linux-kernel - [PATCH] drm/stm: dsi: higher pll out only in video burst mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1568278589-20400-1-git-send-email-yannick.fertre@st.com>
Date:   Thu, 12 Sep 2019 10:56:29 +0200
From:   Yannick Fertré <yannick.fertre@...com>
To:     Yannick Fertre <yannick.fertre@...com>,
        Philippe Cornu <philippe.cornu@...com>,
        Benjamin Gaignard <benjamin.gaignard@...com>,
        Vincent Abriou <vincent.abriou@...com>,
        David Airlie <airlied@...ux.ie>,
        Daniel Vetter <daniel@...ll.ch>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Alexandre Torgue <alexandre.torgue@...com>,
        <dri-devel@...ts.freedesktop.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH] drm/stm: dsi: higher pll out only in video burst mode

In order to better support video non-burst modes,
the +20% on pll out is added only in burst mode.

Signed-off-by: Philippe Cornu <philippe.cornu@...com>
Reviewed-by: Yannick FERTRE <yannick.fertre@...com>
---
 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
index a03a642..514efef 100644
--- a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
+++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
@@ -260,8 +260,11 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
 	/* Compute requested pll out */
 	bpp = mipi_dsi_pixel_format_to_bpp(format);
 	pll_out_khz = mode->clock * bpp / lanes;
+
 	/* Add 20% to pll out to be higher than pixel bw (burst mode only) */
-	pll_out_khz = (pll_out_khz * 12) / 10;
+	if (mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
+		pll_out_khz = (pll_out_khz * 12) / 10;
+
 	if (pll_out_khz > dsi->lane_max_kbps) {
 		pll_out_khz = dsi->lane_max_kbps;
 		DRM_WARN("Warning max phy mbps is used\n");
-- 
2.7.4