Message-Id: <20190912013740.5638-3-andrew.smirnov@gmail.com>
Date:   Wed, 11 Sep 2019 18:37:40 -0700
From:   Andrey Smirnov <andrew.smirnov@...il.com>
To:     dri-devel@...ts.freedesktop.org
Cc:     Andrey Smirnov <andrew.smirnov@...il.com>,
        Andrzej Hajda <a.hajda@...sung.com>,
        Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
        Tomi Valkeinen <tomi.valkeinen@...com>,
        Cory Tusar <cory.tusar@....aero>,
        Chris Healy <cphealy@...il.com>,
        Lucas Stach <l.stach@...gutronix.de>,
        linux-kernel@...r.kernel.org
Subject: [PATCH v2 2/2] drm/bridge: tc358767: Expose test mode functionality via debugfs

Presently, the driver code artificially limits test pattern mode to a
single pattern with fixed color selection. It being a kernel module
parameter makes switching "test pattern" <-> "proper output" modes
on-the-fly clunky and outright impossible if the driver is built into
the kernel.

To improve the situation a bit, convert current test pattern code to
use debugfs instead by exposing "TestCtl" register. This way old
"tc_test_pattern=1" functionality can be emulated via:

    echo -n 0x78146302 > tstctl

and switch back to regular mode can be done with:

    echo -n 0x78146300 > tstctl

Note that switching to any of the test patterns, will NOT trigger link
re-establishment whereas switching to normal operation WILL. This is
done so:

a) we can isolate and verify (e)DP link functionality by switching to
   one of the test patters

b) trigger a link re-establishment by switching back to normal mode

Signed-off-by: Andrey Smirnov <andrew.smirnov@...il.com>
Cc: Andrzej Hajda <a.hajda@...sung.com>
Cc: Laurent Pinchart <Laurent.pinchart@...asonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@...com>
Cc: Cory Tusar <cory.tusar@....aero>
Cc: Chris Healy <cphealy@...il.com>
Cc: Lucas Stach <l.stach@...gutronix.de>
Cc: dri-devel@...ts.freedesktop.org
Cc: linux-kernel@...r.kernel.org
---
 drivers/gpu/drm/bridge/tc358767.c | 152 ++++++++++++++++++++++++------
 1 file changed, 125 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 8532048e0550..dfac0ce16636 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -17,6 +17,7 @@
 
 #include <linux/bitfield.h>
 #include <linux/clk.h>
+#include <linux/debugfs.h>
 #include <linux/device.h>
 #include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
@@ -222,11 +223,10 @@
 #define COLOR_B			GENMASK(15, 8)
 #define ENI2CFILTER		BIT(4)
 #define COLOR_BAR_MODE		GENMASK(1, 0)
+#define COLOR_BAR_MODE_NORMAL	0
 #define COLOR_BAR_MODE_BARS	2
-#define PLL_DBG			0x0a04
 
-static bool tc_test_pattern;
-module_param_named(test, tc_test_pattern, bool, 0644);
+#define PLL_DBG			0x0a04
 
 struct tc_edp_link {
 	struct drm_dp_link	base;
@@ -265,6 +265,9 @@ struct tc_data {
 	/* HPD pin number (0 or 1) or -ENODEV */
 	int			hpd_pin;
 
+	struct mutex		tstctl_lock;
+	bool			enabled;
+
 	struct regulator	*vdcc;
 };
 
@@ -789,16 +792,6 @@ static int tc_set_video_mode(struct tc_data *tc,
 	if (ret)
 		return ret;
 
-	/* Test pattern settings */
-	ret = regmap_write(tc->regmap, TSTCTL,
-			   FIELD_PREP(COLOR_R, 120) |
-			   FIELD_PREP(COLOR_G, 20) |
-			   FIELD_PREP(COLOR_B, 99) |
-			   ENI2CFILTER |
-			   FIELD_PREP(COLOR_BAR_MODE, COLOR_BAR_MODE_BARS));
-	if (ret)
-		return ret;
-
 	/* DP Main Stream Attributes */
 	vid_sync_dly = hsync_len + left_margin + mode->hdisplay;
 	ret = regmap_write(tc->regmap, DP0_VIDSYNCDELAY,
@@ -1150,14 +1143,6 @@ static int tc_stream_enable(struct tc_data *tc)
 
 	dev_dbg(tc->dev, "enable video stream\n");
 
-	/* PXL PLL setup */
-	if (tc_test_pattern) {
-		ret = tc_pxl_pll_en(tc, clk_get_rate(tc->refclk),
-				    1000 * tc->mode.clock);
-		if (ret)
-			return ret;
-	}
-
 	ret = tc_set_video_mode(tc, &tc->mode);
 	if (ret)
 		return ret;
@@ -1186,12 +1171,8 @@ static int tc_stream_enable(struct tc_data *tc)
 	if (ret)
 		return ret;
 	/* Set input interface */
-	value = DP0_AUDSRC_NO_INPUT;
-	if (tc_test_pattern)
-		value |= DP0_VIDSRC_COLOR_BAR;
-	else
-		value |= DP0_VIDSRC_DPI_RX;
-	ret = regmap_write(tc->regmap, SYSCTRL, value);
+	ret = regmap_write(tc->regmap, SYSCTRL,
+			   DP0_AUDSRC_NO_INPUT | DP0_VIDSRC_DPI_RX);
 	if (ret)
 		return ret;
 
@@ -1250,8 +1231,13 @@ static void tc_bridge_enable(struct drm_bridge *bridge)
 {
 	struct tc_data *tc = bridge_to_tc(bridge);
 
+	mutex_lock(&tc->tstctl_lock);
+
 	if (!__tc_bridge_enable(tc))
 		drm_panel_enable(tc->panel);
+
+	tc->enabled = true;
+	mutex_unlock(&tc->tstctl_lock);
 }
 
 static int __tc_bridge_disable(struct tc_data *tc)
@@ -1273,8 +1259,13 @@ static void tc_bridge_disable(struct drm_bridge *bridge)
 {
 	struct tc_data *tc = bridge_to_tc(bridge);
 
+	mutex_lock(&tc->tstctl_lock);
+
 	drm_panel_disable(tc->panel);
 	__tc_bridge_disable(tc);
+
+	tc->enabled = false;
+	mutex_unlock(&tc->tstctl_lock);
 }
 
 static void tc_bridge_post_disable(struct drm_bridge *bridge)
@@ -1386,6 +1377,99 @@ static enum drm_connector_status tc_connector_detect(struct drm_connector *conne
 		return connector_status_disconnected;
 }
 
+static int tc_tstctl_set(void *data, u64 val)
+{
+	struct tc_data *tc = data;
+	int ret;
+
+	mutex_lock(&tc->tstctl_lock);
+
+	if (!tc->enabled) {
+		dev_err(tc->dev, "bridge needs to be enabled first\n");
+		ret = -EBUSY;
+		goto unlock;
+	}
+
+	if (FIELD_GET(COLOR_BAR_MODE, val) == COLOR_BAR_MODE_NORMAL) {
+		ret = regmap_write(tc->regmap, SYSCTRL, DP0_VIDSRC_DPI_RX);
+		if (ret) {
+			dev_err(tc->dev,
+				"failed to select dpi video stream\n");
+			goto unlock;
+		}
+
+		ret = regmap_write(tc->regmap, TSTCTL, val | ENI2CFILTER);
+		if (ret) {
+			dev_err(tc->dev, "failed to set TSTCTL\n");
+			goto unlock;
+		}
+
+		ret = tc_pxl_pll_dis(tc);
+		if (ret) {
+			dev_err(tc->dev, "failed to disable PLL\n");
+			goto unlock;
+		}
+
+		/*
+		 * Re-establish DP link
+		 */
+		ret = __tc_bridge_disable(tc);
+		if (ret)
+			goto unlock;
+
+		ret = __tc_bridge_enable(tc);
+		if (ret)
+			goto unlock;
+	} else {
+		ret = tc_pxl_pll_en(tc, clk_get_rate(tc->refclk),
+				    1000 * tc->mode.clock);
+		if (ret) {
+			dev_err(tc->dev, "failed to enable PLL\n");
+			goto unlock;
+		}
+
+		ret = regmap_write(tc->regmap, TSTCTL, val | ENI2CFILTER);
+		if (ret) {
+			dev_err(tc->dev, "failed to set TSTCTL\n");
+			goto unlock;
+		}
+
+		ret = regmap_write(tc->regmap, SYSCTRL, DP0_VIDSRC_COLOR_BAR);
+		if (ret) {
+			dev_err(tc->dev, "failed to set SYSCTRL\n");
+			goto unlock;
+		}
+	}
+
+unlock:
+	mutex_unlock(&tc->tstctl_lock);
+	return ret;
+}
+/*
+ * "tstctl" attribute has the following format:
+ *
+ *     RR_GG_BB_0_P
+ *
+ * "RR" is red, "GG" is green and "BB" is blue color components (byte
+ * each) used for various test patterns controlled by this register.
+ *
+ * "P" represents test pattern of the bridge. Valid values are:
+ *
+ *    "0" - normal operation
+ *    "1" - solid color test pattern
+ *    "2" - color bar test pattern
+ *    "3" - "checkers" test pattern
+ *
+ * This way old "tc_test_pattern=1" functionality can be emulated via:
+ *
+ *     echo -n 0x78146302 > tstctl
+ *
+ * and switch back to regular mode can be done with:
+ *
+ *     echo -n 0 > tstctl
+ */
+DEFINE_SIMPLE_ATTRIBUTE(tc_tstctl_fops, NULL, tc_tstctl_set, "%llu\n");
+
 static const struct drm_connector_funcs tc_connector_funcs = {
 	.detect = tc_connector_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
@@ -1528,9 +1612,15 @@ static irqreturn_t tc_irq_handler(int irq, void *arg)
 	return IRQ_HANDLED;
 }
 
+static void tc_remove_debugfs(void *data)
+{
+	debugfs_remove_recursive(data);
+}
+
 static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	struct device *dev = &client->dev;
+	struct dentry *debugfs;
 	struct tc_data *tc;
 	int ret;
 
@@ -1539,6 +1629,7 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		return -ENOMEM;
 
 	tc->dev = dev;
+	mutex_init(&tc->tstctl_lock);
 
 	/* port@2 is the output port */
 	ret = drm_of_find_panel_or_bridge(dev->of_node, 2, 0, &tc->panel, NULL);
@@ -1690,6 +1781,13 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 	i2c_set_clientdata(client, tc);
 
+	debugfs = debugfs_create_dir(dev_name(dev), NULL);
+	if (!IS_ERR(debugfs)) {
+		debugfs_create_file_unsafe("tstctl", 0200, debugfs, tc,
+					   &tc_tstctl_fops);
+		devm_add_action_or_reset(dev, tc_remove_debugfs, debugfs);
+	}
+
 	return 0;
 }
 
-- 
2.21.0

Powered by blists - more mailing lists