| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <d5ebcfa1-31f4-1167-1e83-ece78ec2a630@redhat.com>
Date: Tue, 10 Sep 2019 21:22:35 +0800
From: Jason Wang <jasowang@...hat.com>
To: "Michael S. Tsirkin" <mst@...hat.com>
Cc: kvm@...r.kernel.org, virtualization@...ts.linux-foundation.org,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
kwankhede@...dia.com, alex.williamson@...hat.com,
cohuck@...hat.com, tiwei.bie@...el.com, maxime.coquelin@...hat.com,
cunming.liang@...el.com, zhihong.wang@...el.com,
rob.miller@...adcom.com, idos@...lanox.com, xiao.w.wang@...el.com,
haotian.wang@...ive.com
Subject: Re: [RFC PATCH 4/4] docs: Sample driver to demonstrate how to
implement virtio-mdev framework
On 2019/9/10 下午6:15, Michael S. Tsirkin wrote:
> On Tue, Sep 10, 2019 at 04:19:35PM +0800, Jason Wang wrote:
>> This sample driver creates mdev device that simulate virtio net device
>> over virtio mdev transport. The device is implemented through vringh
>> and workqueue.
>>
>> Signed-off-by: Jason Wang <jasowang@...hat.com>
>> ---
>> samples/Kconfig | 7 +
>> samples/vfio-mdev/Makefile | 1 +
>> samples/vfio-mdev/mvnet.c | 766 +++++++++++++++++++++++++++++++++++++
>> 3 files changed, 774 insertions(+)
>> create mode 100644 samples/vfio-mdev/mvnet.c
> So for a POC, this is a bit too rough to be able to judge
> whether the approach is workable.
> Can you get it a bit more into shape esp wrt UAPI?
Will do, actually I'm not 100% sure it need to go through UAPI.
Technically we can expose them for userspace but do we want something
simpler e.g vhost? Then we can make it as an internal API without caring
about UAPI stuffs like compatibility etc.
Except for UAPI, another other thing that can help you to judge this
approach? E.g we can make the device more reasonable rather than a
simple loopback device, e.g implementing a pair network device. But it
might be too complex for just a sample.
>
>> diff --git a/samples/Kconfig b/samples/Kconfig
>> index c8dacb4dda80..a1a1ca2c00b7 100644
>> --- a/samples/Kconfig
>> +++ b/samples/Kconfig
>> @@ -131,6 +131,13 @@ config SAMPLE_VFIO_MDEV_MDPY
>> mediated device. It is a simple framebuffer and supports
>> the region display interface (VFIO_GFX_PLANE_TYPE_REGION).
>>
>> +config SAMPLE_VIRTIO_MDEV_NET
>> + tristate "Build virtio mdev net example mediated device sample code -- loadable modules only"
>> + depends on VIRTIO_MDEV_DEVICE && VHOST_RING && m
>> + help
>> + Build a networking sample device for use as a virtio
>> + mediated device.
>> +
>> config SAMPLE_VFIO_MDEV_MDPY_FB
>> tristate "Build VFIO mdpy example guest fbdev driver -- loadable module only"
>> depends on FB && m
>> diff --git a/samples/vfio-mdev/Makefile b/samples/vfio-mdev/Makefile
>> index 10d179c4fdeb..f34af90ed0a0 100644
>> --- a/samples/vfio-mdev/Makefile
>> +++ b/samples/vfio-mdev/Makefile
>> @@ -3,3 +3,4 @@ obj-$(CONFIG_SAMPLE_VFIO_MDEV_MTTY) += mtty.o
>> obj-$(CONFIG_SAMPLE_VFIO_MDEV_MDPY) += mdpy.o
>> obj-$(CONFIG_SAMPLE_VFIO_MDEV_MDPY_FB) += mdpy-fb.o
>> obj-$(CONFIG_SAMPLE_VFIO_MDEV_MBOCHS) += mbochs.o
>> +obj-$(CONFIG_SAMPLE_VIRTIO_MDEV_NET) += mvnet.o
>> diff --git a/samples/vfio-mdev/mvnet.c b/samples/vfio-mdev/mvnet.c
>> new file mode 100644
>> index 000000000000..da295b41955e
>> --- /dev/null
>> +++ b/samples/vfio-mdev/mvnet.c
>> @@ -0,0 +1,766 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Mediated virtual virtio-net device driver.
>> + *
>> + * Copyright (c) 2019, Red Hat Inc. All rights reserved.
>> + * Author: Jason Wang <jasowang@...hat.com>
>> + *
>> + * Sample driver
>
> Documentation on how to use this?
Will add.
>
>
>> that creates mdev device that simulates ethernet
>> + * device virtio mdev transport.
>
> Well not exactly. What it seems to do is short-circuit
> RX and TX rings.
Yes, a loopback device.
>
>> + */
>> +
>> +#include <linux/init.h>
>> +#include <linux/module.h>
>> +#include <linux/device.h>
>> +#include <linux/kernel.h>
>> +#include <linux/fs.h>
>> +#include <linux/poll.h>
>> +#include <linux/slab.h>
>> +#include <linux/sched.h>
>> +#include <linux/wait.h>
>> +#include <linux/uuid.h>
>> +#include <linux/iommu.h>
>> +#include <linux/sysfs.h>
>> +#include <linux/file.h>
>> +#include <linux/etherdevice.h>
>> +#include <linux/mdev.h>
>> +#include <uapi/linux/virtio_mdev.h>
>> +
>> +#define VERSION_STRING "0.1"
>> +#define DRIVER_AUTHOR "NVIDIA Corporation"
>> +
>> +#define MVNET_CLASS_NAME "mvnet"
>> +
>> +#define MVNET_NAME "mvnet"
>> +
>> +/*
>> + * Global Structures
>> + */
>> +
>> +static struct mvnet_dev {
>> + struct class *vd_class;
>> + struct idr vd_idr;
>> + struct device dev;
>> +} mvnet_dev;
>> +
>> +struct mvnet_virtqueue {
>> + struct vringh vring;
>> + struct vringh_kiov iov;
>> + unsigned short head;
>> + bool ready;
>> + u32 desc_addr_lo;
>> + u32 desc_addr_hi;
>> + u32 device_addr_lo;
>> + u32 device_addr_hi;
>> + u32 driver_addr_lo;
>> + u32 driver_addr_hi;
>> + u64 desc_addr;
>> + u64 device_addr;
>> + u64 driver_addr;
>> + void *private;
>> + irqreturn_t (*cb)(void *);
>> +};
>> +
>> +#define MVNET_QUEUE_ALIGN PAGE_SIZE
>> +#define MVNET_QUEUE_MAX 256
>> +#define MVNET_MAGIC_VALUE ('v' | 'i' << 8 | 'r' << 16 | 't' << 24)
>> +#define MVNET_VERSION 0x1 /* Implies virtio 1.0 */
>> +#define MVNET_DEVICE_ID 0x1 /* network card */
>> +#define MVNET_VENDOR_ID 0 /* is this correct ? */
>> +#define MVNET_DEVICE_FEATURES VIRTIO_F_VERSION_1
>> +
>> +u64 mvnet_features = (1ULL << VIRTIO_F_ANY_LAYOUT) |
>> + (1ULL << VIRTIO_F_VERSION_1) |
>> + (1ULL << VIRTIO_F_IOMMU_PLATFORM) ;
>> +
>> +/* State of each mdev device */
>> +struct mvnet_state {
>> + struct mvnet_virtqueue vqs[2];
>> + struct work_struct work;
>> + spinlock_t lock;
>> + struct mdev_device *mdev;
>> + struct virtio_net_config config;
>> + struct virtio_mdev_callback *cbs;
>> + void *buffer;
>> + u32 queue_sel;
>> + u32 driver_features_sel;
>> + u32 driver_features[2];
>> + u32 device_features_sel;
>> + u32 status;
>> + u32 generation;
>> + u32 num;
>> + struct list_head next;
>> +};
>> +
>> +static struct mutex mdev_list_lock;
>> +static struct list_head mdev_devices_list;
>> +
>> +static void mvnet_queue_ready(struct mvnet_state *mvnet, unsigned idx)
>> +{
>> + struct mvnet_virtqueue *vq = &mvnet->vqs[idx];
>> + int ret;
>> +
>> + vq->desc_addr = (u64)vq->desc_addr_hi << 32 | vq->desc_addr_lo;
>> + vq->device_addr = (u64)vq->device_addr_hi << 32 | vq->device_addr_lo;
>> + vq->driver_addr = (u64)vq->driver_addr_hi << 32 | vq->driver_addr_lo;
>> +
>> + ret = vringh_init_kern(&vq->vring, mvnet_features, MVNET_QUEUE_MAX,
>> + false, (struct vring_desc *)vq->desc_addr,
>> + (struct vring_avail *)vq->driver_addr,
>> + (struct vring_used *)vq->device_addr);
>> +}
>> +
>> +static ssize_t mvnet_read_config(struct mdev_device *mdev,
>> + u32 *val, loff_t pos)
>> +{
>> + struct mvnet_state *mvnet;
>> + struct mvnet_virtqueue *vq;
>> + u32 queue_sel;
>> +
>> + if (!mdev || !val)
>> + return -EINVAL;
>> +
>> + mvnet = mdev_get_drvdata(mdev);
>> + if (!mvnet) {
>> + pr_err("%s mvnet not found\n", __func__);
>> + return -EINVAL;
>> + }
>> +
>> + queue_sel = mvnet->queue_sel;
>> + vq = &mvnet->vqs[queue_sel];
>> +
>> + switch (pos) {
>> + case VIRTIO_MDEV_MAGIC_VALUE:
>> + *val = MVNET_MAGIC_VALUE;
>> + break;
>> + case VIRTIO_MDEV_VERSION:
>> + *val = MVNET_VERSION;
>> + break;
>> + case VIRTIO_MDEV_DEVICE_ID:
>> + *val = MVNET_DEVICE_ID;
>> + break;
>> + case VIRTIO_MDEV_VENDOR_ID:
>> + *val = MVNET_VENDOR_ID;
>> + break;
>> + case VIRTIO_MDEV_DEVICE_FEATURES:
>> + if (mvnet->device_features_sel)
>> + *val = mvnet_features >> 32;
>> + else
>> + *val = mvnet_features;
>> + break;
>> + case VIRTIO_MDEV_QUEUE_NUM_MAX:
>> + *val = MVNET_QUEUE_MAX;
>> + break;
>> + case VIRTIO_MDEV_QUEUE_READY:
>> + *val = vq->ready;
>> + break;
>> + case VIRTIO_MDEV_QUEUE_ALIGN:
>> + *val = MVNET_QUEUE_ALIGN;
>> + break;
>> + case VIRTIO_MDEV_STATUS:
>> + *val = mvnet->status;
>> + break;
>> + case VIRTIO_MDEV_QUEUE_DESC_LOW:
>> + *val = vq->desc_addr_lo;
>> + break;
>> + case VIRTIO_MDEV_QUEUE_DESC_HIGH:
>> + *val = vq->desc_addr_hi;
>> + break;
>> + case VIRTIO_MDEV_QUEUE_AVAIL_LOW:
>> + *val = vq->driver_addr_lo;
>> + break;
>> + case VIRTIO_MDEV_QUEUE_AVAIL_HIGH:
>> + *val = vq->driver_addr_hi;
>> + break;
>> + case VIRTIO_MDEV_QUEUE_USED_LOW:
>> + *val = vq->device_addr_lo;
>> + break;
>> + case VIRTIO_MDEV_QUEUE_USED_HIGH:
>> + *val = vq->device_addr_hi;
>> + break;
>> + case VIRTIO_MDEV_CONFIG_GENERATION:
>> + *val = 1;
>> + break;
>> + default:
>> + pr_err("Unsupported mdev read offset at 0x%x\n", pos);
>> + break;
>> + }
>> +
>> + return 4;
>> +}
>> +
>> +static ssize_t mvnet_read_net_config(struct mdev_device *mdev,
>> + char *buf, size_t count, loff_t pos)
>> +{
>> + struct mvnet_state *mvnet = mdev_get_drvdata(mdev);
>> +
>> + if (!mvnet) {
>> + pr_err("%s mvnet not found\n", __func__);
>> + return -EINVAL;
>> + }
>> +
>> + if (pos + count > sizeof(mvnet->config))
>> + return -EINVAL;
>> +
>> + memcpy(buf, &mvnet->config + (unsigned)pos, count);
>> +
>> + return count;
>> +}
>> +
>> +static void mvnet_vq_reset(struct mvnet_virtqueue *vq)
>> +{
>> + vq->ready = 0;
>> + vq->desc_addr_lo = vq->desc_addr_hi = 0;
>> + vq->device_addr_lo = vq->device_addr_hi = 0;
>> + vq->driver_addr_lo = vq->driver_addr_hi = 0;
>> + vq->desc_addr = 0;
>> + vq->driver_addr = 0;
>> + vq->device_addr = 0;
>> + vringh_init_kern(&vq->vring, mvnet_features, MVNET_QUEUE_MAX,
>> + false, 0, 0, 0);
>> +}
>> +
>> +static void mvnet_reset(struct mvnet_state *mvnet)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < 2; i++)
>> + mvnet_vq_reset(&mvnet->vqs[i]);
>> +
>> + mvnet->queue_sel = 0;
>> + mvnet->driver_features_sel = 0;
>> + mvnet->device_features_sel = 0;
>> + mvnet->status = 0;
>> + ++mvnet->generation;
>> +}
>> +
>> +static ssize_t mvnet_write_config(struct mdev_device *mdev,
>> + u32 *val, loff_t pos)
>> +{
>> + struct mvnet_state *mvnet;
>> + struct mvnet_virtqueue *vq;
>> + u32 queue_sel;
>> +
>> + if (!mdev || !val)
>> + return -EINVAL;
>> +
>> + mvnet = mdev_get_drvdata(mdev);
>> + if (!mvnet) {
>> + pr_err("%s mvnet not found\n", __func__);
>> + return -EINVAL;
>> + }
>> +
>> + queue_sel = mvnet->queue_sel;
>> + vq = &mvnet->vqs[queue_sel];
>> +
>> + switch (pos) {
>> + case VIRTIO_MDEV_DEVICE_FEATURES_SEL:
>> + mvnet->device_features_sel = *val;
>> + break;
>> + case VIRTIO_MDEV_DRIVER_FEATURES:
>> + mvnet->driver_features[mvnet->driver_features_sel] = *val;
>> + break;
>> + case VIRTIO_MDEV_DRIVER_FEATURES_SEL:
>> + mvnet->driver_features_sel = *val;
>> + break;
>> + case VIRTIO_MDEV_QUEUE_SEL:
>> + mvnet->queue_sel = *val;
>> + break;
>> + case VIRTIO_MDEV_QUEUE_NUM:
>> + mvnet->num = *val;
>> + break;
>> + case VIRTIO_MDEV_QUEUE_READY:
>> + vq->ready = *val;
>> + if (vq->ready) {
>> + spin_lock(&mvnet->lock);
>> + mvnet_queue_ready(mvnet, queue_sel);
>> + spin_unlock(&mvnet->lock);
>> + }
>> + break;
>> + case VIRTIO_MDEV_QUEUE_NOTIFY:
>> + if (vq->ready)
>> + schedule_work(&mvnet->work);
>> + break;
>> + case VIRTIO_MDEV_STATUS:
>> + mvnet->status = *val;
>> + if (*val == 0) {
>> + spin_lock(&mvnet->lock);
>> + mvnet_reset(mvnet);
>> + spin_unlock(&mvnet->lock);
>> + }
>> + break;
>> + case VIRTIO_MDEV_QUEUE_DESC_LOW:
>> + vq->desc_addr_lo = *val;
>> + break;
>> + case VIRTIO_MDEV_QUEUE_DESC_HIGH:
>> + vq->desc_addr_hi = *val;
>> + break;
>> + case VIRTIO_MDEV_QUEUE_AVAIL_LOW:
>> + vq->driver_addr_lo = *val;
>> + break;
>> + case VIRTIO_MDEV_QUEUE_AVAIL_HIGH:
>> + vq->driver_addr_hi = *val;
>> + break;
>> + case VIRTIO_MDEV_QUEUE_USED_LOW:
>> + vq->device_addr_lo = *val;
>> + break;
>> + case VIRTIO_MDEV_QUEUE_USED_HIGH:
>> + vq->device_addr_hi = *val;
>> + break;
>> + default:
>> + pr_err("Unsupported write offset! 0x%x\n", pos);
>> + break;
>> + }
>> + spin_unlock(&mvnet->lock);
>> +
>> + return 4;
>> +}
>> +
>> +static void mvnet_work(struct work_struct *work)
>> +{
>> + struct mvnet_state *mvnet = container_of(work, struct
>> + mvnet_state, work);
>> + struct mvnet_virtqueue *txq = &mvnet->vqs[1];
>> + struct mvnet_virtqueue *rxq = &mvnet->vqs[0];
>> + size_t read, write, total_write;
>> + unsigned long flags;
>> + int err;
>> + int pkts = 0;
>> +
>> + spin_lock(&mvnet->lock);
>> +
>> + if (!txq->ready || !rxq->ready)
>> + goto out;
>> +
>> + while (true) {
>> + total_write = 0;
>> + err = vringh_getdesc_kern(&txq->vring, &txq->iov, NULL,
>> + &txq->head, GFP_KERNEL);
>> + if (err <= 0)
>> + break;
>> +
>> + err = vringh_getdesc_kern(&rxq->vring, NULL, &rxq->iov,
>> + &rxq->head, GFP_KERNEL);
>
> GFP_KERNEL under a spin_lock will cause deadlocks.
Will fix.
>
>
>> + if (err <= 0) {
>> + vringh_complete_kern(&txq->vring, txq->head, 0);
>> + break;
>> + }
>> +
>> + while (true) {
>> + read = vringh_iov_pull_kern(&txq->iov, mvnet->buffer,
>> + PAGE_SIZE);
>> + if (read <= 0)
>> + break;
>> +
>> + write = vringh_iov_push_kern(&rxq->iov, mvnet->buffer,
>> + read);
>> + if (write <= 0)
>> + break;
>> +
>> + total_write += write;
>> + }
>> +
>> + /* Make sure data is wrote before advancing index */
>> + smp_wmb();
>> +
>> + vringh_complete_kern(&txq->vring, txq->head, 0);
>> + vringh_complete_kern(&rxq->vring, rxq->head, total_write);
>> +
>> + /* Make sure used is visible before rasing the
>> + interrupt */
>> + smp_wmb();
>> +
>> + local_bh_disable();
>> + if (txq->cb)
>> + txq->cb(txq->private);
>> + if (rxq->cb)
>> + rxq->cb(rxq->private);
>> + local_bh_enable();
>> +
>> + pkts ++;
> coding style problem
Will fix.
>
>> + if (pkts > 4) {
>> + schedule_work(&mvnet->work);
>> + goto out;
>> + }
>> + }
>> +
>> +out:
>> + spin_unlock(&mvnet->lock);
>> +}
>> +
>> +static dma_addr_t mvnet_map_page(struct device *dev, struct page *page,
>> + unsigned long offset, size_t size,
>> + enum dma_data_direction dir,
>> + unsigned long attrs)
>> +{
>> + /* Vringh can only use VA */
>> + return page_address(page) + offset;
>> +}
>> +
>> +static void mvnet_unmap_page(struct device *dev, dma_addr_t dma_addr,
>> + size_t size, enum dma_data_direction dir,
>> + unsigned long attrs)
>> +{
>> + return ;
>> +}
>> +
>> +static void *mvnet_alloc_coherent(struct device *dev, size_t size,
>> + dma_addr_t *dma_addr, gfp_t flag,
>> + unsigned long attrs)
>> +{
>> + void *ret = kmalloc(size, flag);
>> +
>> + if (ret == NULL)
> !ret is nicer
Yes.
>
>> + *dma_addr = DMA_MAPPING_ERROR;
>> + else
>> + *dma_addr = ret;
> Not sure how does this build ... don't we need a cast?
It builds but will fix for sure.
>
>> +
>> + return ret;
>> +}
>> +
>> +static void mvnet_free_coherent(struct device *dev, size_t size,
>> + void *vaddr, dma_addr_t dma_addr,
>> + unsigned long attrs)
>> +{
>> + kfree(dma_addr);
>> +}
>> +
>> +static const struct dma_map_ops mvnet_dma_ops = {
>> + .map_page = mvnet_map_page,
>> + .unmap_page = mvnet_unmap_page,
>> + .alloc = mvnet_alloc_coherent,
>> + .free = mvnet_free_coherent,
>> +};
>> +
>> +static int mvnet_create(struct kobject *kobj, struct mdev_device *mdev)
>> +{
>> + struct mvnet_state *mvnet;
>> + struct virtio_net_config *config;
>> +
>> + if (!mdev)
>> + return -EINVAL;
>> +
>> + mvnet = kzalloc(sizeof(struct mvnet_state), GFP_KERNEL);
>> + if (mvnet == NULL)
>> + return -ENOMEM;
>> +
>> + mvnet->buffer = kmalloc(PAGE_SIZE, GFP_KERNEL);
>> + if (!mvnet->buffer) {
>> + kfree(mvnet);
>> + return -ENOMEM;
>> + }
>> +
>> + config = &mvnet->config;
>> + config->mtu = 1500;
>> + config->status = VIRTIO_NET_S_LINK_UP;
>> + eth_random_addr(config->mac);
>> +
>> + INIT_WORK(&mvnet->work, mvnet_work);
>> +
>> + spin_lock_init(&mvnet->lock);
>> + mvnet->mdev = mdev;
>> + mdev_set_drvdata(mdev, mvnet);
>> +
>> + mutex_lock(&mdev_list_lock);
>> + list_add(&mvnet->next, &mdev_devices_list);
>> + mutex_unlock(&mdev_list_lock);
>> +
>> + mdev_set_dma_ops(mdev, &mvnet_dma_ops);
>> +
>> + return 0;
>> +}
>> +
>> +static int mvnet_remove(struct mdev_device *mdev)
>> +{
>> + struct mvnet_state *mds, *tmp_mds;
>> + struct mvnet_state *mvnet = mdev_get_drvdata(mdev);
>> + int ret = -EINVAL;
>> +
>> + mutex_lock(&mdev_list_lock);
>> + list_for_each_entry_safe(mds, tmp_mds, &mdev_devices_list, next) {
>> + if (mvnet == mds) {
>> + list_del(&mvnet->next);
>> + mdev_set_drvdata(mdev, NULL);
>> + kfree(mvnet->buffer);
>> + kfree(mvnet);
>> + ret = 0;
>> + break;
>> + }
>> + }
>> + mutex_unlock(&mdev_list_lock);
>> +
>> + return ret;
>> +}
>> +
>> +static ssize_t mvnet_read(struct mdev_device *mdev, char __user *buf,
>> + size_t count, loff_t *ppos)
>> +{
>> + ssize_t ret;
>> +
>> + if (*ppos < VIRTIO_MDEV_CONFIG) {
>> + if (count == 4)
>> + ret = mvnet_read_config(mdev, (u32 *)buf, *ppos);
>> + else
>> + ret = -EINVAL;
>> + *ppos += 4;
>> + } else if (*ppos < VIRTIO_MDEV_CONFIG + sizeof(struct virtio_net_config)) {
>> + ret = mvnet_read_net_config(mdev, buf, count,
>> + *ppos - VIRTIO_MDEV_CONFIG);
>> + *ppos += count;
>> + } else {
>> + ret = -EINVAL;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static ssize_t mvnet_write(struct mdev_device *mdev, const char __user *buf,
>> + size_t count, loff_t *ppos)
>> +{
>> + int ret;
>> +
>> + if (*ppos < VIRTIO_MDEV_CONFIG) {
>> + if (count == 4)
>> + ret = mvnet_write_config(mdev, (u32 *)buf, *ppos);
>> + else
>> + ret = -EINVAL;
>> + *ppos += 4;
>> + } else {
>> + /* No writable net config */
>> + ret = -EINVAL;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static long mvnet_ioctl(struct mdev_device *mdev, unsigned int cmd,
>> + unsigned long arg)
>> +{
>> + int ret = 0;
>> + struct mvnet_state *mvnet;
>> + struct virtio_mdev_callback *cb;
>> +
>> + if (!mdev)
>> + return -EINVAL;
>> +
>> + mvnet = mdev_get_drvdata(mdev);
>> + if (!mvnet)
>> + return -ENODEV;
>> +
>> + spin_lock(&mvnet->lock);
>> +
>> + switch (cmd) {
>> + case VIRTIO_MDEV_SET_VQ_CALLBACK:
>> + cb = (struct virtio_mdev_callback *)arg;
>> + mvnet->vqs[mvnet->queue_sel].cb = cb->callback;
>> + mvnet->vqs[mvnet->queue_sel].private = cb->private;
>> + break;
>> + case VIRTIO_MDEV_SET_CONFIG_CALLBACK:
>> + break;
> success, but nothing happens.
Because the device never raise any config interrupt.
>
>> + default:
>> + pr_err("Not supportted ioctl cmd 0x%x\n", cmd);
>> + ret = -ENOTTY;
>> + break;
>> + }
>> +
>> + spin_unlock(&mvnet->lock);
>> +
>> + return ret;
>> +}
>> +
>> +static int mvnet_open(struct mdev_device *mdev)
>> +{
>> + pr_info("%s\n", __func__);
>> + return 0;
>> +}
>> +
>> +static void mvnet_close(struct mdev_device *mdev)
>> +{
>> + pr_info("%s\n", __func__);
>> +}
>> +
>> +static ssize_t
>> +sample_mvnet_dev_show(struct device *dev, struct device_attribute *attr,
>> + char *buf)
>> +{
>> + return sprintf(buf, "This is phy device\n");
>
> what's this?
Will remove, copy&paste error from mtty.c.
>
>> +}
>> +
>> +static DEVICE_ATTR_RO(sample_mvnet_dev);
>> +
>> +static struct attribute *mvnet_dev_attrs[] = {
>> + &dev_attr_sample_mvnet_dev.attr,
>> + NULL,
>> +};
>> +
>> +static const struct attribute_group mvnet_dev_group = {
>> + .name = "mvnet_dev",
>> + .attrs = mvnet_dev_attrs,
>> +};
>> +
>> +static const struct attribute_group *mvnet_dev_groups[] = {
>> + &mvnet_dev_group,
>> + NULL,
>> +};
>> +
>> +static ssize_t
>> +sample_mdev_dev_show(struct device *dev, struct device_attribute *attr,
>> + char *buf)
>> +{
>> + if (mdev_from_dev(dev))
>> + return sprintf(buf, "This is MDEV %s\n", dev_name(dev));
>> +
>> + return sprintf(buf, "\n");
>> +}
>> +
>> +static DEVICE_ATTR_RO(sample_mdev_dev);
>> +
>> +static struct attribute *mdev_dev_attrs[] = {
>> + &dev_attr_sample_mdev_dev.attr,
>> + NULL,
>> +};
>> +
>> +static const struct attribute_group mdev_dev_group = {
>> + .name = "vendor",
>> + .attrs = mdev_dev_attrs,
>> +};
>> +
>> +static const struct attribute_group *mdev_dev_groups[] = {
>> + &mdev_dev_group,
>> + NULL,
>> +};
>> +
>> +#define MVNET_STRING_LEN 16
>> +
>> +static ssize_t
>> +name_show(struct kobject *kobj, struct device *dev, char *buf)
>> +{
>> + char name[MVNET_STRING_LEN];
>> + const char *name_str = "virtio-net";
>> +
>> + snprintf(name, MVNET_STRING_LEN, "%s", dev_driver_string(dev));
>> + if (!strcmp(kobj->name, name))
>> + return sprintf(buf, "%s\n", name_str);
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static MDEV_TYPE_ATTR_RO(name);
>> +
>> +static ssize_t
>> +available_instances_show(struct kobject *kobj, struct device *dev, char *buf)
>> +{
>> + return sprintf(buf, "%d\n", INT_MAX);
>> +}
>> +
>> +static MDEV_TYPE_ATTR_RO(available_instances);
>
> ?
It used to demonstrate how many available instances that could be
created for this device. We don't have such limitation for software.
Thanks
>
>> +
>> +static ssize_t device_api_show(struct kobject *kobj, struct device *dev,
>> + char *buf)
>> +{
>> + return sprintf(buf, "%s\n", VIRTIO_MDEV_DEVICE_API_STRING);
>> +}
>> +
>> +static MDEV_TYPE_ATTR_RO(device_api);
>> +
>> +static struct attribute *mdev_types_attrs[] = {
>> + &mdev_type_attr_name.attr,
>> + &mdev_type_attr_device_api.attr,
>> + &mdev_type_attr_available_instances.attr,
>> + NULL,
>> +};
>> +
>> +static struct attribute_group mdev_type_group = {
>> + .name = "",
>> + .attrs = mdev_types_attrs,
>> +};
>> +
>> +static struct attribute_group *mdev_type_groups[] = {
>> + &mdev_type_group,
>> + NULL,
>> +};
>> +
>> +static const struct mdev_parent_ops mdev_fops = {
>> + .owner = THIS_MODULE,
>> + .dev_attr_groups = mvnet_dev_groups,
>> + .mdev_attr_groups = mdev_dev_groups,
>> + .supported_type_groups = mdev_type_groups,
>> + .create = mvnet_create,
>> + .remove = mvnet_remove,
>> + .open = mvnet_open,
>> + .release = mvnet_close,
>> + .read = mvnet_read,
>> + .write = mvnet_write,
>> + .ioctl = mvnet_ioctl,
>> +};
>> +
>> +static void mvnet_device_release(struct device *dev)
>> +{
>> + dev_dbg(dev, "mvnet: released\n");
>> +}
>> +
>> +static int __init mvnet_dev_init(void)
>> +{
>> + int ret = 0;
>> +
>> + pr_info("mvnet_dev: %s\n", __func__);
>> +
>> + memset(&mvnet_dev, 0, sizeof(mvnet_dev));
>> +
>> + idr_init(&mvnet_dev.vd_idr);
>> +
>> + mvnet_dev.vd_class = class_create(THIS_MODULE, MVNET_CLASS_NAME);
>> +
>> + if (IS_ERR(mvnet_dev.vd_class)) {
>> + pr_err("Error: failed to register mvnet_dev class\n");
>> + ret = PTR_ERR(mvnet_dev.vd_class);
>> + goto failed1;
>> + }
>> +
>> + mvnet_dev.dev.class = mvnet_dev.vd_class;
>> + mvnet_dev.dev.release = mvnet_device_release;
>> + dev_set_name(&mvnet_dev.dev, "%s", MVNET_NAME);
>> +
>> + ret = device_register(&mvnet_dev.dev);
>> + if (ret)
>> + goto failed2;
>> +
>> + ret = mdev_register_device(&mvnet_dev.dev, &mdev_fops);
>> + if (ret)
>> + goto failed3;
>> +
>> + mutex_init(&mdev_list_lock);
>> + INIT_LIST_HEAD(&mdev_devices_list);
>> +
>> + goto all_done;
>> +
>> +failed3:
>> +
>> + device_unregister(&mvnet_dev.dev);
>> +failed2:
>> + class_destroy(mvnet_dev.vd_class);
>> +
>> +failed1:
>> +all_done:
>> + return ret;
>> +}
>> +
>> +static void __exit mvnet_dev_exit(void)
>> +{
>> + mvnet_dev.dev.bus = NULL;
>> + mdev_unregister_device(&mvnet_dev.dev);
>> +
>> + device_unregister(&mvnet_dev.dev);
>> + idr_destroy(&mvnet_dev.vd_idr);
>> + class_destroy(mvnet_dev.vd_class);
>> + mvnet_dev.vd_class = NULL;
>> + pr_info("mvnet_dev: Unloaded!\n");
>> +}
>> +
>> +module_init(mvnet_dev_init)
>> +module_exit(mvnet_dev_exit)
>> +
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_INFO(supported, "Test driver that simulate serial port over PCI");
>> +MODULE_VERSION(VERSION_STRING);
>> +MODULE_AUTHOR(DRIVER_AUTHOR);
>> --
>> 2.19.1
Powered by blists - more mailing lists