| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190911130314.29973-4-qperret@qperret.net>
Date: Wed, 11 Sep 2019 15:03:13 +0200
From: Quentin Perret <qperret@...rret.net>
To: edubezval@...il.com, rui.zhang@...el.com, javi.merino@...nel.org,
viresh.kumar@...aro.org, amit.kachhap@...il.com, rjw@...ysocki.net,
catalin.marinas@....com, will@...nel.org, daniel.lezcano@...aro.org
Cc: dietmar.eggemann@....com, ionela.voinescu@....com,
mka@...omium.org, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, qperret@...rret.net
Subject: [PATCH v8 3/4] thermal: cpu_cooling: Make the power-related code depend on IPA
From: Quentin Perret <quentin.perret@....com>
The core CPU cooling infrastructure has power-related functions
that have only one client: IPA. Since there can be no user of those
functions if IPA is not compiled in, make sure to guard them with
checks on CONFIG_THERMAL_GOV_POWER_ALLOCATOR to not waste space
unnecessarily.
Acked-by: Daniel Lezcano <daniel.lezcano@...aro.org>
Acked-by: Viresh Kumar <viresh.kumar@...aro.org>
Suggested-by: Daniel Lezcano <daniel.lezcano@...aro.org>
Signed-off-by: Quentin Perret <quentin.perret@....com>
---
drivers/thermal/cpu_cooling.c | 214 +++++++++++++++++-----------------
1 file changed, 104 insertions(+), 110 deletions(-)
diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index 4c5db59a619b..498f59ab64b2 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -46,7 +46,9 @@
*/
struct freq_table {
u32 frequency;
+#ifdef CONFIG_THERMAL_GOV_POWER_ALLOCATOR
u32 power;
+#endif
};
/**
@@ -96,28 +98,6 @@ static DEFINE_IDA(cpufreq_ida);
static DEFINE_MUTEX(cooling_list_lock);
static LIST_HEAD(cpufreq_cdev_list);
-/* Below code defines functions to be used for cpufreq as cooling device */
-
-/**
- * get_level: Find the level for a particular frequency
- * @cpufreq_cdev: cpufreq_cdev for which the property is required
- * @freq: Frequency
- *
- * Return: level corresponding to the frequency.
- */
-static unsigned long get_level(struct cpufreq_cooling_device *cpufreq_cdev,
- unsigned int freq)
-{
- struct freq_table *freq_table = cpufreq_cdev->freq_table;
- unsigned long level;
-
- for (level = 1; level <= cpufreq_cdev->max_level; level++)
- if (freq > freq_table[level].frequency)
- break;
-
- return level - 1;
-}
-
/**
* cpufreq_thermal_notifier - notifier callback for cpufreq policy change.
* @nb: struct notifier_block * with callback info.
@@ -171,6 +151,27 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb,
return NOTIFY_OK;
}
+#ifdef CONFIG_THERMAL_GOV_POWER_ALLOCATOR
+/**
+ * get_level: Find the level for a particular frequency
+ * @cpufreq_cdev: cpufreq_cdev for which the property is required
+ * @freq: Frequency
+ *
+ * Return: level corresponding to the frequency.
+ */
+static unsigned long get_level(struct cpufreq_cooling_device *cpufreq_cdev,
+ unsigned int freq)
+{
+ struct freq_table *freq_table = cpufreq_cdev->freq_table;
+ unsigned long level;
+
+ for (level = 1; level <= cpufreq_cdev->max_level; level++)
+ if (freq > freq_table[level].frequency)
+ break;
+
+ return level - 1;
+}
+
/**
* update_freq_table() - Update the freq table with power numbers
* @cpufreq_cdev: the cpufreq cooling device in which to update the table
@@ -319,80 +320,6 @@ static u32 get_dynamic_power(struct cpufreq_cooling_device *cpufreq_cdev,
return (raw_cpu_power * cpufreq_cdev->last_load) / 100;
}
-/* cpufreq cooling device callback functions are defined below */
-
-/**
- * cpufreq_get_max_state - callback function to get the max cooling state.
- * @cdev: thermal cooling device pointer.
- * @state: fill this variable with the max cooling state.
- *
- * Callback for the thermal cooling device to return the cpufreq
- * max cooling state.
- *
- * Return: 0 on success, an error code otherwise.
- */
-static int cpufreq_get_max_state(struct thermal_cooling_device *cdev,
- unsigned long *state)
-{
- struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
-
- *state = cpufreq_cdev->max_level;
- return 0;
-}
-
-/**
- * cpufreq_get_cur_state - callback function to get the current cooling state.
- * @cdev: thermal cooling device pointer.
- * @state: fill this variable with the current cooling state.
- *
- * Callback for the thermal cooling device to return the cpufreq
- * current cooling state.
- *
- * Return: 0 on success, an error code otherwise.
- */
-static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev,
- unsigned long *state)
-{
- struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
-
- *state = cpufreq_cdev->cpufreq_state;
-
- return 0;
-}
-
-/**
- * cpufreq_set_cur_state - callback function to set the current cooling state.
- * @cdev: thermal cooling device pointer.
- * @state: set this variable to the current cooling state.
- *
- * Callback for the thermal cooling device to change the cpufreq
- * current cooling state.
- *
- * Return: 0 on success, an error code otherwise.
- */
-static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
- unsigned long state)
-{
- struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
- unsigned int clip_freq;
-
- /* Request state should be less than max_level */
- if (WARN_ON(state > cpufreq_cdev->max_level))
- return -EINVAL;
-
- /* Check if the old cooling action is same as new cooling action */
- if (cpufreq_cdev->cpufreq_state == state)
- return 0;
-
- clip_freq = cpufreq_cdev->freq_table[state].frequency;
- cpufreq_cdev->cpufreq_state = state;
- cpufreq_cdev->clipped_freq = clip_freq;
-
- cpufreq_update_policy(cpufreq_cdev->policy->cpu);
-
- return 0;
-}
-
/**
* cpufreq_get_requested_power() - get the current power
* @cdev: &thermal_cooling_device pointer
@@ -536,22 +463,88 @@ static int cpufreq_power2state(struct thermal_cooling_device *cdev,
power);
return 0;
}
+#endif /* CONFIG_THERMAL_GOV_POWER_ALLOCATOR */
+
+/* cpufreq cooling device callback functions are defined below */
+
+/**
+ * cpufreq_get_max_state - callback function to get the max cooling state.
+ * @cdev: thermal cooling device pointer.
+ * @state: fill this variable with the max cooling state.
+ *
+ * Callback for the thermal cooling device to return the cpufreq
+ * max cooling state.
+ *
+ * Return: 0 on success, an error code otherwise.
+ */
+static int cpufreq_get_max_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
+
+ *state = cpufreq_cdev->max_level;
+ return 0;
+}
+
+/**
+ * cpufreq_get_cur_state - callback function to get the current cooling state.
+ * @cdev: thermal cooling device pointer.
+ * @state: fill this variable with the current cooling state.
+ *
+ * Callback for the thermal cooling device to return the cpufreq
+ * current cooling state.
+ *
+ * Return: 0 on success, an error code otherwise.
+ */
+static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
+
+ *state = cpufreq_cdev->cpufreq_state;
+
+ return 0;
+}
+
+/**
+ * cpufreq_set_cur_state - callback function to set the current cooling state.
+ * @cdev: thermal cooling device pointer.
+ * @state: set this variable to the current cooling state.
+ *
+ * Callback for the thermal cooling device to change the cpufreq
+ * current cooling state.
+ *
+ * Return: 0 on success, an error code otherwise.
+ */
+static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long state)
+{
+ struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
+ unsigned int clip_freq;
+
+ /* Request state should be less than max_level */
+ if (WARN_ON(state > cpufreq_cdev->max_level))
+ return -EINVAL;
+
+ /* Check if the old cooling action is same as new cooling action */
+ if (cpufreq_cdev->cpufreq_state == state)
+ return 0;
+
+ clip_freq = cpufreq_cdev->freq_table[state].frequency;
+ cpufreq_cdev->cpufreq_state = state;
+ cpufreq_cdev->clipped_freq = clip_freq;
+
+ cpufreq_update_policy(cpufreq_cdev->policy->cpu);
+
+ return 0;
+}
/* Bind cpufreq callbacks to thermal cooling device ops */
static struct thermal_cooling_device_ops cpufreq_cooling_ops = {
- .get_max_state = cpufreq_get_max_state,
- .get_cur_state = cpufreq_get_cur_state,
- .set_cur_state = cpufreq_set_cur_state,
-};
-
-static struct thermal_cooling_device_ops cpufreq_power_cooling_ops = {
.get_max_state = cpufreq_get_max_state,
.get_cur_state = cpufreq_get_cur_state,
.set_cur_state = cpufreq_set_cur_state,
- .get_requested_power = cpufreq_get_requested_power,
- .state2power = cpufreq_state2power,
- .power2state = cpufreq_power2state,
};
/* Notifier for cpufreq policy change */
@@ -659,18 +652,19 @@ __cpufreq_cooling_register(struct device_node *np,
pr_debug("%s: freq:%u KHz\n", __func__, freq);
}
+ cooling_ops = &cpufreq_cooling_ops;
+#ifdef CONFIG_THERMAL_GOV_POWER_ALLOCATOR
if (capacitance) {
ret = update_freq_table(cpufreq_cdev, capacitance);
if (ret) {
cdev = ERR_PTR(ret);
goto remove_ida;
}
-
- cooling_ops = &cpufreq_power_cooling_ops;
- } else {
- cooling_ops = &cpufreq_cooling_ops;
+ cooling_ops->get_requested_power = cpufreq_get_requested_power;
+ cooling_ops->state2power = cpufreq_state2power;
+ cooling_ops->power2state = cpufreq_power2state;
}
-
+#endif
cdev = thermal_of_cooling_device_register(np, dev_name, cpufreq_cdev,
cooling_ops);
if (IS_ERR(cdev))
--
2.22.1
Powered by blists - more mailing lists