linux-kernel - [RFC PATCH 12/15] spi: spi-loopback-test: use new `delay` field

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190913114550.956-13-alexandru.ardelean@analog.com>
Date:   Fri, 13 Sep 2019 14:45:47 +0300
From:   Alexandru Ardelean <alexandru.ardelean@...log.com>
To:     <linux-spi@...r.kernel.org>, <linux-iio@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-tegra@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <bcm-kernel-feedback-list@...adcom.com>
CC:     <jic23@...nel.org>, <broonie@...nel.org>, <f.fainelli@...il.com>,
        <linus.walleij@...aro.org>, <orsonzhai@...il.com>,
        <baolin.wang@...aro.org>, <zhang.lyra@...il.com>,
        Alexandru Ardelean <alexandru.ardelean@...log.com>
Subject: [RFC PATCH 12/15] spi: spi-loopback-test: use new `delay` field

This change replaces the use of the `delay_usecs` field with the new
`delay` field. The code/test still uses micro-seconds, but they are now
configured and used via the `struct spi_delay` format of the `delay` field.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@...log.com>
---
 drivers/spi/spi-loopback-test.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-loopback-test.c b/drivers/spi/spi-loopback-test.c
index 6f18d4952767..b6d79cd156fb 100644
--- a/drivers/spi/spi-loopback-test.c
+++ b/drivers/spi/spi-loopback-test.c
@@ -298,12 +298,18 @@ static struct spi_test spi_tests[] = {
 			{
 				.tx_buf = TX(0),
 				.rx_buf = RX(0),
-				.delay_usecs = 1000,
+				.delay = {
+					.value = 1000,
+					.unit = SPI_DELAY_UNIT_USECS,
+				},
 			},
 			{
 				.tx_buf = TX(0),
 				.rx_buf = RX(0),
-				.delay_usecs = 1000,
+				.delay = {
+					.value = 1000,
+					.unit = SPI_DELAY_UNIT_USECS,
+				},
 			},
 		},
 	},
@@ -537,7 +543,7 @@ static int spi_test_check_elapsed_time(struct spi_device *spi,
 		unsigned long long nbits = (unsigned long long)BITS_PER_BYTE *
 					   xfer->len;
 
-		delay_usecs += xfer->delay_usecs;
+		delay_usecs += xfer->delay.value;
 		if (!xfer->speed_hz)
 			continue;
 		estimated_time += div_u64(nbits * NSEC_PER_SEC, xfer->speed_hz);
-- 
2.20.1