[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <cover.1568224032.git.hns@goldelico.com>
Date: Wed, 11 Sep 2019 19:47:06 +0200
From: "H. Nikolaus Schaller" <hns@...delico.com>
To: Benoît Cousson <bcousson@...libre.com>,
Tony Lindgren <tony@...mide.com>,
Rob Herring <robh+dt@...nel.org>,
Adam Ford <aford173@...il.com>,
André Roth <neolynx@...il.com>,
Mark Rutland <mark.rutland@....com>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Viresh Kumar <viresh.kumar@...aro.org>,
Enric Balletbo i Serra <eballetbo@...il.com>,
Javier Martinez Canillas <javier@...hile0.org>,
Roger Quadros <rogerq@...com>,
Teresa Remmet <t.remmet@...tec.de>,
"H. Nikolaus Schaller" <hns@...delico.com>
Cc: linux-omap@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
letux-kernel@...nphoenux.org, kernel@...a-handheld.com,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v3 0/8] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits
CHANGES V3:
* make omap36xx control the abb-ldo and properly switch mode
(suggested by Adam Ford <aford173@...il.com>)
* add a note about enabling the turbo-mode OPPs
PATCH V2 2019-09-07 19:46:58:
* fix ti-cpufreq to properly describe which compatible string is legacy
* add some reviewed-by and acked-by Tony Lindgren <tony@...mide.com>
* include am3517 patches by Adam Ford <aford173@...il.com>
* review opp-suspend; and add turbo-mode; opp properties
* add a note how to disable an OPP in a board.dts file
PATCH V1 2019-09-07 08:56:19:
* fix typo in omap3-ldp.dts
(reported by Tony Lindgren <tony@...mide.com>)
* extend commit message to describe the bit patterns needed
for opp-supported-hw
* add error check to ioremap()
(suggested by Christ van Willegen <cvwillegen@...il.com>)
* update Documentation/devicetree/bindings/arm/omap/omap.txt
* change bulk update to use "ti,omap3430" and "ti,omap3630"
* update OPP4 of omap3430 to 1275 mV since it was not a valid
voltage for the twl4030 driver (reported by Tony Lindgren
<tony@...mide.com>)
RFC V2 2019-09-04 10:53:43:
* merge separate patch to remove opp-v1 table from n950-n9 into
the general omap3xxx.dtsi patch
(suggested by Viresh Kumar <viresh.kumar@...aro.org>)
* add legacy compatibility to ti,omap3430 and ti,omap3630 for
the ti-cpufreq driver
* make driver and omap3xxx.dtsi patches pass checkpatch
* add bulk patch to explicitly define compatibility to ti,omap3430
and ti,omap36xx in addition to ti,omap3 of all in-tree boards
where it was missing
RFC V1 2019-09-02 12:55:55:
This patch set converts the omap3 opp tables to opp-v2 format
and extends the ti-cpufreq to support omap3.
It adds 720 MHz (omap34xx) and 1 GHz (omap36xx) OPPs but
tells the ti-cpufreq driver to disable them if the speed
binned / 720MHz grade eFuse bits indicate that the chip
is not rated for that speed.
It has been tested (for chip variant detection, not reliability
of the high speed OPPs) on:
* BeagleBoard C2 (omap3530 600MHz)
* BeagleBoard XM B (dm3730 800MHz)
* GTA04A4 (dm3730 800MHz)
* GTA04A5 (dm3730 1GHz)
Adam Ford (2):
cpufreq: ti-cpufreq: Add support for AM3517
ARM: dts: Add OPP-V2 table for AM3517
H. Nikolaus Schaller (6):
cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
ARM: dts: omap34xx & omap36xx: replace opp-v1 tables by opp-v2 for
DTS: bindings: omap: update bindings documentation
ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430
or ti,omap3630 or ti,am3517
cpufreq: ti-cpufreq: omap36xx use "cpu0","vbb" if run in
multi_regulator mode
ARM: dts: omap36xx: using OPP1G needs to control the abb_ldo
.../devicetree/bindings/arm/omap/omap.txt | 30 +++--
.../bindings/cpufreq/ti-cpufreq.txt | 6 +-
arch/arm/boot/dts/am3517.dtsi | 31 +++++
arch/arm/boot/dts/am3517_mt_ventoux.dts | 2 +-
.../boot/dts/logicpd-som-lv-35xx-devkit.dts | 2 +-
.../boot/dts/logicpd-torpedo-35xx-devkit.dts | 2 +-
arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +-
arch/arm/boot/dts/omap3-beagle.dts | 2 +-
arch/arm/boot/dts/omap3-cm-t3530.dts | 2 +-
arch/arm/boot/dts/omap3-cm-t3730.dts | 2 +-
arch/arm/boot/dts/omap3-devkit8000-lcd43.dts | 2 +-
arch/arm/boot/dts/omap3-devkit8000-lcd70.dts | 2 +-
arch/arm/boot/dts/omap3-devkit8000.dts | 2 +-
arch/arm/boot/dts/omap3-gta04.dtsi | 2 +-
arch/arm/boot/dts/omap3-ha-lcd.dts | 2 +-
arch/arm/boot/dts/omap3-ha.dts | 2 +-
arch/arm/boot/dts/omap3-igep0020-rev-f.dts | 2 +-
arch/arm/boot/dts/omap3-igep0020.dts | 2 +-
arch/arm/boot/dts/omap3-igep0030-rev-g.dts | 2 +-
arch/arm/boot/dts/omap3-igep0030.dts | 2 +-
arch/arm/boot/dts/omap3-ldp.dts | 2 +-
arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +-
arch/arm/boot/dts/omap3-lilly-dbb056.dts | 2 +-
arch/arm/boot/dts/omap3-n9.dts | 2 +-
arch/arm/boot/dts/omap3-n950-n9.dtsi | 7 --
arch/arm/boot/dts/omap3-n950.dts | 2 +-
.../arm/boot/dts/omap3-overo-storm-alto35.dts | 2 +-
.../boot/dts/omap3-overo-storm-chestnut43.dts | 2 +-
.../boot/dts/omap3-overo-storm-gallop43.dts | 2 +-
.../arm/boot/dts/omap3-overo-storm-palo35.dts | 2 +-
.../arm/boot/dts/omap3-overo-storm-palo43.dts | 2 +-
.../arm/boot/dts/omap3-overo-storm-summit.dts | 2 +-
arch/arm/boot/dts/omap3-overo-storm-tobi.dts | 2 +-
.../boot/dts/omap3-overo-storm-tobiduo.dts | 2 +-
arch/arm/boot/dts/omap3-pandora-1ghz.dts | 2 +-
arch/arm/boot/dts/omap3-sbc-t3530.dts | 2 +-
arch/arm/boot/dts/omap3-sbc-t3730.dts | 2 +-
arch/arm/boot/dts/omap3-sniper.dts | 2 +-
arch/arm/boot/dts/omap3-thunder.dts | 2 +-
arch/arm/boot/dts/omap3-zoom3.dts | 2 +-
arch/arm/boot/dts/omap3430-sdp.dts | 2 +-
arch/arm/boot/dts/omap34xx.dtsi | 66 ++++++++--
arch/arm/boot/dts/omap36xx.dtsi | 65 ++++++++--
drivers/cpufreq/cpufreq-dt-platdev.c | 2 +-
drivers/cpufreq/ti-cpufreq.c | 119 +++++++++++++++++-
45 files changed, 320 insertions(+), 80 deletions(-)
--
2.19.1
Powered by blists - more mailing lists