linux-kernel - [PATCH v3 1/2] dt-bindings: mmc: add DT bindings for Milbeaut SD controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-Id: <1568079652-28849-1-git-send-email-orito.takao@socionext.com>
Date:   Tue, 10 Sep 2019 10:40:52 +0900
From:   Takao Orito <orito.takao@...ionext.com>
To:     ulf.hansson@...aro.org, robh+dt@...nel.org, mark.rutland@....com,
        adrian.hunter@...el.com
Cc:     linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, masami.hiramatsu@...aro.org,
        jaswinder.singh@...aro.org, sugaya.taichi@...ionext.com,
        kasai.kazuhiro@...ionext.com, kanematsu.shinji@...ionext.com,
        orito.takao@...ionext.com
Subject: [PATCH v3 1/2] dt-bindings: mmc: add DT bindings for Milbeaut SD controller

Add the device-tree binding documentation for Milbeaut SDHCI driver.

Signed-off-by: Takao Orito <orito.takao@...ionext.com>
Reviewed-by: Rob Herring <robh@...nel.org>
---
 .../devicetree/bindings/mmc/sdhci-milbeaut.txt     | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt b/Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt
new file mode 100644
index 0000000..627ee89
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt
@@ -0,0 +1,30 @@
+* SOCIONEXT Milbeaut SDHCI controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci_milbeaut driver.
+
+Required properties:
+- compatible: "socionext,milbeaut-m10v-sdhci-3.0"
+- clocks: Must contain an entry for each entry in clock-names. It is a
+  list of phandles and clock-specifier pairs.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Should contain the following two entries:
+	"iface" - clock used for sdhci interface
+	"core"  - core clock for sdhci controller
+
+Optional properties:
+- fujitsu,cmd-dat-delay-select: boolean property indicating that this host
+  requires the CMD_DAT_DELAY control to be enabled.
+
+Example:
+	sdhci3: mmc@...10000 {
+		compatible = "socionext,milbeaut-m10v-sdhci-3.0";
+		reg = <0x1b010000 0x10000>;
+		interrupts = <0 265 0x4>;
+		voltage-ranges = <3300 3300>;
+		bus-width = <4>;
+		clocks = <&clk 7>, <&ahb_clk>;
+		clock-names = "core", "iface";
+		cap-sdio-irq;
+		fujitsu,cmd-dat-delay-select;
+	};
-- 
1.9.1