xffffffff 3>;
> + };
> +
> + opp130-800000000 {
> + opp-hz = /bits/ 64 <800000000>;
> + opp-microvolt = <1325000 1325000 1325000>;
> + opp-supported-hw = <0xffffffff 3>;
> + };
> +
> + opp1g-1000000000 {
> + opp-hz = /bits/ 64 <1000000000>;
> + opp-microvolt = <1375000 1375000 1375000>;
> + /* only on am/dm37x with speed-binned bit set */
> + opp-supported-hw = <0xffffffff 2>;
> };
> };
>
> diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
> index 03dc4244ab00..68b7fc4225f8 100644
> --- a/drivers/cpufreq/cpufreq-dt-platdev.c
> +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
> @@ -86,7 +86,6 @@ static const struct of_device_id whitelist[] __initconst = {
> { .compatible = "st-ericsson,u9540", },
>
> { .compatible = "ti,omap2", },
> - { .compatible = "ti,omap3", },
> { .compatible = "ti,omap4", },
> { .compatible = "ti,omap5", },
>
> @@ -132,6 +131,7 @@ static const struct of_device_id blacklist[] __initconst = {
> { .compatible = "ti,am33xx", },
> { .compatible = "ti,am43", },
> { .compatible = "ti,dra7", },
> + { .compatible = "ti,omap3", },
>
> { }
> };
> --
> 2.19.1
>
Powered by blists - more mailing lists